Showing posts with label macintosh. Show all posts
Showing posts with label macintosh. Show all posts

Monday, July 16, 2012

Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port Review

Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port
Average Reviews:

(More customer reviews)
Got this primarily so we could work anywhere in the house on our PC laptops. Granted, a Linksys wireless router would have been cheaper, but the Airport Extreme also serves as a wireless print server and that (plus the fact that our primary computer is a Mac) was what sealed the deal for us. Our cabling setup is:
Cable modem -> Linksys Wired 4-Port Router -> Airport Extreme -> Lexmark Optra E312L
Our laptops use Linksys Wireless-G cards and get good reception throughout the house. Our G4 and PS2 are hooked directly into the wired Linksys Router for their connectivity. The trick to using it with an existing router is to turn off the NAT addressing feature of the Airport Extreme so that it acts only as an Ethernet "bridge" to the wireless computers; the Linksys router assigns all the IP addresses for everything on the system including the PC laptops. The PCs can print wirelessly to the laser printer via the Airport and so can the Mac. Bonus!
Setup was very quick - about 15 minutes to get everything plugged in. The hard part was getting the security set up correctly (and yes, you'd better secure your wireless network) as the format for passwords was different on the Mac vs. PC platforms. Had to do some Web searches to find out how to make them speak the same language (hex). Has worked flawlessly since then. If I had to do it over, would buy it again in a heartbeat.

Click Here to see more reviews about: Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port

The AirPort Extreme Base Station with Modem and Antenna Port is compatible with the industry-standard 802.11b wireless networking protocol, which means all AirPort products, as well as Wi-Fi certified 802.11b wireless products. For higher performance you will need to have both the Airport Extreme Card and the AirPort Extreme Base Station. The range of AirPort Extreme is up to 50 feet at 54 Mbps and up to 150 feet at 11 Mbps. The Base Station can be used in conjunction with an Ethernet connection (such as with a cable modem, DSL modem, or Ethernet network) through the integrated Ethernet port, or with a telephone line through a modem.
The AirPort Extreme Base Station with Modem and Antenna Port also supports USB or Ethernet wireless printer sharing. Just plug in a compatible USB or Ethernet printer and with Mac OS X on your computer you can quickly and easily print. You can use the new USB port to attach a USB printer or use the 10/100BASE-T Ethernet LAN port to plug in an Ethernet printer directly into the base station.
With the new AirPort Extreme Base Station with Modem and Antenna Port, up to 50 users can work and play on the Internet simultaneously up to 150 feet away from an Ethernet connection or a phone line. The Base Station comes equipped with a built-in firewall to protect sensitive data on your computer and the ability to secure transmissions with support for 128-bit encryption.
The AirPort Extreme Base Station with Modem and Antenna Port lets you manage the range of your wireless network. An external antenna port is provided for you to attach an external antenna. There are two types of antennas available: an omni-directional and a directional, which extend the range of the AirPort Extreme base station. There is also a software feature that allows you on reduce the size of your wireless network, down to just a single room for extra privacy.

Buy Now

Click here for more information about Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port

Read More...

Saturday, February 4, 2012

Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch Review

Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch
Average Reviews:

(More customer reviews)
Like a number of the other reviews mentioned, the PSUS4 works fine as a printserver but the included setup software isn't worth even removing from the box. I am by no means a networking expert but I had the time to tinker with the device and found that you really need to be ready to configure the PSUS4 directly using your browser and then configure each computer for local printing by creating a new TCP/IP port using the IP address of the unit and configuring it for printing to "USB1". If this sounds complicated it really isn't and with a bit of searching you can find quick and easy instructions from an article on the Linksys website (note the lack of mentioning USB1 in the article).
Long story short, don't buy this if you want plug and play but if you have a basic understanding of networking you will find this works fine after a bit of a painful initial setup. I found that it took much longer just to find the information I needed than actually setting up the unit.

Click Here to see more reviews about: Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch

MODEL- PSUS4 VENDOR- LINKSYSFEATURES- PrintServer for USB with 4 port Switch Share your USB printer and expand your network with one compact box! The Linksys PrintServer for USB with 4-Port Switch is a doubleupgrade for your network. First it lets you connect a USB printerdirectly to your network eliminating the need to dedicate a PC toprint serving chores. Using a PrintServer frees up your "print share PC" so you do not have to leave it on all the time. It alsoremoves the printing bottleneck and sets your PC free to do moreuseful work. In addition the PrintServer includes a 4-port 10/100 switch so you can easily add more devices to your network. All four ports are auto speed negotiating and have automatic MDI/MDI-X crossover detection so you do not have to worry about the cable type. Each port independently negotiates the best speed and half- or full-duplex mode for up to 200Mbps of bandwidth per port. Fast store-and-forward switching prevents damaged packets from being passed oninto the network. A user-friendly Setup Wizard makes installation easy the compact case fits anywhere and the one megabyte print buffer size handles even large graphics-intensive print jobs. Let the LinksysPrintServer for USB with 4-Port Switch bring efficiency to your printing tasks and expand your network in one cost-effective device.* Share a printer with everyone on your networkworks with most USBprinters. * Connect your printer directly to the network with no need to dedicate aPC to print server chores. * Also expands your network with a built-in 4-port 10/100 Ethernet switch* Remotely administered through your web browser or the included utility. SPECIFICATIONs CONNECTORs- (4) 10BaseT/100BaseTX/RJ45 ports(1) USB port

Buy Now

Click here for more information about Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch

Read More...

Friday, December 2, 2011

LTS LTCIP830MV-W Wireless+RJ45 640x480 IP Camera with 30 IR LEDs and MicroSD Card Recording, White Review

LTS LTCIP830MV-W Wireless+RJ45 640x480 IP Camera with 30 IR LEDs and MicroSD Card Recording, White
Average Reviews:

(More customer reviews)
Update:
I attached a video recorded from the Active X viewer from Internet Explorer. I was at work when I connected and was surprised to see my older son in my younger son's crib! You should get an idea of the audio and video quality. The camera was in wireless mode. It created a .asf file, but I changed the extension to .wmv to upload to Amazon.This is from a perspective of a Mac user with Snow Leopard 10.6.4. I uploaded a bunch of screenshots of the setup screens.
PC users can extrapolate the logic.
The hardware is EXACTLY the same as the Sharx Security VIPcella-IR S. It is also the same as the y-cam-knight - Google it.
I decided to save 50% of the cost of the Sharx Security VIPcella-IR S since I am very comfortable with computers and networks. By reading the excellent review of the Sharx, they are mostly from the added software and support. Once you figure this camera out, it will perform exactly the same as the Sharx Security VIPcella-IR S. (I haven't tried the mini-sd card yet)
At first, I thought, I'll just use the Y-cam Mac setup software, but it didn't find the camera.
The VERY first thing I did was to plug an Ethernet cord to the back of the Camera so that it can get an IP address from my Airport Extreme Router.
Then you have to determine what IP was given to the Camera so you can connect to it via the browser. Just follow the steps in the screenshot.
Once you have the IP address, simply type it in Safari and the default username and password is admin / admin.
From there you can mess with the settings.
Be sure to download the FREE y-cam app from iTunes so you can use your iTouch or iPhone as a super clear baby monitor!
The unfortunate thing is that there is no sound.
TO ACCESS OUTSIDE YOUR HOME
If you want to access the camera outside of your home, it is best to give it a DHCP Reservation:
In the AirPort Utility, click DHCP
Then under DHCP Reservations, click the + sign
Give it a Description and select the MAC Address (I copied and pasted it from the "System" Screen of the Camera settings
Then give it a valid IP address.
So whenever you restart your Airport, it doesn't give the Camera a different IP address.
Then you have to Configure Port Mappings.
I changed the port of the camera to 8081 just in case someone randomly gets my home IP address. The default is port 80, which any browser will automatically connect.
Just change all the ports in the Port Mapping Setup Assistant in the Airport Utility to match the port you picked, and the Private IP address will be the IP of the camera you chose above.
If you are geeky enough to understand the above, then you can save yourself about $150 bucks from the Sharx since they apparently do a great job of simplifying it for the end user. The LTS is the SAME hardware, but it isn't as "Plug and Play" - Software and support make the Sharx a winner. I didn't have to call LTS support so I have no clue how they are.
All the other reviews to the Sharx in regards to performance will be relevant to this camera.
I'm thinking of buying another LTS LTCIP830MV-W Wireless IP Camera with 30 IR LEDs and MicroSD Card with the money I saved :-)
Hope this helped!

Click Here to see more reviews about: LTS LTCIP830MV-W Wireless+RJ45 640x480 IP Camera with 30 IR LEDs and MicroSD Card Recording, White

The LTS LTCIP830MV makes advanced technologies simple. The LTCIP830MV can connect to the Internet over wireless networking or 10/100 Ethernet lines. With simultaneous MPEG4 / MJPEG compression and 3GPP, the LTCIP830MV provides smooth live view with audio to multiple platforms including Apple Macs, iPhone and other 3G mobile phones. The user-friendly web-based set-up interface allows you to connect your camera anywhere and whenever you need. With 30 iR LEDs you can view objects in extreme low light conditions up to approximately 39 feet. Built-in MicroSD Card slot can store video directly to MicroSD Card without connecting to a network or PC.

Buy NowGet 15% OFF

Click here for more information about LTS LTCIP830MV-W Wireless+RJ45 640x480 IP Camera with 30 IR LEDs and MicroSD Card Recording, White

Read More...

Monday, October 10, 2011

Panasonic BB-HCM371A Outdoor Wireless Network Camera Review

Panasonic BB-HCM371A Outdoor Wireless Network Camera
Average Reviews:

(More customer reviews)
I looked for a long time for a remote camera to keep an eye on a vacation residence. Reviews of other similar cameras like the Toshiba IK-WB11A were spotty at best especially when using in wireless mode. Panasonic cameras seemed to get good reliability reviews, so when an outdoor wireless-G came out I decided to give it a try. I had some difficulty getting the ports forwarded through my router. The directions are pretty sparse when it comes to setting up your router. I guess there is a fair variability in how each different router is set up. Once that problem was solved it has been rock solid. In the 4 months I have had it running, I only had to reset it once, after a 3 day power failure. Actually, I think it was the router, not the camera that needed to be reset, but I reset everything. It does everything it is advertised to do although I don't use the audio feature. The motion detection feature works better than other webcam security software that I have tried.
Addendum:
I have now had this installed over 4 years and it continues to function as good as the day I bought it. As it is in a vacation home and I am frequently gone, I have had some problems with loss access via the internet. It appears that this is secondary to flaky DSL router. I finally purchased a simple timer at the hardware store. It turns off the router every night at midnight and then turns it back on a minute later, effectively resetting the router each day. Since then no problems. It doesn't require a computer to be running so both the router and the camera boot back up following a power failure.

Click Here to see more reviews about: Panasonic BB-HCM371A Outdoor Wireless Network Camera

Outdoor Wireless Network Camera with 2-Way Audio

Buy NowGet 44% OFF

Click here for more information about Panasonic BB-HCM371A Outdoor Wireless Network Camera

Read More...

Sunday, October 2, 2011

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver) Review

IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)
Average Reviews:

(More customer reviews)
The print server hardware worked fine, but the setup software
caused a few problems as a result of oversimplication.

I was able to get the server going with a Brother HL-5150D USB
printer on a home network with 4 computers (3 wireless, 1
ethernet), an all-in-one networked device and the USB
printer itself. This is using a mixture of computers with
different flavours of Windows XP. The print server is wired to
a router using DHCP. I did not chose to put the print server on
a static address (as the manual prefers) since that does not
reflect my network setup (home networks are usually DHCP).
I encountered problems because:
(a) My software firewall first caused the installer to crash.
I wanted to avoid turning it off entirely, but
to no avail. I was able to leave my router's hardware
firewall on but had to turn off my software firewall
for the installation. The manual asks that firewall
be turned off at installation, but I find that drastic.
I guess I should have cut off my internet connection when
I did this.
(b) I installed my printer drivers and print server back-to-back
without rebooting the computer in between. The manual
allows for this but I was not able to avoid the "the
segment of the print server is different from your
computer" error no matter what I tried. So I rebooted
and started the print server install a second time over.
Worked fine. The manual's guidance for this error was
incorrect in my case.
So, if what I've learned applies:
(i) install the printer driver as a normal USB
printer on your computers first.
(ii) reboot the computers
(iii) install the print server software.

Did this for all computers on the network, and
now I can print from anywhere (note that I did not
reconfigure the print server hardware each time, only
on the 1st computer, but I don't see the harm if one
does it for each computer as long as one is consistent
in placing the same settings each time).
(c) The installation of the print server software caused
my printer settings to go from "Use Printer Online"
to "Use Printer Offline". My printer swallowed all
my jobs because of that and no pages were coming out.
To remediate this go to the "Control Panel", "Printers",
"Viewed my installed printers",
right click the printer and select "Use Printer Online".
Did this for all computers.
Everything worked after that, with all firewalls reenabled.
Some day in the future, the network will go down
(power outage or other), and DHCP router might
assign a different dynamic IP address for the print server.
If that is the case, I'll have to point my computers to the
new IP address. To findout what your computer thinks the
printer address is: "Control Panel", "Printers",
"View installed printers", right click the printer and
select "Properties". Select the "Ports" tab,
then "Configure Port". Then compare the IP against the
new address your router gave to the print server
(go to your router's web page to find out). If they don't
match then you'll need to reconfigure. That said, I tested
a new IP address on the print server by power cycling it.
I then rebooted the computers and found that the new print
server address had been matched automatically on my
PCs. So things can fix themselves even if the network goes
down (the name of the port was still had the old address,
but the actual address it used was the new one...)
I've not tried this with IPP printing (remote location
printing, not did I test it under Linux or Mac).
The print server's web access is rather primitive.
But it has all I need. I intend to use this with Linux too.
The device worked as advertised and I am satisfied with it.


Click Here to see more reviews about: IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)



Buy NowGet 40% OFF

Click here for more information about IOGEAR USB 2.0 Print Server, 1-Port GPSU21 (Silver)

Read More...