Showing posts with label wireless print server. Show all posts
Showing posts with label wireless print server. Show all posts

Wednesday, June 27, 2012

Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT Review

Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT
Average Reviews:

(More customer reviews)
Out of the box this device has clear directions. I did not believe them so I just plugging in the CD and blindly followed the steps to first setting up the print server on the wireless router then setting it up on each computer separately. The trick was to have the computer already using the printer before setting up the print server. The software does all the work and uses the DHCP from the router.
Just a note I did set up the WAP as I have neighbors.
Even with the server hidden behind the printer I get reception a hundred feet away with no problem. I have not tried farther.


Click Here to see more reviews about: Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT



Buy Now

Click here for more information about Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT

Read More...

Tuesday, May 15, 2012

D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port Review

D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port
Average Reviews:

(More customer reviews)
Most people complained about not getting WPA support and hence gave this product low scores. First, the new version already supports WPA. If you've got an old model, you can also download the firmware to upgrade.
I originally bought the linksys print server with the parallel port. That product sucks big time. Never work and when you contact support, they just tell you your printer is not supported besides asking silly questions like did you chose the printer as your default printer.
The D-Link print server works well. Not sure about durability since I just got it today and spent less than 15 min to set it up. Should have ignored the negative reviews and bought this instead of the linksys one. Would have saved a lot of time.

Click Here to see more reviews about: D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port

The D-Link DP-G321 is an 802.11g Wireless Multi-Port Print Server that connects up to two USB printers and one parallel printer to your network. You can share your printers on the network using wireless connectivity or via an Ethernet connection. With support for remote printing, your printers are available online for receiving print jobs from anywhere via the Internet or your local Intranet. Simplify the process of sharing printers on a wireless network with the DP-G321.

Buy Now

Click here for more information about D-Link DP-G321 Wireless-G Print Server USB 2.0/Parallel Port

Read More...

Monday, May 7, 2012

D-Link DPR-1260 RangeBooster G Multifunction Print Server Review

D-Link DPR-1260 RangeBooster G Multifunction Print Server
Average Reviews:

(More customer reviews)
Okay. It isn't perfect. Installation isn't as easy as it should be. Instructions aren't as good as they should be. Some printers work with it, and apparently some don't.
But go look at the ratings on all the other print servers. You'll see the same problems. I tried at least three others, and couldn't get any of them to work. I've been able to successfully get this print server to work with an Epson R300 (USB 1.1), a Canon MP830 all-in-one(USB 2, print only), and even a Lexmark Optra T610 laser printer(parallel, with a USB-to-parallel adapter from Belkin).
Printer manufacturers have gone nuts with bi-directional information going back and forth between the printer and the computer. The result: really pretty printer drivers that give you loads of information and options, but depend on the printer being physically connected to the computer. But when you want to easily share that printer with a bunch of other people (especially a bunch of people with laptops), it's much more difficult. Either everybody has to swap cables, or you buy a print server--and give up the pretty driver screens that pop up to tell you to buy more ink.
The D-Link DPR-1260 is the only one I could find that actually listed compatible printers on the box. They say that they tested with 100 different printers. I believe it. Their competitors don't seem to have done nearly as much testing.
If you aren't comfortable setting up a wireless router on your own, or if you needed help installing your printer the first time, don't buy this. If you can figure out what the d-link is doing by setting ports on your printers to print to an IP address, give it a try.
If the market had some better entries, I probably wouldn't rate this with 5 stars. But it appears to me to be the cream of the crop.
Update (12/2007): We've had it for about a year, and we've had trouble a number of times. It repeatedly loses settings. If I could reduce the number of stars, I'd give it two or three.


Click Here to see more reviews about: D-Link DPR-1260 RangeBooster G Multifunction Print Server



Buy NowGet 61% OFF

Click here for more information about D-Link DPR-1260 RangeBooster G Multifunction Print Server

Read More...

Saturday, April 21, 2012

Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support Review

Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support
Average Reviews:

(More customer reviews)
Once you get this gizmo going, it works nicely. You can connect multiple computers on your home network to a printer that's within WiFi range. But setting it up is a challenge, because you have to do exactly the right things in exactly the right sequence, and some of the things you have to do right aren't mentioned in the setup wizard that runs when you insert the Linksys setup CD into your computer, or they're mentioned so late in the process that you may have to start all over again!
The process takes about 90 minutes if you do everything right the first time around and don't have to double back. Most of the time you're watching software load - it's as exciting as watching paint dry. Here's what you have to do, as far as I'm able to recount from having just done it for a friend's home network. If you think the following is written in Greek or maybe in Geek, get someone else to do this for you. If you're up to the challenge, this review may save you time and frustration and prevent more 1-star reviews.
(1) Before you set the print server up, it's a good idea to go to the web site of the company that makes your router (Linksys, D-Link, Netgear, etc.) and download and install the latest "firmware" for your router. That takes maybe 15 minutes.
(2) Move the printer close to the PC that's connected to your wireless router. It has to be close enough to the router for you to connect it via a standard Ethernet ("patch" or "Internet") cable. It's not a big deal, but it means you may have to set the printer up in one place and then move it back to where you want it to be. (Linksys supplies the necessary cables in the box, which is to their credit. Most printer manufacturers make you buy your own cable.)
(3) The printer needs to be set up on the computer using a wired (USB) connection *before* you try to set up the wireless connection. If you're just going wireless with a printer you've already installed on the PC that's connected to your WiFi router, you're all set. But if you're installing a new printer, or trying to go wireless with a printer you've moved from some other computer, be sure to install it as a USB printer first. (3-a) Once you have the printer set up as a wireless "network" computer, you may want to uninstall the USB version of the same printer, because when you boot up, some versions of Windows will give you endless warnings that the local printer isn't connected. (3-b) This also means that if you ever buy a new printer and you want to connect it wirelessly via the Linksys print server, you have to install it first as a (wired) USB printer, and then re-run the "Set Up Computer" wizard from the CD that comes with the Linksys. Don't lose that CD!
(4) The setup wizard asks for a password for the print server. You can use any password you like, BUT then it asks for a passphrase, and the wizard fails to point out that you need the exact WEP passphrase or WEP key you've (already) used to set up your wireless router. (You are using WEP or stronger security on your wireless router, right? If not, go find out how to set up WEP security and do it immediately.) (4-a) The setup wizard asks for a passphrase, but if you've used a passcode on your router, there's a way to enter it you look carefully at the screen.
(5) Once you complete setting up the wireless print server, the wizard leads you through setting up your computer. Again, you must have already installed the printer onto the computer via a USB cable before you get to this point! Follow the instructions and by gosh - it works! Then at the very end there's a small note saying that if you want to set up other computers, you have to install the printer drivers first. Nice of Linksys to point that out at the very end; it would have saved me an hour of messing around if they'd said that at the beginning!
(6) Once the printer is set up, it's the default printer, and it wasn't possible (at least for me, with Windows XP) to set a different printer up as the default printer on one of the computers on my home friend's network. A minor irritation, in most cases, and there may be a workaround. If I find it I'll add it to this review.
So: 5 stars for convenience once it's set up; 3 stars for the glitch with the default; 2 stars for poor setup instructions... how do you rate this thing? 4 stars, I guess.


Click Here to see more reviews about: Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support



Buy Now

Click here for more information about Cisco-Linksys Wireless-G Print Server with Multifunction Printer Support

Read More...

Saturday, March 17, 2012

Cisco-Linksys WPS54G Wireless-G 802.11g Print Server Review

Cisco-Linksys WPS54G Wireless-G 802.11g Print Server
Average Reviews:

(More customer reviews)
Cisco may be engaging in unlawful and deceptive trade practices by stating that this print server will work with "most" type 1 & 2 USB printers. What does "most" mean?
I spent 6.5 hours on the phone with Linksys techs trying to get connected to my Canon i850s. Nothing on the web site, disc manual or box listing printers it would not work with--a clear failure to inform when they have to know it won't.
One of the questions the techs ask is whether you are running a multifunction printer. (I wasn't.)Apparently this print server does not work with many multifunction printers, but Linksys and Cisco do not state that anywhere that I could find. (After I buy the thing is not the time to find out I got the wrong product.)
Finally a senior tech came online and said the print server would not work with my printer. I asked him for a list of printers that it would work with and he listed a few, but he said they were not allowed to put the list up on the web site.
Whoah! So that's why I spend 6.5 hours to find out your product does not work. [...]
Others, save yourself the headache, buy someone else's product.

Click Here to see more reviews about: Cisco-Linksys WPS54G Wireless-G 802.11g Print Server



Buy Now

Click here for more information about Cisco-Linksys WPS54G Wireless-G 802.11g Print Server

Read More...

Sunday, February 26, 2012

Linksys WPSM54G Wireless-G USB Print Server Review

Linksys WPSM54G Wireless-G USB Print Server
Average Reviews:

(More customer reviews)
You might like to read this review if you're planning on installing Windows Vista or Windows 7.
I bought the refurbished version of this router. As far as I can tell, it's exactly the same except that it has the most current firmware pre-installed.
I used the Linksys CD to install it, and following the Step 1 instructions I managed to configure the Print Server very easily.
However, when I then proceeded to the next stage (Configuring your computer to see the wireless router via your wireless home network), the CD just pooped out, saying it wouldn't work with my operating system. No 'sorry', no help, just a dead end.
Fortunately, I found a website where it gives you the instructions, and within five minutes it was working perfectly. I'm going to try to include a link, but in case it doesn't work, type into google ehow WPSM54G and hopefully the first link will be How to set up a Linksys WPSM54G or PSUS4 print server under Windows XP, Vista, Vista 64, Windows 7, or Linux. Here's the link - [...]
Follow the instructions for Step 2 and you should be golden!

Click Here to see more reviews about: Linksys WPSM54G Wireless-G USB Print Server



Buy Now

Click here for more information about Linksys WPSM54G Wireless-G USB Print Server

Read More...

Friday, February 24, 2012

Airlink101 AMPS240W Wireless Multi-Functional Print Server Review

Airlink101 AMPS240W Wireless Multi-Functional Print Server
Average Reviews:

(More customer reviews)
Must use static ip address for it to work with any OS. Then set the wireless connection.
You also have to download your specific printer driver onto the computer that is going to
use the printer. Add a network printer on the computer, it will show if you setup the wireless correctly.
Once priner show up, choose a manual connection by supplying the static ip set. Print test page and you are good to go.

Click Here to see more reviews about: Airlink101 AMPS240W Wireless Multi-Functional Print Server



Buy Now

Click here for more information about Airlink101 AMPS240W Wireless Multi-Functional Print Server

Read More...

Monday, December 26, 2011

Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0 Review

Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0
Average Reviews:

(More customer reviews)
After reading the mixed reviews for this, I still decided to try the Linksys Wireless Print Server. Although this is more expensive than the wired print server, I thought that it may be nice to locate my printers (one is USB and the other is parallel/USB) and wireless router in different locations. Neither printer is multi-function. I first tried a "wired" Linksys print server, but was unable to connect (2) USB printers using a hub - plus the price of the print server and the hub was nearly the same as the wireless device.
So far so good, but there are some things that I suggest you do when installing this device. These are based on personal experience, which has been a process of educated trial and error. An IT professional may do things differently, but if you were an IT professional, you probably wouldn't be reading these reviews. My network is almost entirely Linksys components (wireless router, wireless adapter, and print server), although I am using the network cards that were pre-installed with those computers that are hard wired to the router.
First, disable your firewall. This will allow you to test the compatibility of the printers, the network, and the print sever without the extra component to worry about. Once everything is up and running, you can enable your firewall and tweak any networking restrictions at that time.
Secondly, when configuring the router (which is the first step), you will need to have this "wired" to your router. This is part of the instructions, and should not come as a surprise. However, make sure you leave this "wired" until you have installed the print server drivers and software on all your networked computers. The install utility seems to have trouble finding the print server if you have disconnected the hard wire connection, even if the print server lights indicate it is already on the wireless LAN.
Thirdly, if you are using MAC address filtering, temporarily disable this. One you get the print server set up and running, you can find its MAC address using the web utility or the BI-admin utility, and then restore the filtering after adding the print server. However, if you want to use the web based configuration utility (like you use with your router), please follow the instructions in the following paragraph.
Fourth, once you have installed everything per the instructions, I recommend the following: give your print server a fixed IP address on your network (e.g. 192.168.1.171). My experience is this: If your router uses DHCP to assign IP addresses to your networked computers and servers, the print server does not always communicate back to the router, and your print server will sometimes "disappear" from your network after computers have been turned off and on. Something to do with the order the computers and servers are turned on. Setting this to a fixed address has cleared up those problems for me. Also, because the print server's address is fixed, you can access the web based configuration utility by typing in the same IP address each time.
Fifthly, find the MAC address using the web based or BI-admin utility. Now, if you are using these, reinstate your MAC address filtering, adding your print server's address to the allowed list.
Sixth, test and test again. Reboot your computers and unplug and re-plug your print server. Send documents to all your printers from all your computers - not just printer test pages. Print actual documents from a "Wordpad" or similar program.
Seventh, enable your firewall, remembering to enable access to your print server at the fixed IP address used above.
Eighth, test again just to make sure. If it doesn't work now, you know it's the network settings of your firewall.
This has seemed to work for me.


Click Here to see more reviews about: Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0

The Linksys Wireless-G PrintServer for USB 2.0 lets you connect a USB or parallel printer (or both!) directly to your network, eliminating the need to dedicate a PC to print sharing chores.Using a PrintServer frees up your "print share PC" so you don't have to leave it on all the time.It also removes the printing bottleneck, and sets your PC free to do more useful work.Connect the PrintServer directly to your network by 10/100 Ethernet cable, or wirelessly over 54Mbps Wireless-G (802.11g).The wireless option lets you put your printers wherever you want to, without having to run cables.Whichever way the PrintServer is attached to your network, both your wireless and wired PCs will have access to it, and the printers it's connected to.And if you don't use wireless for general networking in your office, you can still use the Wireless-G connection in ad-hoc mode to print from visiting Wireless-G and Wireless-B PCs.The USB port is compatible with USB 1.1 printers, as well as printers that support the new high-speed USB 2.0 specification for even faster throughput.There's also a separate port for a standard parallel printer.For even more versatility, you can connect two printers, one to each port, and send your documents to whichever one is most appropriate for each print job.A user-friendly Setup Wizard makes installation easy, the compact case fits anywhere, and the three megabyte print buffer size handles even large graphics-intensive print jobs.Let the Linksys Wireless-G PrintServer for USB 2.0 bring efficiency to your printing tasks.

Buy NowGet 20% OFF

Click here for more information about Cisco-Linksys WPS54GU2 Wireless-G Print Server for USB 2.0

Read More...

Friday, December 9, 2011

Linksys Wireless-G PrintServer WPS54G - Print server - Hi-Speed USB - Ethernet, Fast Ethernet, 802.11b, 802.11g - 10Base-T, 100Base-TX Review

Linksys Wireless-G PrintServer WPS54G - Print server - Hi-Speed USB - Ethernet, Fast Ethernet, 802.11b, 802.11g - 10Base-T, 100Base-TX
Average Reviews:

(More customer reviews)
I am fairly tech-savvy, and could never get the wireless on this device working properly. It wasn't a big issue for me as I just have the printer up by the router, but it was disappointing to see that I didn't have any options.
Whenever the power is cut to the device, it loses all memory. The firmware doesn't keep the IP address settings (if it isn't set up for DHCP, which incidently I couldn't get working properly either), so every time it is unplugged or there is a surge of any significance, you will have to plug this into your system and reconfigure it WHILE BEING VERY CAREFUL NOT TO UNPLUG IT.
Complaints aside, what did work worked very well. It was able to print correctly to all USB printers I had hooked up to it -- even through a USB->parallel adapter.
If I hadn't a clue what I was doing, I never would have gotten this working - even with the PDF manual I found online. If you are a technical novice, this is probably not the printserver for you.

Click Here to see more reviews about: Linksys Wireless-G PrintServer WPS54G - Print server - Hi-Speed USB - Ethernet, Fast Ethernet, 802.11b, 802.11g - 10Base-T, 100Base-TX



Buy Now

Click here for more information about Linksys Wireless-G PrintServer WPS54G - Print server - Hi-Speed USB - Ethernet, Fast Ethernet, 802.11b, 802.11g - 10Base-T, 100Base-TX

Read More...

Monday, October 24, 2011

Belkin F1UP0001 Wireless USB Print Server Review

Belkin F1UP0001 Wireless USB Print Server
Average Reviews:

(More customer reviews)
I spent lots of time with old ethernet/parallel print servers that wouldn't quite work with GDI and other low cost printers.
I was skeptical that this would work.
I was impressed that this print server worked with an easy 5 minute guided setup on my Minolta 1250W GDI printer.
The range of the wireless (Im using B, not G) is fine (covers whole floor of large home).
This device is an excellent solution for putting 2 USB printers anywhere you want them without dealing with the 16ft limitation of USB, or having to run any ethernet or parallel wires.
(I don't have to cut and run any wires in my new home). Plus
you get added bonus of having a normal cheap ($100~) printer
become a networked printer for all to share. (and you don't
have to have the original host computer on to print, as you
would with USB.)

Click Here to see more reviews about: Belkin F1UP0001 Wireless USB Print Server

The Belkin 802.11g Wireless Print Server lets you easily add two USB printers to your wireless, or wired network. It features 802.11g technology that makes sending print jobs faster than ever, and includes a memory buffer that handles your graphics jobs effortlessly.The Print Server is so easy to install, youll be printing in minutes. Simply load your printer drivers on each computer, run the Belkin Easy Installation CD, attach your USB printer to the Belkin 802.11g Wireless Print Server and you are now free to print wireless from around the home or office. It is also compatible with wired networks through its integrated Ethernet Port.Compatible with most USB, network-ready printers, and major operating systems, your 802.11g Wireless Print Server from Belkin delivers even your most data-intensive print jobs with maximum speed and reliability.

Buy Now

Click here for more information about Belkin F1UP0001 Wireless USB Print Server

Read More...

Sunday, October 16, 2011

TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue) Review

TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue)
Average Reviews:

(More customer reviews)
I converted my LaserJet 5MP (what a workhorse!) to wireless with this unit. It communicates well with the Ubuntu and Windows Vista laptops in the house. Wireless printing is much more convenient than print sharing since you don't have to turn on an extra machine to act as a server.
The documentation could be better and you need a Windows computer (or WINE) to get this running because the web interface doesn't work out of the box. But it's been running fine for weeks now that I've installed it.
I haven't had a problem with signal strength at all and my printer is upstairs while my computer is often downstairs.
I would recommend this adapter with the caveat that it's easy to set up if you know the basics of home networks. From the other reviews and comments, I'd say that if you don't know what an IP address is or how to install a networked printer on your OS, you might want to look elsewhere for something simpler to install.

Click Here to see more reviews about: TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue)



Buy NowGet 19% OFF

Click here for more information about TRENDnet Wireless 1-Port Parallel Print Server TEW-P1PG (Blue)

Read More...

Wednesday, September 21, 2011

NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch Review

NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch
Average Reviews:

(More customer reviews)
I have a wirelss network w/3 pc's, one Mac Powerbook, w/netgear router, and now the WGPS606 netgear printserver (my motorola WPS870G was half the $$$ and easier to set up on my Powerbook, but got killed by lightning storm yesterday); I have an old laserjet & HP officejet d145. Contrary to rumors, you can get the WPS870G to printserve wirelessly from Mac/OSX through the network (i.e., powerbook is wireless, printserver is also wireless)
1-I set a dedicated IP address in my router to associate w/my printserver...To do this: in 192.168.0.1 (which is the router) I renewed IP addresses, looked into the router's assignment table, and figured out that the printserver was at 192.168.0.4, so I just assigned it to 192.168.0.4; to do the assignment, you also need the device (i.e., the printserver's) MAC address; that's the trick...the MAC address on the netgear printserver is called the "device" or "hardware" MAC address, and it's the number printed on the box itself; if you go to the printserver ip address (in my case, 192.168.0.4), you find netgear's set up pages for the printserver; the printserver has two mac addresses, the 2nd is called something like the `wireless' MACaddress; that wireless MAC address (which is only different by one digit at the end) is what you use when you set up a dedicated IP address for the print server; when you've done all this, you should probably go back into 192.168.0.1 (your router set up pages) try to renew ip addresses to see if the assigned printserver address (in my case, 192.168.0.4) shows up and shows up with the right MAC address
3- when setting up a new printer in printer set up utility, you select IP Printing + LPD/LPR, printer address is your new ip address that you assigned (192.168.0.4 in my case) and queue name is L1 (presumably L2 if you have a second printer)
btw, you may need to upgrade the driver (I needed an HPIJS driver for my multi-function HP d145); the original driver didn't even install from the cd


Click Here to see more reviews about: NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch

With the NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch, users on your network have the freedom to print wirelessly to up to two printers. It also functions as a wireless Ethernet bridge, allowing you to extend your wireless connection and connect up to four users to your wireless network.
Wireless Printing and Bridge The WGPS606 has two USB ports to connect two printers. Simply put your printers wherever works best and plug them into the wireless print server; a Smart Wizard will guide you through configuration in just seconds. Once configured, anyone on the network can print to either printer; business documents can be sent to the high-end laser and photos can be printed on the photo printer. No separate adapters are needed. The print server can print via Peer-to-Peer (PTP) and Windows LPD printing methods.
The print server also functions as a wireless Ethernet bridge, allowing you to connect a cluster of up to four PCs and laptops without dedicated wireless adapters.
Secure and Compatible Powerful 40/64-bit and 128-bit WEP encryption and WPA-PSK keep your wireless network secure. The device is interoperable with 802.11b, 802.11g, and RangeMax (MIMO-G) networks, so you can be sure it will work with your existing wireless network.
The NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch is backed by a 1-year warranty.
What's in the Box WGPS606 54 Mbps Wireless Print Server w/4-port Switch, power adapter, 2 USB cables, resource CD, installation guide, warranty/support information card.

Buy Now

Click here for more information about NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch

Read More...

Sunday, September 11, 2011

HP Wireless G Print Server Review

HP Wireless G Print Server
Average Reviews:

(More customer reviews)
The HP Wireless G Print Server is the one to get if you already have a wireless network and an HP printer. It comes with everything you need to set up the server (cable, directions, driver/software CD) . The "HP Wireless printing Upgrade kit" is really for those you do not have a wireless network and only one computer. The Upgrade Kit requires the computer on which it is installed to be on to use the printer on any other computer. The HP Wireless G Print Server will allow you to print from any computer on your network, not requiring any particular computer to be on.
If you have more than one computer but don't have a wireless network, the best setup is to get a wireless router and set up the wireless network (it is easy nowadays.) This way you can print from any computer using the HP Wireless G Print Server without turning on a "host" computer.
I have been using the HP Wireless G Print Server for a month now and it works faultlessly. I did have an issue with my HP D5460 printer sending back the ink levels. I uninstalled the print server and then reinstalled it and it works fine now. The directions were unclear on the order of installation of a printer and the print server. Here is the best way to install:
First install the printer on each computer.
Disconnect the printer from all computers.
Install the print server on each computer, following the installation instructions for connecting the printer to the server.

Click Here to see more reviews about: HP Wireless G Print Server



Buy Now

Click here for more information about HP Wireless G Print Server

Read More...

Friday, August 26, 2011

Belkin F8T030 Bluetooth Access Point with USB Print Server Review

Belkin F8T030 Bluetooth Access Point with USB Print Server
Average Reviews:

(More customer reviews)
The tech support was prompt and knowledgeable. The unit has good range which seems to be limitied more by the class of the PDA that is trying to acess it.
HOWEVER this product has a VERY serious design deficiency that makes it UNSUITABLE FOR USE at any price!!!! Belkin tech support has confirmed that there is no way to reset the unit to the original factory settings if you can not acess it via the built in web manager. Belkin tech support also confirmed that there is also a flaw in the unit that will cause some user passwords to not be accepted. Once this happens, this will essentially require returning the unit for complete replacement. I know of no other networking product that has such a serious design flaw (all other networking devices I am aware of have at least a reset button somewhere or a "power on" sequence to handle these inevitable situations). It also makes the unit unusable for any scenario where if you make a change to the settings, you can not afford to be without it for the time to swap it out.
An obvious problem for you, me and Amazon here!

Click Here to see more reviews about: Belkin F8T030 Bluetooth Access Point with USB Print Server

Early Adopters Pick: March 2003 The Belkin F8T030 Bluetooth Access Point allows you to transfer data to other Bluetooth-enabled devices including computers, PDAs and printers as well as to gain Internet access through a connected network.
Offering access to local area networks (LANs) with devices enabled with Bluetooth technology such as Pocket PC PDAs, Palm PDAs, notebooks, desktop PCs, and mobile phones, the Bluetooth Access Point with USB Print Server offers connectivity to the Internet, corporate LAN, and home networks. It also enables any USB printer to be accessed via a Bluetooth connection when connected through the Access Point's USB print server ports. At the same time, the product functions as a USB print server where the printer can be visible to the entire wired LAN, which allows the connected USB printer to be accessed by any client on the wired LAN. Up to seven users can simultaneously share the Internet, the LAN, or print to a USB printer via a Bluetooth connection. It features two USB type A connectors, an RJ45 Ethernet port, and the front has seven multicolored LEDs that depict connection activity quickly and easily.
The Access Point requires no manual configuration. It can be installed and start running in under two minutes, needing only a power source and an Ethernet connection, according to the manufacturer. The IP is obtained automatically via DHCP upon power-up or can be set by any Bluetooth client.

Buy Now

Click here for more information about Belkin F8T030 Bluetooth Access Point with USB Print Server

Read More...