Showing posts with label lan. Show all posts
Showing posts with label lan. Show all posts

Tuesday, July 17, 2012

Cisco-Linksys EZXS88W EtherFast 10/100 8-Port Workgroup Switch Review

Cisco-Linksys  EZXS88W EtherFast 10/100 8-Port Workgroup Switch
Average Reviews:

(More customer reviews)
This is a great little box for connecting a small network without breaking your bank.
The EZXS88W has a great work/size ratio. It's small enough to set on top of a computer case and provides eight ports of full duplex, 10/100 networking.
It has a very informative display to give out info for connection speed, duplex connection and collision. The setup is as simple as plugging in the power and network cables. I have yet to run into any problems with this unit and would recommend it without a second thought.

Click Here to see more reviews about: Cisco-Linksys EZXS88W EtherFast 10/100 8-Port Workgroup Switch

The EtherFast 8-Port 10/100 Workgroup Switch is a quick and easy way to boost your network's performance while migrating to the power of Fast Ethernet. With support for half- and full-duplex speeds, the switch allows your network to run at 10 Mbps, 20 Mbps, 100 Mbps and an incredible 200 Mbps.
The 8-Port Workgroup Switch is designed to meet the needs of small-business and home networks. The eight-port rack-mountable switch is great for enterprise and medium-size business use.

Buy NowGet 34% OFF

Click here for more information about Cisco-Linksys EZXS88W EtherFast 10/100 8-Port Workgroup Switch

Read More...

Sunday, June 17, 2012

Duolinks SW24 2PORT Dual Wan Load Balancing Router Review

Duolinks SW24 2PORT Dual Wan Load Balancing Router
Average Reviews:

(More customer reviews)
It's hard to find a load balancing router for a smaller business that is simple and easy to integrate into the network, provides security and the necessary backup connectivity that is beneficial to a business without breaking the bank. Recently, we purchased the Duolinks SW24 2PORT Dual Wan Load Balancing Router for less than $140. It was promptly delivered and easy to setup right out of the box. We didn't have to call in a "pro" to integrate the unit into our network. Basically, over 95% of the work our business processes require internet connectivity through portals and websites. We need a solid router that provides security as well as uninterrupted internet connectivity. This router does the job. We're using it with cable and DSL. The unit easily balances our traffic across these connections. During the few months it has been in service, at least one of the connections has had trouble or failed but with the router in place, it was a seamless blip that did not impact our business. The unit "failed over" to the active connection without interrupting the network. The router is easily configured through a browser interface and has many different functions we are still learning and utilizing. It provides a good firewall for security as well as the ability to block inappropriate traffic. We're extremely happy with our choice and look forward to learning more about the router and its capabilities. All this makes it extremely affordable for the home or small to medium business that doesn't need the complicated Cisco routers and the highly paid contractors needed to install and maintain them.

Click Here to see more reviews about: Duolinks SW24 2PORT Dual Wan Load Balancing Router



Buy NowGet 10% OFF

Click here for more information about Duolinks SW24 2PORT Dual Wan Load Balancing Router

Read More...

Friday, January 13, 2012

Cisco SD208 8-port 10/100 Switch Review

Cisco SD208 8-port 10/100 Switch
Average Reviews:

(More customer reviews)
I had two of these fail in the last week. Both are about a year old. The first one has a couple of ports that stopped working, and the second completely died overnight. They're plugged into UPS's, so power surges didn't cause the problem. I'm really dissapointed!

Click Here to see more reviews about: Cisco SD208 8-port 10/100 Switch

This newly-redesigned Linksys 8-Port 10/100 Switch can significantly increase your network traffics speed. A switch serves the same function as a hub in a network design -- tying your network equipment together. But unlike a simple-minded hub which divides the networks bandwidth among all the attached devices, a switch delivers full network speeds at each port. Installing this cost-effective 8-Port 10/100 Switch can potentially increase your network speed by eight times. It is the perfect way of integrating 10Mbps Ethernet and 100Mbps Fast Ethernet devices, too. All eight ports are auto speed negotiating, and have automatic MDI/MDI-X crossover detection, so you do not have to worry about the cable type.

Buy NowGet 17% OFF

Click here for more information about Cisco SD208 8-port 10/100 Switch

Read More...

Sunday, October 2, 2011

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver) Review

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)
Average Reviews:

(More customer reviews)
The print server hardware worked fine, but the setup software
caused a few problems as a result of oversimplication.

I was able to get the server going with a Brother HL-5150D USB
printer on a home network with 4 computers (3 wireless, 1
ethernet), an all-in-one networked device and the USB
printer itself. This is using a mixture of computers with
different flavours of Windows XP. The print server is wired to
a router using DHCP. I did not chose to put the print server on
a static address (as the manual prefers) since that does not
reflect my network setup (home networks are usually DHCP).
I encountered problems because:
(a) My software firewall first caused the installer to crash.
I wanted to avoid turning it off entirely, but
to no avail. I was able to leave my router's hardware
firewall on but had to turn off my software firewall
for the installation. The manual asks that firewall
be turned off at installation, but I find that drastic.
I guess I should have cut off my internet connection when
I did this.
(b) I installed my printer drivers and print server back-to-back
without rebooting the computer in between. The manual
allows for this but I was not able to avoid the "the
segment of the print server is different from your
computer" error no matter what I tried. So I rebooted
and started the print server install a second time over.
Worked fine. The manual's guidance for this error was
incorrect in my case.
So, if what I've learned applies:
(i) install the printer driver as a normal USB
printer on your computers first.
(ii) reboot the computers
(iii) install the print server software.

Did this for all computers on the network, and
now I can print from anywhere (note that I did not
reconfigure the print server hardware each time, only
on the 1st computer, but I don't see the harm if one
does it for each computer as long as one is consistent
in placing the same settings each time).
(c) The installation of the print server software caused
my printer settings to go from "Use Printer Online"
to "Use Printer Offline". My printer swallowed all
my jobs because of that and no pages were coming out.
To remediate this go to the "Control Panel", "Printers",
"Viewed my installed printers",
right click the printer and select "Use Printer Online".
Did this for all computers.
Everything worked after that, with all firewalls reenabled.
Some day in the future, the network will go down
(power outage or other), and DHCP router might
assign a different dynamic IP address for the print server.
If that is the case, I'll have to point my computers to the
new IP address. To findout what your computer thinks the
printer address is: "Control Panel", "Printers",
"View installed printers", right click the printer and
select "Properties". Select the "Ports" tab,
then "Configure Port". Then compare the IP against the
new address your router gave to the print server
(go to your router's web page to find out). If they don't
match then you'll need to reconfigure. That said, I tested
a new IP address on the print server by power cycling it.
I then rebooted the computers and found that the new print
server address had been matched automatically on my
PCs. So things can fix themselves even if the network goes
down (the name of the port was still had the old address,
but the actual address it used was the new one...)
I've not tried this with IPP printing (remote location
printing, not did I test it under Linux or Mac).
The print server's web access is rather primitive.
But it has all I need. I intend to use this with Linux too.
The device worked as advertised and I am satisfied with it.


Click Here to see more reviews about: IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)



Buy NowGet 40% OFF

Click here for more information about IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)

Read More...

Tuesday, September 27, 2011

Cisco-Linksys EZXS16W EtherFast 10/100 16-Port Workgroup Switch Review

Cisco-Linksys EZXS16W EtherFast 10/100 16-Port Workgroup Switch
Average Reviews:

(More customer reviews)
After an unfortunate power spike that fried 3 of the 8 ports on my old switch, I felt that as long as I need to replace, I may as well upgrade at the same time.
With the expansion of the wireless market, switches like these are coming down in price. Life is good. If you can accomodate the wiring it's tough to beat the Mbps/cost ratio that wired networking provides.
This switch is just as easy as its little brother. Plug it in, plug in the CAT5 and you are up and running. The LEDs let you know at a glance if there are any collision or speed issues.
This switch provides enough performance to share the DSL connection, play skipless music and video over the network and make the transfer of large files quick and easy.
With 16 ports, I doubt I will be filling out the switch anytime soon and I will probably upgrade to Gigabit networking before then anyways.

Click Here to see more reviews about: Cisco-Linksys EZXS16W EtherFast 10/100 16-Port Workgroup Switch

Migrate your network to Fast Ethernet 100Mbps speed with the EtherFast10/100 Workgroup Switches. These new compact switches from Linksys offer a new compact design that perfect for space-sensitive applications. Apply this switching power to your 10BaseT network, and your data traffic efficiency improves several times over. Connect your file server to the Switchs auto-sensing ports, and speed up access time for all your users in just one move. And when youre ready, switch your way to full duplex speeds of up to 200Mbpshe speed is yours. And that not all Every Switch includes a complete suite of advanced data error detection and correction features for surefire communication every time. Auto partitioning, data-collision control, signal regeneration, and incoming frame retiming ensure that not a single bit of data is lost, even during heavy network traffic.

Buy NowGet 24% OFF

Click here for more information about Cisco-Linksys EZXS16W EtherFast 10/100 16-Port Workgroup Switch

Read More...

Tuesday, August 23, 2011

NETGEAR FS116 16 Port Fast Ethernet Switch with Auto Uplink (10/100) Review

NETGEAR FS116 16 Port Fast Ethernet Switch with Auto Uplink (10/100)
Average Reviews:

(More customer reviews)
I had been looking at the FS116 for some time, hoping for the prices to come down. Recently, I was able to get one at a good price from Amazon so I jumped on it.
This switch, unlike many of the Linksys products, is made of *metal*. It is VERY solidly built and quite small - not much taller than the network jacks themselves. It does not have any fans and runs only slightly warm to the touch.
... EVERY port on this device is now uplink capable, not just one port "with a button" as the heading indicates. For me, this was a pleasant surprise as I have several ethernet cables that are designed for uplinking and with this switch, I can use them whenever I need to due to the auto-detection on all 16 ports.
I really like that the LEDs and cables come-out of the front. The trend in consumer level devices is to put the cables on the rear. This does not work for me as I have my "network center" in the basement and all of the cables approach from the front (note, front-connect is how professional-level equipment is built and the fact that the Netgear uses that also harkens to their power-user-level equipment).
Anyway, I have been using this switch transparently for a couple of months now. It functions just as a switch should: without a thought. It just works.
Mike

Click Here to see more reviews about: NETGEAR FS116 16 Port Fast Ethernet Switch with Auto Uplink (10/100)



Buy NowGet 23% OFF

Click here for more information about NETGEAR FS116 16 Port Fast Ethernet Switch with Auto Uplink (10/100)

Read More...