Showing posts with label mac. Show all posts
Showing posts with label mac. Show all posts

Monday, July 16, 2012

Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port Review

Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port
Average Reviews:

(More customer reviews)
Got this primarily so we could work anywhere in the house on our PC laptops. Granted, a Linksys wireless router would have been cheaper, but the Airport Extreme also serves as a wireless print server and that (plus the fact that our primary computer is a Mac) was what sealed the deal for us. Our cabling setup is:
Cable modem -> Linksys Wired 4-Port Router -> Airport Extreme -> Lexmark Optra E312L
Our laptops use Linksys Wireless-G cards and get good reception throughout the house. Our G4 and PS2 are hooked directly into the wired Linksys Router for their connectivity. The trick to using it with an existing router is to turn off the NAT addressing feature of the Airport Extreme so that it acts only as an Ethernet "bridge" to the wireless computers; the Linksys router assigns all the IP addresses for everything on the system including the PC laptops. The PCs can print wirelessly to the laser printer via the Airport and so can the Mac. Bonus!
Setup was very quick - about 15 minutes to get everything plugged in. The hard part was getting the security set up correctly (and yes, you'd better secure your wireless network) as the format for passwords was different on the Mac vs. PC platforms. Had to do some Web searches to find out how to make them speak the same language (hex). Has worked flawlessly since then. If I had to do it over, would buy it again in a heartbeat.

Click Here to see more reviews about: Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port

The AirPort Extreme Base Station with Modem and Antenna Port is compatible with the industry-standard 802.11b wireless networking protocol, which means all AirPort products, as well as Wi-Fi certified 802.11b wireless products. For higher performance you will need to have both the Airport Extreme Card and the AirPort Extreme Base Station. The range of AirPort Extreme is up to 50 feet at 54 Mbps and up to 150 feet at 11 Mbps. The Base Station can be used in conjunction with an Ethernet connection (such as with a cable modem, DSL modem, or Ethernet network) through the integrated Ethernet port, or with a telephone line through a modem.
The AirPort Extreme Base Station with Modem and Antenna Port also supports USB or Ethernet wireless printer sharing. Just plug in a compatible USB or Ethernet printer and with Mac OS X on your computer you can quickly and easily print. You can use the new USB port to attach a USB printer or use the 10/100BASE-T Ethernet LAN port to plug in an Ethernet printer directly into the base station.
With the new AirPort Extreme Base Station with Modem and Antenna Port, up to 50 users can work and play on the Internet simultaneously up to 150 feet away from an Ethernet connection or a phone line. The Base Station comes equipped with a built-in firewall to protect sensitive data on your computer and the ability to secure transmissions with support for 128-bit encryption.
The AirPort Extreme Base Station with Modem and Antenna Port lets you manage the range of your wireless network. An external antenna port is provided for you to attach an external antenna. There are two types of antennas available: an omni-directional and a directional, which extend the range of the AirPort Extreme base station. There is also a software feature that allows you on reduce the size of your wireless network, down to just a single room for extra privacy.

Buy Now

Click here for more information about Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port

Read More...

Tuesday, July 10, 2012

D-Link Wireless G USB 2.0 Adapter 802.11g, 54Mbps Review

D-Link Wireless G USB 2.0 Adapter 802.11g, 54Mbps
Average Reviews:

(More customer reviews)
I like this little gem. I had a PCI wireless card for my desktop that was several years old and no longer supported by the manufacturer. I needed to upgrade, but I wanted a USB wireless adapter this time around. I wanted to get it out from the bottom of my desk so I could a better signal. I had certain requirements for my new purchase. It couldn't cost any more than $45. It had to be USB. And it had to have some sort of USB extention cable or cradle. It had to be reviewed by Windows Vista users. It also had to have excellent reception. I don't have a big house, but there were a lot of walls and electronics near and in between the Access Point and my computer.
After searching I found the DLink Wireless G adapater fit the bill. I picked it up for $30 (at least $10 less than local stores). All of the reviews talked about great reception, even indepent review sites. And it had the USB craddle I was looking for. I bought it and got free shipping along with it! What a Deal!
I've had this little gem installed for about one month now, I coudn't be happier. It gets great reception. This adapter runs absolutely great with Vista. I am also using the included connection software and it plays very well with Vista.
The only downside is the optional craddle. It requires either a direct computer USB port, or a powered USB hub with an external power supply. It draws more mA than a non-powered hub can handle (at least it did on mine). I had to use the power supply on my USB hub to get the craddle to work. This is the only reason I give it 4 stars instead of 5.
I highly recommend this product. You will not be disappointed.

Click Here to see more reviews about: D-Link Wireless G USB 2.0 Adapter 802.11g, 54Mbps



Buy Now

Click here for more information about D-Link Wireless G USB 2.0 Adapter 802.11g, 54Mbps

Read More...

Wednesday, July 4, 2012

Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A) Review

Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A)
Average Reviews:

(More customer reviews)
Ah jeez, what can I say. I can do most anything with a computer, Apple or PC, but when I try to configure a network, gremlins keep any of it from working. When my Netgear "lost its settings" spontaneously, they were kind enough at technical support to offer to fix it for me for 99 bucks. When I declined they offered up that I might go to their website for support tips. But I had spent too many hours when I first bought that router, I was done. So I purchased this router and it is just like other reviewers have said: plug it in, stick in the disk, answer a few simple questions, and it's done. THIS is how consumers LIKE computers to work. Bemoan the higher price tag if you want, but I will pay a little extra for things that just do their dang job and don't aggravate me NEEDLESLY!

Click Here to see more reviews about: Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A)



Buy Now

Click here for more information about Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A)

Read More...

Wednesday, June 27, 2012

Panasonic Network Camera and Pet Cam (BLC1A) Review

Panasonic Network Camera and Pet Cam (BLC1A)
Average Reviews:

(More customer reviews)
The BL-C1A is listed as "requiring" both Windows and Internet Explorer. After a bit of experimenting, it seems it doesn't, and is perfectly usable with Ubuntu (or indeed any OS) and Firefox. No need for Windows at all.
So, for anybody else who wants to use the BL-C1A camera with something other than Windows here's how.
First, ignore the shiny Windows CDROM in the box. Plug the camera into your router with your own network cable (they don't supply one!) and plug in the power supply. Wait a minute. If your router is 192.168.0.1, the camera should default to 192.168.0.253 (or 192.168.1.253 for a 192.168.1.1 router, etc).
From Firefox on the local network just go to the IP addess of the camera (as above) followed by ?mode=local and you should get the camera's built in web server. (The mode=local is essential, to activate it). Create an admin userid/password, hit enter. That's it.
Configuring the cameras for static addresses, different ports etc is all done via the web interface after that point, so still doesn't need Windows or IE in any way.
With a few lines written in the manual they could drop the Windows/IE requirement.
Camera works very nicely, and so does emailing, and the viewnetcam dynamic dns service (after a bit of a battle with router settings). One warning: you can't test the viewnetcam service from the same network that the camera is on, so before you think it's not working try it from elsewhere!
Camera does the job fine for the price, one point deducted for not having any non-Windows installation instructions.

Click Here to see more reviews about: Panasonic Network Camera and Pet Cam (BLC1A)


Package Contents: Panasonic BL-C1A Wired Network Camera, bracket, power supply, mounting hardware, CD-ROM, software and instructions.
The Panasonic BL-C1A Wired Network Camera handles your digital photography needs at a price that won't hurt your wallet! This color surveillance camera allows remote video monitoring of a home or business. Remote home and business surveillance just got a lot more affordable. Receive an e-mail image when the home security camera detects motion--you'll always know what's going on at home or at your business. The 10X digital zoom and color night viewing makes sure you don't miss a detail. It's easy to install, easy to operate and requires no additional software for viewing on your PC. Indoor use only.
Server Features: Image Buffer--About 250 frames (320 x 240, standard image quality). Image transfer via e-mail (SMTP) or FTP. View snapshots and control them from a compatible cellular phoneSupports up to 12 camerasIPv4 Multi-Language Interface -English, German, Spanish, Italian, French and Japanese
Camera Features -1/4 320,000 pixel CMOS image sensor 10 digital zoomViewing Angle -53° horizontal, 41° verticalAuto exposureAperture -F2.8Illumination -10 - 10,000 lux (normal), 4-10,000 lux (night view) Motion Sensor with Email AlertAuto & manual White Balance Network Connection -RJ45 Ethernet (10Base-T/100Base-X) System Requirements -Windows 98SE, 2000, ME and XP; Internet Explorer 6.0 or later Camera Dimensions(WxHxD) -3-3/8 x 3-3/8 x 1Weight -0.22 lbsNetworking Protocols -HTTP, FTP, SMTP, TCP, UDP, IP, DHCP, DNS, ARP, ICMP, and POP3 before SMTP

Buy NowGet 20% OFF

Click here for more information about Panasonic Network Camera and Pet Cam (BLC1A)

Read More...

Saturday, May 19, 2012

Belkin Wireless-G Router DSL/Cable Gateway Review

Belkin Wireless-G Router DSL/Cable Gateway
Average Reviews:

(More customer reviews)
I think this router might be getting a bad rep on the wireless end, because it comes with a proprietary setting enabled by default that I think does more harm than good. If you have this router and are getting intermittent or no wireless connectivity, and you've verified all your settings are right, try this.
This router (Belkin model F5D7230-4, and other models) has a (proprietary?) feature called "Protected Mode". The default setting on this model (at least the one I got), unlike other models, has that mode set to "Auto" under the Wireless settings, which I take to mean "on". So turn it off. It's wonky, because even tho it's a proprietary feature, there is NO documentation in the router's online "Help" section. However, it IS described in the user's manual:
"As part of the 802.11g specification, Protected mode ensures proper operation of 802.11g clients and access points when there is heavy 802.11b traffic in the operating environment. When protected mode is ON, 802.11g scans for other wireless network traffic before it transmits data. Therefore, using this mode in environments with HEAVY 802.11b traffic or interference achieves best performance results. If you are in an environment with very little--or no--other wireless network traffic, your best performance will be achieved with Protected mode OFF."
Okay, so if it works best off, why does it ship in "Auto" mode? Turn it off. On other models, by default it does ships with the feature "off".Basically, I recommend setting this router up as simply as possible, but still having wireless encryption, of course.. So here are my further recommendations for setting this up. There's another (proprietary?) feature called "Turbo" mode. Again, no description of this on the interface itself, but it is described in the manual:
"Turbo mode is enabled by default. It allows the Router or Access Point to use frame bursting to deliver the maximum throughput, 2 times faster than any standard 802.11g equipment, to 802.11g clients. This measurement is based on aggregate throughput in a mixed 802.11b and 802.11g environment. Belkin 802.11g clients with the latest driver will support Turbo mode. Clients that do not support Turbo mode will operate normally with it enabled."
Again, I recommend turning it off. I also recommend deleting "Belkin Router" from the "domain" section under (I think) LAN settings, just keeping that field blank, and leaving wireless Channel as Auto (default choice, which normally goes to Channel 11 in the USA). And, as with any wireless rouer, you DEFINITELY want to put in a new wi-fi network name (SSID). Change the default SSID to something impersonal, but still unique. Further recommendations are keeping the thing well-ventilated, such as propping it up (securely) at an angle so air flows below it, above, and around the sides, and adjust the antenna of course then so it is vertical. Another thing I did was to turn Range Extension on, but I'm not sure that's necessary or if it just creates unnecessary heat, but since my friend was across the country, I was trying to pull out all the stops.
I chose this router for a friend (who purchased it on their own, and then I set it up). I chose it because it was the cheapest one in the store, and Belkin is a generally respected name when it comes to all their equipment (if often having the reputation of being a little expensive), and my past knowledge of their reputation with routers was good. Even though they don't make them themselves, but farm them out to others, their choices in the past have been good.
I initially set the router up at my home. I noticed that I had trouble connecting using Vista's wireless connection wizard, and I hate wizards and Vista's "wow" crap in general, so I got frustrated and found a "connect manually" choice, which was a whole lot easier for me, and after that, I was able to connect fine wirelessly for that time I was setting it up. However, my friend took it home and reported back that the laptop wasn't connecting, then it did, and then it stopped after a few minutes. Only then did I come to Amazon and read the reviews, where I saw so many others having similar issues. I suspected Protected and/or Turbo modes, so I did a little research, which confirmed my suspicions. I read a review of a similar Belkin router, the following excerpt summing it succinctly: "[Protected Mode] seems to make the network invisible to wireless devices you may be trying to set up for the first time".
With my friend having gone home (across the country), I was relieved to find this router has a remote admin mode (called Remote Management in the router). I learned this by downloading the User Manual. The manual doesn't have great screen shots, and my friend is not tech-savvy, but after only moderate pain, I had them successfully enable Remote Management, and tell me the WAN IP address (which, strangely enough, is nowhere to be found under WAN Settings--you have to go to the "Home" page of the interface, and it tells you there). I was then able to plug their WAN IP address into my browser, and wham--I'm signing in and configuring their router from across the country (we had set up an Admin Password together before leaving--very important).
So after disabling Protected and Turbo modes remotely, and doing my other recommendations above, my friend's laptop then connected immediately and automatically, with no action on their part (I had originally set up the laptop with the router when my friend was here). The connection now seems reliable and strong. My friend commented that it seemed fast. I think this is a good router for a beginner or someone who wants to purchase & config it for a less-advanced user. First, it looks cool in person, which means a surprising amount to newbies (frustratingly), but more importantly, the interface is very easy to understand, and well laid-out and not intimidating or illogical, unlike some of D-Link's later interfaces. Part of that is the logical layout itself. Some part of that is the absence of a lot of advanced features most people will never use, such as being able to tweak the Beacon and Broadcast Interval settings on wireless. However, the truly important advanced features seem to be there, such as MAC address filtering (both wired and wireless, where some routers won't let you filter wired MAC addies), Remote Admin, and the standard fare. The only thing I noticed that i'd like to see would be an option to completely disable the radio from the interface (because apparently the antenna is non-removable/non-upgradeable), but then again, you CAN set the radio to not broadcast its SSID (network name).
I liked this router enough that I only half-jokingly offered to my friend to trade my current router for this one--an offer which was promptly declined! :)
The router has 4 or 5 wired network ports in the back. It feels very lightweight. I didn't see any holes for airflow or heat management and it does not stand on its side, which is why I recommended leaning it against something on an angle (airflow is an issue on most home routers). The LED light array on the front seemed less obnoxious than D-Link's. For wi-fi encryption, I chose WPA-PSK. The password field is less confusing than some other brands, and it lets you choose either a hexadecimal or plain-text password, and it doesn't make you fill up all 64 or 128 characters, unlike some other brands I've seen IIRC, which can ironically make for a more complex password in some cases, because people can pick a long phrase they can actually remember. The passphrase we chose was long and plain-text, but did not use all the characters allowed, and it worked just fine with the Vista laptop.Further recommendation: if you're not a newbie, you'll know you don't have to run that silly "installation CD" that comes with the router. They REALLY encourage you to run the CD before you do ANYTHING, even before plugging in the router. It is obviously aimed at trying to cut down on the amount of tech support calls, which in spirit is a good idea. However, this gives new users the impression that routers need some kind of "driver" to work properly on a computer, which isn't true. Although the CD is probably nothing more than a glorified Computer-Based Training session, I wish they'd just provide a real manual instead (they do provide a paper Quick Start Guide). However, newbies will probably appreciate the interactive guidance and it does sound like a good idea for them. I don't know how many other companies are doing this now (nothing similar came with the 2 other routers I've bought, although the second one did have a "Wizard" built into the interface), but this could be a value-added feature for beginners who don't have a generous computer-savvy friend.
The default gateway address for this router is 192.168.2.1, not the traditional ~.0.1. This is good, because most DSL and cable modems are now selfishly commandeering ~.0.1. Another good thing is that I was able to do either all or almost all interface functions in Mozilla (Firefox of Seamonkey) browsers. I think there may have been one screen where I needed to switch to IE, though; I can't remember. I know that tonight when I did remote admin for my friend, I didn't have any problem. I made a bookmark for 192.168.2.1 in my friend's Mozilla browser before leaving, and named it "Router". This way, I could just tell them to drop down Bookmarks, and choose "Router" when the inevitable tech support call came.
I didn't bother updating the firmware, because I usually don't mess with firmware unless something's not working right--and I almost did so tonight in attemt to solve the wireless problem. Since updating firmware usually resets all previous settings (and often,...Read more›

Click Here to see more reviews about: Belkin Wireless-G Router DSL/Cable Gateway

Creates A Network In Home Or Office Without Cables Offers Backward-Compatibility With All 802.11B DevicesAutomatically Detects Internet Settings & Self-Adjusts Router To Get User Online In Under 3 Min54 MBPS Wireless 64- & 128-Bit Wep Encryption Ensures Data & Network SecurityNat & Spi Firewall Protects Network From Outside Intrusions By HackersWorks With Mac & PC ComputersIncludes Wireless G Router Power Supply User Manual Quick Installation Guide Rj45 Networking Cable & Software CD Lifetime Warranty

Buy NowGet 33% OFF

Click here for more information about Belkin Wireless-G Router DSL/Cable Gateway

Read More...

Friday, April 20, 2012

Cisco-Linksys WRT54G2 Wireless-G Broadband Router Review

Cisco-Linksys WRT54G2 Wireless-G Broadband Router
Average Reviews:

(More customer reviews)
This was very easy to set up. It took about 5 minutes total to set up the router and have a wireless connection to my desktop. I have an excellent reception to my desktop that sits about 30 feet away in another room. Also, I have my desktop and laptop (both running vista), xbox 360, and ps3 connected to it wirelessly. the xbox 360 NAT is open and the ps3 NAT is type 2. I'm not sure what that stuff means technically, but in normal person terms it means that I can connect to others with no problems. The back of the router has 4 10/100 ethernet connections on it as well if you want a wired connection.
The design of this router is really excellent. The antennas are built into the router and the dimensions of it are really small and thin! This gives you more flexibility of where the router can be placed.
Streaming recorded TV, music, and pictures from my desktop to xbox (using media center) work well for both being connected wireless with no reduction in picture quality.
With the release of the new Xbox 360 dashboard I am able to stream HD video from Netflix wirelessly through my 360 with this router. The wait time for video to start is short and the picture quality of HD shows like Heroes and 30 Rock is great.
*Update* I have had the 20" 2.66ghz iMac since May 08 and connecting it to my linksys was as simple as selecting the network and typing in my password. The router has been up and running several months now with no resets or connection issues. This is a very stable router that requires little to no maintenance. Now my connections to this router are a laptop with Vista every now and then, Mac with OS X 10.5, ps3, 360, and 2 iPhones. There are no problems when 2 or more devices are using the connection. I am connected to a 6mbps cable connection.
Recently I got the new unibody MacBook and an eyeTV hybrid 2009 model. I use it to record TV (mainly the HD shows sent via QAM from comcast) on my iMac. I want to stream a HD show like The Office from my iMac to my macbook that is connected my my 46" samsung (lnt-4665), but I have found that "g" is not fast enough to stream a show recorded in HD. It is fast enough to stream a show recorded in SD, so I need an "N" router if I want to stream wirelessly.

Click Here to see more reviews about: Cisco-Linksys WRT54G2 Wireless-G Broadband Router

The Linksys Wireless-G Broadband Router is really three devices in one box. First, there`s the Wireless Access Point, which lets you connect both screaming fast Wireless-G (802.11g at 54Mbps) and Wireless-B (802.11b at 11Mbps) devices to the network. There`s also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together. Connect four PCs directly, or attach more hubs and switches to create as big a network as you need. Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection.

Buy NowGet 7% OFF

Click here for more information about Cisco-Linksys WRT54G2 Wireless-G Broadband Router

Read More...

Tuesday, April 10, 2012

Cisco-Linksys WRT51AB Dual-Band Wireless A+B Access Point + Router with 4-Port 10/100 Switch Review

Cisco-Linksys WRT51AB Dual-Band Wireless A+B Access Point + Router with 4-Port 10/100 Switch
Average Reviews:

(More customer reviews)
The Linksys WRT51AB does not deliver at all. Using the 802.11A radio, we've experienced nothing but lockups. The router locks up which then locks up the computers attached to the point the keyboard and mouse do not respond. With the cards set for ad-hoc and the router unplugged, the network runs fine. Three months of constant contact with Tech Support has netted us repeated canned responses that do not resolve the issue. Please, do not buy this product. I am a certified network engineer with 12 years experience. I tried more possible solutions than Linksys script monkeys can offer.

Click Here to see more reviews about: Cisco-Linksys WRT51AB Dual-Band Wireless A+B Access Point + Router with 4-Port 10/100 Switch

The Linksys A+B dual-band wireless broadband router is like four devices in one box. The router function lets you securely share one high-speed Internet connection among your entire network, while the four-port, full-duplex 10/100 Mbps switch jump-starts your wired Ethernet network. Connect four PCs directly, or daisy chain out to more hubs and switches to create as big a network as you need.
The router also contains two wireless access points, which let you connect with wireless networked PCs using either the popular 2.4 GHz 802.11b standard at 11 Mbps, or the almost five-times-faster 5 GHz 802.11a standard. Since both standards are built in, you can protect your investment in existing 802.11b equipment today, and migrate to the 802.11a standard as your needs grow.
In addition to up to 152-bit encryption of wireless transmissions, the A+B dual-band wireless broadband router supports the industrial-strength wireless security of 802.1x authentication and authorization. The router also serves as a DHCP server, has NAT technology to protect against Internet intruders, supports VPN pass-through, and can be configured to filter internal users' access to the Internet. Configuration is a snap with the Web browser-based configuration utility.
With the Linksys A+B dual-band wireless broadband router at the center of your home or office network, you can share a high-speed Internet connection, files, printers, and multiplayer games with the flexibility, speed, and security you need.
Note: All Linksys routers now include a special edition of Norton Internet Security! Claim your free CD-ROM by calling (800) 814-0180, 7:00 a.m. to 7:00 p.m. Pacific time, seven days a week.


Buy Now

Click here for more information about Cisco-Linksys WRT51AB Dual-Band Wireless A+B Access Point + Router with 4-Port 10/100 Switch

Read More...

Monday, February 6, 2012

Linksys WRT150N Wireless N Home Router with 4-Port Switch Mimo Review

Linksys WRT150N Wireless N Home Router with 4-Port Switch Mimo
Average Reviews:

(More customer reviews)
This linksys N router is wonderful. It was easy to get up and running on the standard linksys firmware, which I later upgraded to DD-WRT [...]. I used the mini generic v24 beta version first, and then upgraded to the non-mini version, and now I have a FULL featured wireless N router.
One thing to note, DD-WRT reports this router as a WRT300N, so keep that in mind when you make your purchase :)
Other than this, the features are great, the price is right, and it's simply a solid router. Combine this with a gigabit switch and you'll have the best, most affordable home network.

Click Here to see more reviews about: Linksys WRT150N Wireless N Home Router with 4-Port Switch Mimo



Buy Now

Click here for more information about Linksys WRT150N Wireless N Home Router with 4-Port Switch Mimo

Read More...

Friday, December 23, 2011

D-Link EBR-2310 Ethernet Broadband Router Review

D-Link EBR-2310 Ethernet Broadband Router
Average Reviews:

(More customer reviews)
I was using a Linksys wired router/switch for a few years. I was constantly losing VPN connection and having to re-connect. I put in VOIP (Vonage) phone and had to restart every 3 hours. I thought I had cable modem problems, network problems, config. problems on router. Finally, I ordered the D-Link EBR-2310 (because it was very inexpensive). I took it out of the box, plugged it in, connected my (4) network cables including a wireless connection. In 6 weeks I have not had a single connection problem. WHAT A DIFFERENCE! - highly recommended.

Click Here to see more reviews about: D-Link EBR-2310 Ethernet Broadband Router

Ethernet Broadband Router

Buy NowGet 36% OFF

Click here for more information about D-Link EBR-2310 Ethernet Broadband Router

Read More...

Friday, November 11, 2011

D-Link DCS-930L mydlink-Enabled Wireless N Network Camera Review

D-Link DCS-930L mydlink-Enabled Wireless N Network Camera
Average Reviews:

(More customer reviews)
I purchased this camera to use as a cheep wireless IP webcam. It offers the ability to hook into your network either with the wireless WSP functionality or with an ethernet connection. It is fairly small with the camera being about the size of an iphone (maybe about 80% that size). The base allows for you to mount it in multiple settings, but be clear, this is a very simple design...not rocket science by any means. The ac power cord is about 4 feet long.
Setup: I ran into an issue when I was trying to set up the wireless connection. I could not get my camera and wireless router to talk at all. I called tech support (the free version) and they were useless. The rep had no clue about the specific devise and it is clear that he was just in a large call center that probably supports dozens if not hundreds of products. I had NO problem when I hooked it into my network via an ethernet cable. The set up application runs very nicely and easily gives you the option to select either wireless or wired set up as needed.
Back to my wireless problem. I decided that I would pay $32 for D-Links premium support for 30 minutes of help...I rolled the dice, as they do not guarantee they will fix your problem for your investment, but I had a feeling my issue was something simple with my network configuration...and I was right. The rep was great, she remoted into my pc, checked out my wireless settings on my router and determined that I had a bad character in my site name. None of my other wireless products had a problem with the character, but the D-Link cam did not like it. She changed the name of my wireless network, we restarted the router,and instantly the camera linked in wirelessly.
I am absolutely convinced that if I had not had a dash in my wireless network name, then this wireless set up would have been a breeze. So, I can't place blame for this issue on D-Link, but it was interesting that no other wireless device I use had a problem with the naming convention of the network.
Once that hurdle was cleared, it has been smooth sailing. I really like the ease of use and the functionality included with the set up...through a web interface, you can control video size, audio (yes it has a mic and sends the audio over IP in realtime), you can set motion detection, auto emailing on detection, and it even has a built in ftp server to send the images where ever you like.
Simple camera that does exactly what it says...it provides decent video and audio wirelessly to your network and then you can do with it what you want.
Pros: Simple, straight forward, nice setup application used on your pc, D-Link offers free remote viewing via their web portal MyD-link, and they also offer a free iPhone app (no audio on the iPhone app).
Cons: Seems somewhat fragile...I would not want to drop it form more than a foot off the ground. A fall from any higher seems would shatter it.
Overall I think this is a really good value.


Click Here to see more reviews about: D-Link DCS-930L mydlink-Enabled Wireless N Network Camera


Stay connected to everything that you love 24/7 with the D-Link DCS-930L Wireless-N network camera, which is compatible with the mydlink portal (mydlink.com)--allowing you to easily and securely view and manage the camera from virtually anywhere over the Internet. With its small size and easy installation, the DCS-930L is a discreet and flexible way to check on your home, children, or pets in real time--even on an iPhone, iPad, or iPod touch.
The DCS-930L is ready to be viewed over the Internet in just three simple steps(see larger image).

Buy Now

Click here for more information about D-Link DCS-930L mydlink-Enabled Wireless N Network Camera

Read More...

Wednesday, September 21, 2011

NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch Review

NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch
Average Reviews:

(More customer reviews)
I have a wirelss network w/3 pc's, one Mac Powerbook, w/netgear router, and now the WGPS606 netgear printserver (my motorola WPS870G was half the $$$ and easier to set up on my Powerbook, but got killed by lightning storm yesterday); I have an old laserjet & HP officejet d145. Contrary to rumors, you can get the WPS870G to printserve wirelessly from Mac/OSX through the network (i.e., powerbook is wireless, printserver is also wireless)
1-I set a dedicated IP address in my router to associate w/my printserver...To do this: in 192.168.0.1 (which is the router) I renewed IP addresses, looked into the router's assignment table, and figured out that the printserver was at 192.168.0.4, so I just assigned it to 192.168.0.4; to do the assignment, you also need the device (i.e., the printserver's) MAC address; that's the trick...the MAC address on the netgear printserver is called the "device" or "hardware" MAC address, and it's the number printed on the box itself; if you go to the printserver ip address (in my case, 192.168.0.4), you find netgear's set up pages for the printserver; the printserver has two mac addresses, the 2nd is called something like the `wireless' MACaddress; that wireless MAC address (which is only different by one digit at the end) is what you use when you set up a dedicated IP address for the print server; when you've done all this, you should probably go back into 192.168.0.1 (your router set up pages) try to renew ip addresses to see if the assigned printserver address (in my case, 192.168.0.4) shows up and shows up with the right MAC address
3- when setting up a new printer in printer set up utility, you select IP Printing + LPD/LPR, printer address is your new ip address that you assigned (192.168.0.4 in my case) and queue name is L1 (presumably L2 if you have a second printer)
btw, you may need to upgrade the driver (I needed an HPIJS driver for my multi-function HP d145); the original driver didn't even install from the cd


Click Here to see more reviews about: NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch

With the NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch, users on your network have the freedom to print wirelessly to up to two printers. It also functions as a wireless Ethernet bridge, allowing you to extend your wireless connection and connect up to four users to your wireless network.
Wireless Printing and Bridge The WGPS606 has two USB ports to connect two printers. Simply put your printers wherever works best and plug them into the wireless print server; a Smart Wizard will guide you through configuration in just seconds. Once configured, anyone on the network can print to either printer; business documents can be sent to the high-end laser and photos can be printed on the photo printer. No separate adapters are needed. The print server can print via Peer-to-Peer (PTP) and Windows LPD printing methods.
The print server also functions as a wireless Ethernet bridge, allowing you to connect a cluster of up to four PCs and laptops without dedicated wireless adapters.
Secure and Compatible Powerful 40/64-bit and 128-bit WEP encryption and WPA-PSK keep your wireless network secure. The device is interoperable with 802.11b, 802.11g, and RangeMax (MIMO-G) networks, so you can be sure it will work with your existing wireless network.
The NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch is backed by a 1-year warranty.
What's in the Box WGPS606 54 Mbps Wireless Print Server w/4-port Switch, power adapter, 2 USB cables, resource CD, installation guide, warranty/support information card.

Buy Now

Click here for more information about NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch

Read More...