Showing posts with label print server. Show all posts
Showing posts with label print server. Show all posts

Wednesday, July 18, 2012

D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server Review

D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server
Average Reviews:

(More customer reviews)
Works fine. set up three of them on my network. 3 XP Pro computes computers and one running Win 98SE. Need to change the defauld IP addresss on each additional DP-301P+ after you use the default ip address for the first one (using the web browser to access the units ). For win 98 you have to go read the manual on the CD (a .PDF file) for installing on win 98, and ME ect..and run the included software to install the print client for the network. On win XP all you have to do is set the IP address, look at the port name in the configuration screen, and then use the win XP "install printer wizard" using the ip addrss and port name per the instructions.. I.E. the guy below who could not install it using ME apparantly did not read the Manusl on the CD for specific instructions for installing on a Win 98, or ME computer ..nor did he run the software needed to make it work on Win 98 or ME.

Click Here to see more reviews about: D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server



Buy NowGet 29% OFF

Click here for more information about D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server

Read More...

Wednesday, June 27, 2012

Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT Review

Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT
Average Reviews:

(More customer reviews)
Out of the box this device has clear directions. I did not believe them so I just plugging in the CD and blindly followed the steps to first setting up the print server on the wireless router then setting it up on each computer separately. The trick was to have the computer already using the printer before setting up the print server. The software does all the work and uses the DHCP from the router.
Just a note I did set up the WAP as I have neighbors.
Even with the server hidden behind the printer I get reception a hundred feet away with no problem. I have not tried farther.


Click Here to see more reviews about: Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT



Buy Now

Click here for more information about Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT

Read More...

Tuesday, June 5, 2012

D-Link DP-311P Wireless Print Server, 1-Centronics Port, 802.11b, 11 Mbps Review

D-Link DP-311P Wireless Print Server, 1-Centronics Port, 802.11b, 11 Mbps
Average Reviews:

(More customer reviews)
I got this product recently, before I purchased it, I viewed some negative reviews on this DP-311P, but I still bought it and tried it out, it took me only about 10 minutes to finish. The user manual sucks, doesn't tell you very detailed what to do with different network situation, that is why some customers don't know what to do if they are not using D-Link wireless router. First, you need to change the IP address on one of your computers which has a wireless adapter to 192.168.0.XX with subnet mask 255.255.255.0 which means change the computer's IP same as DP-311P default IP scheme, so you can communicate with it. Remember before you do it, set the little switch on the back of 311P to "configure" position. After you changed the computer's IP, use either the wireless adapter connection wizard, or use ad-hoc to connect to 311P, then start IE/browser to access 192.168.0.10, you will see the configuration interface, from there you change the network settings to your existing network scheme (e.g. change IP address to 192.168.1.10 if you have Linksys router...), as well as the wireless settings. Some customers said 128bit encription deson't work, you have to change everything to 64bit, that is not correct. I sucessfully set it to use 128bit without any problem. Instead of using browswer to access the interface, you can also install the ps admin software come with the CD, start the program, it will find the server, you will be able to change all above settings within the program interface. After finish, remember set the back switch to "normal" position. Now, change your computer's IP back to original. Now your Print server should be ready to use. To add the printer, go to control panel and add printer from there, change the port to D-Link printer port and specify the IP address you gave the print server, such as 192.168.1.10. Print a test page, you are done. It is very easy.

Click Here to see more reviews about: D-Link DP-311P Wireless Print Server, 1-Centronics Port, 802.11b, 11 Mbps

The D- Link DP-311P is a compact, 802.11b compatible, wireless print server that allows network users to share a legacy printer. The DP-311P is equipped with one parallel Centronics port for seamless connection to older printers and supports both infrastructure and ad hoc wireless modes. The DP-311P has easy to use configuration tools including a Web Browser and Windows-based configuration program.The DP-311P print server is the ideal network printing solution for small offices, home offices, schools and other businesses that require printer sharing.

Buy Now

Click here for more information about D-Link DP-311P Wireless Print Server, 1-Centronics Port, 802.11b, 11 Mbps

Read More...

Friday, May 25, 2012

Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server Review

Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server
Average Reviews:

(More customer reviews)
Don't get me wrong... this router works great, as a router. But not as a print server. Very few printers are supported, and Belkin doesn't tell you that until after you buy it. So bottom line, make sure you check and see if your printer is supported before you buy this for a print server. Mine didn't make the list.
http://web.belkin.com/support/printserver/list.asp

Click Here to see more reviews about: Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server



Buy Now

Click here for more information about Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server

Read More...

Tuesday, May 15, 2012

D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port Review

D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port
Average Reviews:

(More customer reviews)
Most people complained about not getting WPA support and hence gave this product low scores. First, the new version already supports WPA. If you've got an old model, you can also download the firmware to upgrade.
I originally bought the linksys print server with the parallel port. That product sucks big time. Never work and when you contact support, they just tell you your printer is not supported besides asking silly questions like did you chose the printer as your default printer.
The D-Link print server works well. Not sure about durability since I just got it today and spent less than 15 min to set it up. Should have ignored the negative reviews and bought this instead of the linksys one. Would have saved a lot of time.

Click Here to see more reviews about: D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port

The D-Link DP-G321 is an 802.11g Wireless Multi-Port Print Server that connects up to two USB printers and one parallel printer to your network. You can share your printers on the network using wireless connectivity or via an Ethernet connection. With support for remote printing, your printers are available online for receiving print jobs from anywhere via the Internet or your local Intranet. Simplify the process of sharing printers on a wireless network with the DP-G321.

Buy Now

Click here for more information about D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port

Read More...

Monday, May 7, 2012

D-Link DPR-1260 RangeBooster G Multifunction Print Server Review

D-Link DPR-1260 RangeBooster G Multifunction Print Server
Average Reviews:

(More customer reviews)
Okay. It isn't perfect. Installation isn't as easy as it should be. Instructions aren't as good as they should be. Some printers work with it, and apparently some don't.
But go look at the ratings on all the other print servers. You'll see the same problems. I tried at least three others, and couldn't get any of them to work. I've been able to successfully get this print server to work with an Epson R300 (USB 1.1), a Canon MP830 all-in-one(USB 2, print only), and even a Lexmark Optra T610 laser printer(parallel, with a USB-to-parallel adapter from Belkin).
Printer manufacturers have gone nuts with bi-directional information going back and forth between the printer and the computer. The result: really pretty printer drivers that give you loads of information and options, but depend on the printer being physically connected to the computer. But when you want to easily share that printer with a bunch of other people (especially a bunch of people with laptops), it's much more difficult. Either everybody has to swap cables, or you buy a print server--and give up the pretty driver screens that pop up to tell you to buy more ink.
The D-Link DPR-1260 is the only one I could find that actually listed compatible printers on the box. They say that they tested with 100 different printers. I believe it. Their competitors don't seem to have done nearly as much testing.
If you aren't comfortable setting up a wireless router on your own, or if you needed help installing your printer the first time, don't buy this. If you can figure out what the d-link is doing by setting ports on your printers to print to an IP address, give it a try.
If the market had some better entries, I probably wouldn't rate this with 5 stars. But it appears to me to be the cream of the crop.
Update (12/2007): We've had it for about a year, and we've had trouble a number of times. It repeatedly loses settings. If I could reduce the number of stars, I'd give it two or three.


Click Here to see more reviews about: D-Link DPR-1260 RangeBooster G Multifunction Print Server



Buy NowGet 61% OFF

Click here for more information about D-Link DPR-1260 RangeBooster G Multifunction Print Server

Read More...

Saturday, April 21, 2012

Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support Review

Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support
Average Reviews:

(More customer reviews)
Once you get this gizmo going, it works nicely. You can connect multiple computers on your home network to a printer that's within WiFi range. But setting it up is a challenge, because you have to do exactly the right things in exactly the right sequence, and some of the things you have to do right aren't mentioned in the setup wizard that runs when you insert the Linksys setup CD into your computer, or they're mentioned so late in the process that you may have to start all over again!
The process takes about 90 minutes if you do everything right the first time around and don't have to double back. Most of the time you're watching software load - it's as exciting as watching paint dry. Here's what you have to do, as far as I'm able to recount from having just done it for a friend's home network. If you think the following is written in Greek or maybe in Geek, get someone else to do this for you. If you're up to the challenge, this review may save you time and frustration and prevent more 1-star reviews.
(1) Before you set the print server up, it's a good idea to go to the web site of the company that makes your router (Linksys, D-Link, Netgear, etc.) and download and install the latest "firmware" for your router. That takes maybe 15 minutes.
(2) Move the printer close to the PC that's connected to your wireless router. It has to be close enough to the router for you to connect it via a standard Ethernet ("patch" or "Internet") cable. It's not a big deal, but it means you may have to set the printer up in one place and then move it back to where you want it to be. (Linksys supplies the necessary cables in the box, which is to their credit. Most printer manufacturers make you buy your own cable.)
(3) The printer needs to be set up on the computer using a wired (USB) connection *before* you try to set up the wireless connection. If you're just going wireless with a printer you've already installed on the PC that's connected to your WiFi router, you're all set. But if you're installing a new printer, or trying to go wireless with a printer you've moved from some other computer, be sure to install it as a USB printer first. (3-a) Once you have the printer set up as a wireless "network" computer, you may want to uninstall the USB version of the same printer, because when you boot up, some versions of Windows will give you endless warnings that the local printer isn't connected. (3-b) This also means that if you ever buy a new printer and you want to connect it wirelessly via the Linksys print server, you have to install it first as a (wired) USB printer, and then re-run the "Set Up Computer" wizard from the CD that comes with the Linksys. Don't lose that CD!
(4) The setup wizard asks for a password for the print server. You can use any password you like, BUT then it asks for a passphrase, and the wizard fails to point out that you need the exact WEP passphrase or WEP key you've (already) used to set up your wireless router. (You are using WEP or stronger security on your wireless router, right? If not, go find out how to set up WEP security and do it immediately.) (4-a) The setup wizard asks for a passphrase, but if you've used a passcode on your router, there's a way to enter it you look carefully at the screen.
(5) Once you complete setting up the wireless print server, the wizard leads you through setting up your computer. Again, you must have already installed the printer onto the computer via a USB cable before you get to this point! Follow the instructions and by gosh - it works! Then at the very end there's a small note saying that if you want to set up other computers, you have to install the printer drivers first. Nice of Linksys to point that out at the very end; it would have saved me an hour of messing around if they'd said that at the beginning!
(6) Once the printer is set up, it's the default printer, and it wasn't possible (at least for me, with Windows XP) to set a different printer up as the default printer on one of the computers on my home friend's network. A minor irritation, in most cases, and there may be a workaround. If I find it I'll add it to this review.
So: 5 stars for convenience once it's set up; 3 stars for the glitch with the default; 2 stars for poor setup instructions... how do you rate this thing? 4 stars, I guess.


Click Here to see more reviews about: Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support



Buy Now

Click here for more information about Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support

Read More...

Saturday, March 17, 2012

Cisco-Linksys WPS54G Wireless-G 802.11g Print Server Review

Cisco-Linksys WPS54G Wireless-G 802.11g Print Server
Average Reviews:

(More customer reviews)
Cisco may be engaging in unlawful and deceptive trade practices by stating that this print server will work with "most" type 1 & 2 USB printers. What does "most" mean?
I spent 6.5 hours on the phone with Linksys techs trying to get connected to my Canon i850s. Nothing on the web site, disc manual or box listing printers it would not work with--a clear failure to inform when they have to know it won't.
One of the questions the techs ask is whether you are running a multifunction printer. (I wasn't.)Apparently this print server does not work with many multifunction printers, but Linksys and Cisco do not state that anywhere that I could find. (After I buy the thing is not the time to find out I got the wrong product.)
Finally a senior tech came online and said the print server would not work with my printer. I asked him for a list of printers that it would work with and he listed a few, but he said they were not allowed to put the list up on the web site.
Whoah! So that's why I spend 6.5 hours to find out your product does not work. [...]
Others, save yourself the headache, buy someone else's product.

Click Here to see more reviews about: Cisco-Linksys WPS54G Wireless-G 802.11g Print Server



Buy Now

Click here for more information about Cisco-Linksys WPS54G Wireless-G 802.11g Print Server

Read More...

Tuesday, March 13, 2012

TRENDnet 3-Port Print Server TE100-P21 (Blue) Review

TRENDnet 3-Port Print Server TE100-P21 (Blue)
Average Reviews:

(More customer reviews)
After unpacking the print server I was up and printing within 15 minutes on both printers from both computers in my network. It took me a couple of minutes to get the utility "PS-Utility" to see the print server by disabling the Windows firewall and then discovering that I could add the utility to the exceptions list in order to enable to firewall again. I am able to access all printer specific functions through the drivers as if the printers were connected directly to the computer.
It has been a couple of days and I have had no problems.
Configuration:
-Operating System: Windows XP Professional and Windows XP Home.
-Router: Linksys WRT55AG
-Print server: TRENDnet TE100-P21
-Dell XPS Gen 3 Desktop connected to router via enet cable.
-Dell Lattitude laptop connected to router via wireless link.
-Printers: Cannon IP5000 to USB1 and HP Laserjet 5L to LPT3 of the print server.


Click Here to see more reviews about: TRENDnet 3-Port Print Server TE100-P21 (Blue)



Buy NowGet 26% OFF

Click here for more information about TRENDnet 3-Port Print Server TE100-P21 (Blue)

Read More...

Sunday, February 26, 2012

Linksys WPSM54G Wireless-G USB Print Server Review

Linksys WPSM54G Wireless-G USB Print Server
Average Reviews:

(More customer reviews)
You might like to read this review if you're planning on installing Windows Vista or Windows 7.
I bought the refurbished version of this router. As far as I can tell, it's exactly the same except that it has the most current firmware pre-installed.
I used the Linksys CD to install it, and following the Step 1 instructions I managed to configure the Print Server very easily.
However, when I then proceeded to the next stage (Configuring your computer to see the wireless router via your wireless home network), the CD just pooped out, saying it wouldn't work with my operating system. No 'sorry', no help, just a dead end.
Fortunately, I found a website where it gives you the instructions, and within five minutes it was working perfectly. I'm going to try to include a link, but in case it doesn't work, type into google ehow WPSM54G and hopefully the first link will be How to set up a Linksys WPSM54G or PSUS4 print server under Windows XP, Vista, Vista 64, Windows 7, or Linux. Here's the link - [...]
Follow the instructions for Step 2 and you should be golden!

Click Here to see more reviews about: Linksys WPSM54G Wireless-G USB Print Server



Buy Now

Click here for more information about Linksys WPSM54G Wireless-G USB Print Server

Read More...

Friday, February 24, 2012

Airlink101 AMPS240W Wireless Multi-Functional Print Server Review

Airlink101 AMPS240W Wireless Multi-Functional Print Server
Average Reviews:

(More customer reviews)
Must use static ip address for it to work with any OS. Then set the wireless connection.
You also have to download your specific printer driver onto the computer that is going to
use the printer. Add a network printer on the computer, it will show if you setup the wireless correctly.
Once priner show up, choose a manual connection by supplying the static ip set. Print test page and you are good to go.

Click Here to see more reviews about: Airlink101 AMPS240W Wireless Multi-Functional Print Server



Buy Now

Click here for more information about Airlink101 AMPS240W Wireless Multi-Functional Print Server

Read More...

Tuesday, February 21, 2012

Cisco-Linksys EPSX3 EtherFast 10/100 3-port PrintServer Review

Cisco-Linksys EPSX3 EtherFast 10/100 3-port PrintServer
Average Reviews:

(More customer reviews)
The hardware installation was easy connected to my network with no problem. Software instalation and server setup could be a little more complicated if you did not have any knowledge of networking and the use of IP address and DHCP servers and what there fubcions are. The instructions need to be read carefully to get all the hidden items. I just installed the driver on all my Windows machines and the Printserver manager on one PC per the instructions.

If you use DHCP to give out IP address the print server has to have a permanent address. The networking protocol should be set to TCP/IP.
I have a Brother HL1250 laser printer, Panasonic KX-P2123 pin printer and a Canon BJC600e inkjet connected to the printserver.
Each printer is set to its own port.
I am able to print from the followwing PC operating system with this print server, Novell 5.0, Windows NT, Windows 2000, Windows 98se, and SuSE Linux 6.4.
The Linux setup setup was much more complicated as printer definition files had to be reconfigured but any good Linux user should be able to do this with no problem, I am a novice Linux user.
This is a solid product. It is the best printserver I have ever had. The documentation could use a little more work.

Click Here to see more reviews about: Cisco-Linksys EPSX3 EtherFast 10/100 3-port PrintServer

The Linksys EtherFast 10/100 3-Port PrintServer is the easiest and quickest way to add one, two, or even three printers to your 10BaseT or Fast Ethernet network. Whether you're building a Fast Ethernet network now or later, the PrintServer automatically adjusts itself to either 10 Mbps or 100 Mbps speeds.
A stand-alone solution that doesn't require a dedicated print server PC, the PrintServer houses three high-speed parallel ports that can handle incoming print jobs concurrently. That means you can put printers on your network where you need them most without having to worry about printing bottlenecks. Equipped with Direct Memory Access (DMA) technology, a 128 KB buffer, and automatic collision control, the PrintServer can process print jobs up to 50 percent faster than regular print servers--even on jobs with complex graphics and layouts.

Buy Now

Click here for more information about Cisco-Linksys EPSX3 EtherFast 10/100 3-port PrintServer

Read More...

Saturday, February 4, 2012

Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch Review

Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch
Average Reviews:

(More customer reviews)
Like a number of the other reviews mentioned, the PSUS4 works fine as a printserver but the included setup software isn't worth even removing from the box. I am by no means a networking expert but I had the time to tinker with the device and found that you really need to be ready to configure the PSUS4 directly using your browser and then configure each computer for local printing by creating a new TCP/IP port using the IP address of the unit and configuring it for printing to "USB1". If this sounds complicated it really isn't and with a bit of searching you can find quick and easy instructions from an article on the Linksys website (note the lack of mentioning USB1 in the article).
Long story short, don't buy this if you want plug and play but if you have a basic understanding of networking you will find this works fine after a bit of a painful initial setup. I found that it took much longer just to find the information I needed than actually setting up the unit.

Click Here to see more reviews about: Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch

MODEL- PSUS4 VENDOR- LINKSYSFEATURES- PrintServer for USB with 4 port Switch Share your USB printer and expand your network with one compact box! The Linksys PrintServer for USB with 4-Port Switch is a doubleupgrade for your network. First it lets you connect a USB printerdirectly to your network eliminating the need to dedicate a PC toprint serving chores. Using a PrintServer frees up your "print share PC" so you do not have to leave it on all the time. It alsoremoves the printing bottleneck and sets your PC free to do moreuseful work. In addition the PrintServer includes a 4-port 10/100 switch so you can easily add more devices to your network. All four ports are auto speed negotiating and have automatic MDI/MDI-X crossover detection so you do not have to worry about the cable type. Each port independently negotiates the best speed and half- or full-duplex mode for up to 200Mbps of bandwidth per port. Fast store-and-forward switching prevents damaged packets from being passed oninto the network. A user-friendly Setup Wizard makes installation easy the compact case fits anywhere and the one megabyte print buffer size handles even large graphics-intensive print jobs. Let the LinksysPrintServer for USB with 4-Port Switch bring efficiency to your printing tasks and expand your network in one cost-effective device.* Share a printer with everyone on your networkworks with most USBprinters. * Connect your printer directly to the network with no need to dedicate aPC to print server chores. * Also expands your network with a built-in 4-port 10/100 Ethernet switch* Remotely administered through your web browser or the included utility. SPECIFICATIONs CONNECTORs- (4) 10BaseT/100BaseTX/RJ45 ports(1) USB port

Buy Now

Click here for more information about Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch

Read More...

Monday, December 26, 2011

Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0 Review

Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0
Average Reviews:

(More customer reviews)
After reading the mixed reviews for this, I still decided to try the Linksys Wireless Print Server. Although this is more expensive than the wired print server, I thought that it may be nice to locate my printers (one is USB and the other is parallel/USB) and wireless router in different locations. Neither printer is multi-function. I first tried a "wired" Linksys print server, but was unable to connect (2) USB printers using a hub - plus the price of the print server and the hub was nearly the same as the wireless device.
So far so good, but there are some things that I suggest you do when installing this device. These are based on personal experience, which has been a process of educated trial and error. An IT professional may do things differently, but if you were an IT professional, you probably wouldn't be reading these reviews. My network is almost entirely Linksys components (wireless router, wireless adapter, and print server), although I am using the network cards that were pre-installed with those computers that are hard wired to the router.
First, disable your firewall. This will allow you to test the compatibility of the printers, the network, and the print sever without the extra component to worry about. Once everything is up and running, you can enable your firewall and tweak any networking restrictions at that time.
Secondly, when configuring the router (which is the first step), you will need to have this "wired" to your router. This is part of the instructions, and should not come as a surprise. However, make sure you leave this "wired" until you have installed the print server drivers and software on all your networked computers. The install utility seems to have trouble finding the print server if you have disconnected the hard wire connection, even if the print server lights indicate it is already on the wireless LAN.
Thirdly, if you are using MAC address filtering, temporarily disable this. One you get the print server set up and running, you can find its MAC address using the web utility or the BI-admin utility, and then restore the filtering after adding the print server. However, if you want to use the web based configuration utility (like you use with your router), please follow the instructions in the following paragraph.
Fourth, once you have installed everything per the instructions, I recommend the following: give your print server a fixed IP address on your network (e.g. 192.168.1.171). My experience is this: If your router uses DHCP to assign IP addresses to your networked computers and servers, the print server does not always communicate back to the router, and your print server will sometimes "disappear" from your network after computers have been turned off and on. Something to do with the order the computers and servers are turned on. Setting this to a fixed address has cleared up those problems for me. Also, because the print server's address is fixed, you can access the web based configuration utility by typing in the same IP address each time.
Fifthly, find the MAC address using the web based or BI-admin utility. Now, if you are using these, reinstate your MAC address filtering, adding your print server's address to the allowed list.
Sixth, test and test again. Reboot your computers and unplug and re-plug your print server. Send documents to all your printers from all your computers - not just printer test pages. Print actual documents from a "Wordpad" or similar program.
Seventh, enable your firewall, remembering to enable access to your print server at the fixed IP address used above.
Eighth, test again just to make sure. If it doesn't work now, you know it's the network settings of your firewall.
This has seemed to work for me.


Click Here to see more reviews about: Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0

The Linksys Wireless-G PrintServer for USB 2.0 lets you connect a USB or parallel printer (or both!) directly to your network, eliminating the need to dedicate a PC to print sharing chores.Using a PrintServer frees up your "print share PC" so you don't have to leave it on all the time.It also removes the printing bottleneck, and sets your PC free to do more useful work.Connect the PrintServer directly to your network by 10/100 Ethernet cable, or wirelessly over 54Mbps Wireless-G (802.11g).The wireless option lets you put your printers wherever you want to, without having to run cables.Whichever way the PrintServer is attached to your network, both your wireless and wired PCs will have access to it, and the printers it's connected to.And if you don't use wireless for general networking in your office, you can still use the Wireless-G connection in ad-hoc mode to print from visiting Wireless-G and Wireless-B PCs.The USB port is compatible with USB 1.1 printers, as well as printers that support the new high-speed USB 2.0 specification for even faster throughput.There's also a separate port for a standard parallel printer.For even more versatility, you can connect two printers, one to each port, and send your documents to whichever one is most appropriate for each print job.A user-friendly Setup Wizard makes installation easy, the compact case fits anywhere, and the three megabyte print buffer size handles even large graphics-intensive print jobs.Let the Linksys Wireless-G PrintServer for USB 2.0 bring efficiency to your printing tasks.

Buy NowGet 20% OFF

Click here for more information about Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0

Read More...

Monday, October 24, 2011

Belkin F1UP0001 Wireless USB Print Server Review

Belkin F1UP0001 Wireless USB Print Server
Average Reviews:

(More customer reviews)
I spent lots of time with old ethernet/parallel print servers that wouldn't quite work with GDI and other low cost printers.
I was skeptical that this would work.
I was impressed that this print server worked with an easy 5 minute guided setup on my Minolta 1250W GDI printer.
The range of the wireless (Im using B, not G) is fine (covers whole floor of large home).
This device is an excellent solution for putting 2 USB printers anywhere you want them without dealing with the 16ft limitation of USB, or having to run any ethernet or parallel wires.
(I don't have to cut and run any wires in my new home). Plus
you get added bonus of having a normal cheap ($100~) printer
become a networked printer for all to share. (and you don't
have to have the original host computer on to print, as you
would with USB.)

Click Here to see more reviews about: Belkin F1UP0001 Wireless USB Print Server

The Belkin 802.11g Wireless Print Server lets you easily add two USB printers to your wireless, or wired network. It features 802.11g technology that makes sending print jobs faster than ever, and includes a memory buffer that handles your graphics jobs effortlessly.The Print Server is so easy to install, youll be printing in minutes. Simply load your printer drivers on each computer, run the Belkin Easy Installation CD, attach your USB printer to the Belkin 802.11g Wireless Print Server and you are now free to print wireless from around the home or office. It is also compatible with wired networks through its integrated Ethernet Port.Compatible with most USB, network-ready printers, and major operating systems, your 802.11g Wireless Print Server from Belkin delivers even your most data-intensive print jobs with maximum speed and reliability.

Buy Now

Click here for more information about Belkin F1UP0001 Wireless USB Print Server

Read More...

Sunday, October 16, 2011

TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue) Review

TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue)
Average Reviews:

(More customer reviews)
I converted my LaserJet 5MP (what a workhorse!) to wireless with this unit. It communicates well with the Ubuntu and Windows Vista laptops in the house. Wireless printing is much more convenient than print sharing since you don't have to turn on an extra machine to act as a server.
The documentation could be better and you need a Windows computer (or WINE) to get this running because the web interface doesn't work out of the box. But it's been running fine for weeks now that I've installed it.
I haven't had a problem with signal strength at all and my printer is upstairs while my computer is often downstairs.
I would recommend this adapter with the caveat that it's easy to set up if you know the basics of home networks. From the other reviews and comments, I'd say that if you don't know what an IP address is or how to install a networked printer on your OS, you might want to look elsewhere for something simpler to install.

Click Here to see more reviews about: TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue)



Buy NowGet 19% OFF

Click here for more information about TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue)

Read More...

Sunday, October 2, 2011

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver) Review

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)
Average Reviews:

(More customer reviews)
The print server hardware worked fine, but the setup software
caused a few problems as a result of oversimplication.

I was able to get the server going with a Brother HL-5150D USB
printer on a home network with 4 computers (3 wireless, 1
ethernet), an all-in-one networked device and the USB
printer itself. This is using a mixture of computers with
different flavours of Windows XP. The print server is wired to
a router using DHCP. I did not chose to put the print server on
a static address (as the manual prefers) since that does not
reflect my network setup (home networks are usually DHCP).
I encountered problems because:
(a) My software firewall first caused the installer to crash.
I wanted to avoid turning it off entirely, but
to no avail. I was able to leave my router's hardware
firewall on but had to turn off my software firewall
for the installation. The manual asks that firewall
be turned off at installation, but I find that drastic.
I guess I should have cut off my internet connection when
I did this.
(b) I installed my printer drivers and print server back-to-back
without rebooting the computer in between. The manual
allows for this but I was not able to avoid the "the
segment of the print server is different from your
computer" error no matter what I tried. So I rebooted
and started the print server install a second time over.
Worked fine. The manual's guidance for this error was
incorrect in my case.
So, if what I've learned applies:
(i) install the printer driver as a normal USB
printer on your computers first.
(ii) reboot the computers
(iii) install the print server software.

Did this for all computers on the network, and
now I can print from anywhere (note that I did not
reconfigure the print server hardware each time, only
on the 1st computer, but I don't see the harm if one
does it for each computer as long as one is consistent
in placing the same settings each time).
(c) The installation of the print server software caused
my printer settings to go from "Use Printer Online"
to "Use Printer Offline". My printer swallowed all
my jobs because of that and no pages were coming out.
To remediate this go to the "Control Panel", "Printers",
"Viewed my installed printers",
right click the printer and select "Use Printer Online".
Did this for all computers.
Everything worked after that, with all firewalls reenabled.
Some day in the future, the network will go down
(power outage or other), and DHCP router might
assign a different dynamic IP address for the print server.
If that is the case, I'll have to point my computers to the
new IP address. To findout what your computer thinks the
printer address is: "Control Panel", "Printers",
"View installed printers", right click the printer and
select "Properties". Select the "Ports" tab,
then "Configure Port". Then compare the IP against the
new address your router gave to the print server
(go to your router's web page to find out). If they don't
match then you'll need to reconfigure. That said, I tested
a new IP address on the print server by power cycling it.
I then rebooted the computers and found that the new print
server address had been matched automatically on my
PCs. So things can fix themselves even if the network goes
down (the name of the port was still had the old address,
but the actual address it used was the new one...)
I've not tried this with IPP printing (remote location
printing, not did I test it under Linux or Mac).
The print server's web access is rather primitive.
But it has all I need. I intend to use this with Linux too.
The device worked as advertised and I am satisfied with it.


Click Here to see more reviews about: IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)



Buy NowGet 40% OFF

Click here for more information about IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)

Read More...