Showing posts with label iogear. Show all posts
Showing posts with label iogear. Show all posts

Monday, August 6, 2012

IOGEAR Wireless-G High Speed USB 2.0 Adapter GWU523 Review

IOGEAR Wireless-G High Speed USB 2.0 Adapter GWU523
Average Reviews:

(More customer reviews)
I have had the USB wireless adapter from Iogear for 2 months now and have had no problems. My Windows XP based Dell PC recognized the adapter quickly and started working immediately. The PC with the adapter is in a room that is about 50 feet from our router (with 2 walls between)and it has had no problems receiving a very strong signal.
One note for new users. The adapter has software for wireless networks that must be used to find and control links to wireless networks. The Windows XP wireless network utility can not be used with this adapter (or at least I have not found a way to use the Windows XP utility). However, the utility supplied with the adapter works fine.

Click Here to see more reviews about: IOGEAR Wireless-G High Speed USB 2.0 Adapter GWU523



Buy NowGet 44% OFF

Click here for more information about IOGEAR Wireless-G High Speed USB 2.0 Adapter GWU523

Read More...

Wednesday, June 27, 2012

Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT Review

Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT
Average Reviews:

(More customer reviews)
Out of the box this device has clear directions. I did not believe them so I just plugging in the CD and blindly followed the steps to first setting up the print server on the wireless router then setting it up on each computer separately. The trick was to have the computer already using the printer before setting up the print server. The software does all the work and uses the DHCP from the router.
Just a note I did set up the WAP as I have neighbors.
Even with the server hidden behind the printer I get reception a hundred feet away with no problem. I have not tried farther.


Click Here to see more reviews about: Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT



Buy Now

Click here for more information about Linksys WPSM54G CISCO - LINKSYS WRLS G PRINT SVR MULTIFUNCTION PRINTER SUPPORT

Read More...

Sunday, October 2, 2011

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver) Review

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)
Average Reviews:

(More customer reviews)
The print server hardware worked fine, but the setup software
caused a few problems as a result of oversimplication.

I was able to get the server going with a Brother HL-5150D USB
printer on a home network with 4 computers (3 wireless, 1
ethernet), an all-in-one networked device and the USB
printer itself. This is using a mixture of computers with
different flavours of Windows XP. The print server is wired to
a router using DHCP. I did not chose to put the print server on
a static address (as the manual prefers) since that does not
reflect my network setup (home networks are usually DHCP).
I encountered problems because:
(a) My software firewall first caused the installer to crash.
I wanted to avoid turning it off entirely, but
to no avail. I was able to leave my router's hardware
firewall on but had to turn off my software firewall
for the installation. The manual asks that firewall
be turned off at installation, but I find that drastic.
I guess I should have cut off my internet connection when
I did this.
(b) I installed my printer drivers and print server back-to-back
without rebooting the computer in between. The manual
allows for this but I was not able to avoid the "the
segment of the print server is different from your
computer" error no matter what I tried. So I rebooted
and started the print server install a second time over.
Worked fine. The manual's guidance for this error was
incorrect in my case.
So, if what I've learned applies:
(i) install the printer driver as a normal USB
printer on your computers first.
(ii) reboot the computers
(iii) install the print server software.

Did this for all computers on the network, and
now I can print from anywhere (note that I did not
reconfigure the print server hardware each time, only
on the 1st computer, but I don't see the harm if one
does it for each computer as long as one is consistent
in placing the same settings each time).
(c) The installation of the print server software caused
my printer settings to go from "Use Printer Online"
to "Use Printer Offline". My printer swallowed all
my jobs because of that and no pages were coming out.
To remediate this go to the "Control Panel", "Printers",
"Viewed my installed printers",
right click the printer and select "Use Printer Online".
Did this for all computers.
Everything worked after that, with all firewalls reenabled.
Some day in the future, the network will go down
(power outage or other), and DHCP router might
assign a different dynamic IP address for the print server.
If that is the case, I'll have to point my computers to the
new IP address. To findout what your computer thinks the
printer address is: "Control Panel", "Printers",
"View installed printers", right click the printer and
select "Properties". Select the "Ports" tab,
then "Configure Port". Then compare the IP against the
new address your router gave to the print server
(go to your router's web page to find out). If they don't
match then you'll need to reconfigure. That said, I tested
a new IP address on the print server by power cycling it.
I then rebooted the computers and found that the new print
server address had been matched automatically on my
PCs. So things can fix themselves even if the network goes
down (the name of the port was still had the old address,
but the actual address it used was the new one...)
I've not tried this with IPP printing (remote location
printing, not did I test it under Linux or Mac).
The print server's web access is rather primitive.
But it has all I need. I intend to use this with Linux too.
The device worked as advertised and I am satisfied with it.


Click Here to see more reviews about: IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)



Buy NowGet 40% OFF

Click here for more information about IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)

Read More...

Friday, August 26, 2011

Belkin F8T030 Bluetooth Access Point with USB Print Server Review

Belkin F8T030 Bluetooth Access Point with USB Print Server
Average Reviews:

(More customer reviews)
The tech support was prompt and knowledgeable. The unit has good range which seems to be limitied more by the class of the PDA that is trying to acess it.
HOWEVER this product has a VERY serious design deficiency that makes it UNSUITABLE FOR USE at any price!!!! Belkin tech support has confirmed that there is no way to reset the unit to the original factory settings if you can not acess it via the built in web manager. Belkin tech support also confirmed that there is also a flaw in the unit that will cause some user passwords to not be accepted. Once this happens, this will essentially require returning the unit for complete replacement. I know of no other networking product that has such a serious design flaw (all other networking devices I am aware of have at least a reset button somewhere or a "power on" sequence to handle these inevitable situations). It also makes the unit unusable for any scenario where if you make a change to the settings, you can not afford to be without it for the time to swap it out.
An obvious problem for you, me and Amazon here!

Click Here to see more reviews about: Belkin F8T030 Bluetooth Access Point with USB Print Server

Early Adopters Pick: March 2003 The Belkin F8T030 Bluetooth Access Point allows you to transfer data to other Bluetooth-enabled devices including computers, PDAs and printers as well as to gain Internet access through a connected network.
Offering access to local area networks (LANs) with devices enabled with Bluetooth technology such as Pocket PC PDAs, Palm PDAs, notebooks, desktop PCs, and mobile phones, the Bluetooth Access Point with USB Print Server offers connectivity to the Internet, corporate LAN, and home networks. It also enables any USB printer to be accessed via a Bluetooth connection when connected through the Access Point's USB print server ports. At the same time, the product functions as a USB print server where the printer can be visible to the entire wired LAN, which allows the connected USB printer to be accessed by any client on the wired LAN. Up to seven users can simultaneously share the Internet, the LAN, or print to a USB printer via a Bluetooth connection. It features two USB type A connectors, an RJ45 Ethernet port, and the front has seven multicolored LEDs that depict connection activity quickly and easily.
The Access Point requires no manual configuration. It can be installed and start running in under two minutes, needing only a power source and an Ethernet connection, according to the manufacturer. The IP is obtained automatically via DHCP upon power-up or can be set by any Bluetooth client.

Buy Now

Click here for more information about Belkin F8T030 Bluetooth Access Point with USB Print Server

Read More...