Showing posts with label wireless access point. Show all posts
Showing posts with label wireless access point. Show all posts

Wednesday, July 25, 2012

TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black) Review

TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)
Average Reviews:

(More customer reviews)
Home networking can be a real pain especially for someone like me who knows enough to be dangerous but not enough to be a network installer. I have a wireless router burried in my basement that wasn't getting signal to my upstairs part of the house. I tried two other different products 1) two routers connected to each other and 2) a Hawking repeater. I ended up wasting a lot of time with them and they just didnt work or had compatibility issues. I took a plunge on the no brand trendnet based on this other positive review and he was 100% right. The price is 50% cheaper than the comparable Linksys N switch and does exactly as advertised. Setup took 5 minutes and I now have coverage all over my house. No issues so far.

Click Here to see more reviews about: TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

TRENDnet TEW-638AP Wireless N Access Point TEW-638AP Wireless Access Points

Buy NowGet 41% OFF

Click here for more information about TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

Read More...

Tuesday, July 3, 2012

D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps Review

D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps
Average Reviews:

(More customer reviews)
I use this AP as a second broadcast point at the other side of the house because me router can't reach that far. The connection strength, even when going upa floor and over about 50 feet is "Very Good". The configuration, if you even want to do any, is very simple to acomplish. The speed is fine throughout the house.

Click Here to see more reviews about: D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps

The DWL-G700AP is Wi-Fi IEEE 802.11g compliant, meaning that it can connect and interoperate with other 802.11g compatible wireless devices. With the ability to transfer files at up to 54Mbps, the DWL-G700AP gives you high-speed wireless access. The DWL-G700AP is also backwards compatible with 802.11b networks and devices. With its Web-based setup wizard, the DWL?G700AP ensures that you will be up and running in just a matter of minutes. The DWL-G700AP also includes an embedded DHCP server that can automatically assign IP addresses to wireless clients. The DWL-G700AP features Wi-Fi Protected Access (WPA) to provide an enhanced level of security.

Buy NowGet 32% OFF

Click here for more information about D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps

Read More...

Thursday, June 28, 2012

Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security Review

Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security
Average Reviews:

(More customer reviews)
I recently purchased two of these Cisco WAP4410N WAPs. The goal was to help my brother-in-law cover his large home with good quality wireless. Based on my experience doing previous WAP installations, my guess was that is would take between three and six WAPs to full cover his large house (which has lots of brick and steel) with good quality coverage. I was impressed that by strategically positioning the units I was able to cover the entire house with only two of these WAPs. The coverage consisted of three floors (one was a finished basement).
The setup of these units was simple, the firmware is stable, and configuration was straight=forward. Since they were setup they have worked flawlessly and required no further attention.
The only thing a bit unusual (for those used to Netgear, Linksys, etc.) is that you have to setup a Cisco account (no charge just register online) to be able to download firmware, etc. This ended being unnecessary because the firmware in the unit was up-to-date.
If you're looking for really good WAPs that support Wireless-N and have lots of configuration options (e.g., Mesh, Multiple SSIDs, etc.) I highly recommend this unit. It has a slightly higher price than other (consumer units) you can buy, but it definitely deserves the "business-class" label that Cisco gives it.

Click Here to see more reviews about: Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security

Why string cables across your workspace when clients can connect to your internal network using wireless technology? Formerly Linksys Business Series, now Cisco Small Business Wireless Access Points, the WAP4410N is an 802.11n access point that provides secure, high performance network access.You can now extend your wired network to mobile employees within the workplace to keep them connected and productive.

Buy NowGet 34% OFF

Click here for more information about Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security

Read More...

Sunday, June 10, 2012

Netgear Universal WiFi Range Extender (WN3000RP) Review

Netgear Universal WiFi Range Extender (WN3000RP)
Average Reviews:

(More customer reviews)
I have been pleasantly surprised with this extender. My WNDR3700 is in the basement next to a large metal work bench and under a lot of metal piping. All of this interference creates a deadzone on the other side of the first floor in the two bedrooms. The house is wired, but this is really annoying for iPads and laptops. I was considering running some longer CAT5e and putting the router in the middle of the basement on a wall, but I tried this extender first.
It's a much more expensive solution than $6/50' of CAT5e (monoprice.com), but I also wanted to extend the WiFi out into the backyard. I plugged the WN3000RP into the wall, waited for the green ready light, pressed the WPS button on the WNDR3700, held down the WPS button on the WN3000RP, and the connection was made. I had a new network named MySSID_EXT with the same security and passphrase.
I tested it out with INSSID on my laptop and my WiFi Analyzer app on my phone. I wandered the house checking the signals. In the bedroom I had a very weak signal from the router(or no signal)and an excellent signal from the extender. In the backyard, I had no signal from the router and a still excellent signal from the extender. Speed tests showed no real difference in speed, but Netgear says you should expect some reduction in speed. It could impact video streaming or file sharing, but I haven't noticed any issues.
I would really like to see an extender like this that supports 5Ghz, but 2.4 is just fine for what I needed. I also don't have a lot of other networks nearby.
The house is 1,700 sq. feet on the first floor and the extender provides a signal everywhere. The backyard is fairly small, but I can go about 75' to my patio and still have an excellent signal (that's about 140' from the extender through a wall. The extender is placed at the edge of the deadzone, as Netgear says it should be.

Click Here to see more reviews about: Netgear Universal WiFi Range Extender (WN3000RP)



Buy NowGet 22% OFF

Click here for more information about Netgear Universal WiFi Range Extender (WN3000RP)

Read More...

Thursday, May 10, 2012

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE Review

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE
Average Reviews:

(More customer reviews)
I read the prior reviews but went ahead and bought this on the advise of a friend who intalls wireless networks for a living and he uses this access point a lot. I am completly pleased with this Linksys product. When you plan to use it for what it is designed for, an Access point, and don't have any notions that it is anything more, it chugs right along. I ran CAT 6 cable, (keeping under 300 meters total length) and used the AC adaptor supplied to power the unit. It is ran off a Linksys wireless-N router and a 5 station Linksys Workgroup hub. I mounted it in the downstairs coat closet behind my TV room and turned on my laptop, found it, and connected. I then entered it's webbased setup utility and configured it to my liking, (WPA2 security to match my wireless router) and I works like a charm. I am writing this review on my laptop, in my bedroom, where my upstairs router alone could never reach. I now have full bar service all over my complete property, inside and out. It is just what was needed.

Click Here to see more reviews about: Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Linksys Business Series WAP4400N Wireless-N Access Point answers your growing business' need for access, speed and security. Using the very latest wireless networking technology, Wireless-N (draft 802.11n), Multiple In, Multiple Out (MIMO) technology multiplies the effective data rate by overlaying the signals of multiple radios. The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point easy to install. You can mount the Access Point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Operating Channels -11 North America, 13 Most of Europe (ETSI and Japan) Receiver Sensitivity -11.n 300Mbps at -69dbM, 11.g 54Mbps at -73dBm, 11.b 11Mbps at -88dBM Security -WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Linux Operating System System Requirements -802.11b, 802.11g, 802.11n Wireless Adapter With TCP/IP Protocol Installed Per PC, Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE & Web-Based Configuration Java-Enabled Web Browser Dimensions -Width 7.80 x Height 5.16 x Depth 7.80-inches (198 x 131 x 198 mm) Weight -0.84 pounds (38 grams)Please note: A new firmware, which resolves wireless connectivity issues and other known bugs, has been released on www.linksys.com.

Buy Now

Click here for more information about Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

Read More...

Tuesday, April 3, 2012

150Mbps WIFI USB WIRELESS LAN ADAPTER 802.11 B/G/N Review

150Mbps WIFI USB WIRELESS LAN ADAPTER 802.11 B/G/N
Average Reviews:

(More customer reviews)
So I have been using this adapter for just over a week. My router is in the next room, 7 feet away, and while I do have continuous signal, I only get one bar out of 5 the majority of the time. I won't complain for the price, but I would be hesitant in buying this if you were using it at a farther distance from your router. I would try discovering the range it has myself, however I am using a desktop PC and not a laptop. Hope this may help others in their decision.

Click Here to see more reviews about: 150Mbps WIFI USB WIRELESS LAN ADAPTER 802.11 B/G/N



Buy Now

Click here for more information about 150Mbps WIFI USB WIRELESS LAN ADAPTER 802.11 B/G/N

Read More...

Monday, February 20, 2012

D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b Review

D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b
Average Reviews:

(More customer reviews)
Products Tested: D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b D-Link DWL-650 11Mb Wireless PCMCIA LAN Network Card 802.11b vs. Linksys WAP11 - Instant Wireless Network Access Point Linksys WPC11 - Instant Wireless Network PC Card
Computer Hardware: Laptop: Dell Inspiron 600mhz, W2k Network: NT 4.0 Server, W2K Server Switches: 3Com and Linksys
Quality: After working with dlink first, linksys blew away dlink on the feel of quality and workmanship. As we all know, these components are so miniaturized that they could put them into any light-weight enclosure. dlink chose the light packaging approach....feels "cheap." linksys chose the mid-weight package...you feel as if it has higher quality...and you got something for your $250-300! linksys chose the dual antenna design over the single on the dlink. Technically, I am not sure if it is better but the actual reception really is... These are subjective and personal factors but for most, it makes a difference.
Ease of Use: From the documentation, to the support, to the software, it is really apparent dlink cut costs everywhere and with things they shouldn't. The setup is extremely confusing, the software is buggy...really, and the docs are horrible. In my manual, every other page did not have printing on it...quality control missed this! Linksys...even though I had to use the USB setup at first (dlink does not have a USB port on their access unit), the configuration was simple. The docs actually explained the parameters on the configuration screens. Once I set the IP address to one recognized on my network (I am not using DHCP), I used the linksys SNMP configuration tool to set and adjust the other parameters. I have a laptop. When using the wireless network card on the dlink, if you eject the card, the next time you re-insert the card, it does not remember your setting. You have to go back and set the parameters in order to get the card to function again. I called dlink tech support on this...on hold forever, hung up, and no call back...even when they asked and I left my mobile number, just in case... On the linksys, when I re-inserted the wireless card, it remembered the setting.
Service and Usability: Both products have a signal and quality meter in their utilities. One important note...the distance specs on both of these products (I think the 802.11b category overall) are NOT accurate. Inside of your home and through walls, etc., expect much less. How much less...you need to try it out to be sure. If you have line of sight to the access unit, these distances will go up. I mounted the access unit in my living room, on top of the entertainment center. I chose this location b/c it had the best reception. With the dlink, in the master bedroom (through one wall!), I was *barely* able to use the network...0-40 on the signal meter. On one occasion, once the dlink card lost the network, I could not get back on?? The total distance to the access unit was 30ish feet. With linksys, my signal was consistent at 40-60...once or twice is dipped to 20-30 but came right back up. I also tried a configuration with the dlink access unit and linksys card. They did work together but I could not improve the signal quality. I concluded that the dlink access unit was one of the problems. When I used the dlink wireless card, several times my computer shut down automatically??
Overall: Save tons of time and money...just buy the linksys system...access point and cards. Linksys is priced well and makes a quality offering. It is very clear to me that dlink is just focused on price and cutting their cost.

Click Here to see more reviews about: D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b

The D-Link DWL-1000AP is an IEEE 8.02.11b-compliant, 11 Mbps wirelessEthernet access point designed for use in office and home environments. Itoperates in 2.4 GHz direct-sequence spread spectrum (DSSS), which providestransparent bridging and roaming capabilities to wireless nodes at ranges up to100 meters indoors and 300 meters outdoors. The DWL-1000AP supports Wired Equivalent Privacy (WEP), MAC address control, anduser authentication to ensure a secure network connection. When connected to anEthernet LAN, the DWL-1000AP automatically identifies the IP of the host PC aswell as the subnet. In addition, the IP address of the DWL-1000AP can bemanually assigned. The bandwidth data transmission rate can be set automaticallyusing the dynamic auto-sensing configuration or set manually to 11, 5.5, 2, or 1Mbps. You can manage the DWL-1000AP remotely with its access point manager software,which can be installed on Microsoft Windows 95 OSR2, 98, 98SE, NT 4.0, Me, and2000.

Buy NowGet 72% OFF

Click here for more information about D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b

Read More...

Friday, February 17, 2012

TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue) Review

TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue)
Average Reviews:

(More customer reviews)
I have a couple of computers in one room, connected via LAN to a Linksys Wireless G router/access point, which is connected to a DSL modem. I wanted to put another computer an an Ethernet-attached printer on the floor above. The standard way to do this would be to run a Cat-5 cable from the Linksys router to a small hub on the upper floor, and connect the new computer and printer to it. It would be a long and complicated run, though, and would involve drilling through the floor. Not impossible, but I didn't really look forward to doing it.
This device seemed to be just what I was looking for: a way to replace a long run of Cat-5 cable with a wireless link. Put the TRENDnet Access Point on the upper floor along with a small hub (the Access Point has only one Ethernet jack), and plug the computer and printer into the hub.
The Access Point offers five modes of operation. The one I expected to use is called "WDS", for Wireless Distribution System. From the user manual, it appears as if this is the mode for just extending a LAN as I wanted to do. I was never able to get this mode of operation to communicate with the Linksys router. The manual is not well written, and the help windows from the Access Point's built in web server are even worse. Using browsers to look at the settings of both the Linksys and the TRENDnet, I verified that everything that I can set was entered correctly: Channel number, SSID, passphrases, MAC addresses, everything. No connection was ever made, in WDS mode.
So I tried "AP + WDS" mode; still nothing worked.
Finally I tried "AP Client" mode, in which (quoting now) "the AP will be a wireless Ethernet adapter transforms any Ethernet-enabled devices to have the wireless function." From the diagram, it would seem that only one device (computer, printer) could be attached. I tried connecting the switch with both computer and printer to the Access Point in this mode, and finally it all works.
Now that it's working, it is doing just what I wanted it to. The new computer can access the internet and share files with the ones downstairs, the downstairs computers can print on the upstairs printer, and so on.
The poor manual and even worse help text really drags this product down. I would have rated it much higher if it hadn't required so much experimentation to get it going.

Click Here to see more reviews about: TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue)



Buy NowGet 33% OFF

Click here for more information about TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue)

Read More...

Saturday, January 28, 2012

D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point Review

D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point
Average Reviews:

(More customer reviews)
I've configured the DAP-1522 as a wireless bridge to a DIR-655 (2.5Ghz). I've got a PS3 and a Satellite DVR connected to two of the four ethernet ports on the DAP-1522. I have configured the 1522 to use WPA2 security as well.
Setup was a little tricky, but it was my fault not the fault of the 1522. If you choose to manually configure the 1522 be sure you follow the directions and connect the 1522 to your computer and with your computer configured to use a static IP address in the 192.168.0/24 subnet. I mistakenly had my computer still trying to use DHCP when connecting to the bridge and it took me a little while to figure out what was wrong. My computer couldn't get an IP address and so Windows kept assigning an address from a different subnet, so I was not able to establish a connection to the DAP-1522's default 192.168.0.50 IP address.
The 1522 works as expected. Performance is very good with a max of 162Mbps through 3 drywall walls (approx 40 ft) to my entertainment center as displayed on the DIR-655 console. I haven't run any local network bandwidth tests to verify the throughput yet, but I can easily stream HD content without blocking between a PS3 and a wired media server. Previously I was using the PS3's internal 802.11g network interface, and HD media was not viewable as it overwhelmed the 11g link.
I did notice that the orientation of the DIR-655 and the DAP-1522 did make a difference in the reported signal strength and data rate as seen from the DIR-655 console. So after you've gotten things to work, don't forget to run some experiments to determine the best position for the devices to get the best performance possible.


Click Here to see more reviews about: D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point


The D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point is designed for users looking to create a wireless network or to connect multiple wired devices to an existing wireless network. Xtreme N Duo is the latest addition to the award-winning Xtreme N product family. Duo means the DAP-1522 works with next generation dual band (2.4 GHz or 5 GHz)* 802.11n wireless devices as well as legacy 802.11g products.
The D-Link DAP-1522 offers dual-band Wireless N connectivity--perfect for HD video streaming (see larger image).

Buy NowGet 30% OFF

Click here for more information about D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point

Read More...

Thursday, December 15, 2011

Cisco WAP2000 Wireless-G Access Point - POE Review

Cisco WAP2000 Wireless-G Access Point - POE
Average Reviews:

(More customer reviews)
I bought this product to provide secure wireless services to our company network. I was pleasantly surprised that it has support for multiple SSIDs with tagged VLAN support (useful for creating a "guest" network for visitors, as well as a separate secure internal network). It supports WPA2-Enterprise, which I'm using together with Windows Server 2003 IAS to allow domain users to be authenticated to the network using their windows login automatically. I was fully expecting problems deploying this somewhat bleading-edge feature, but so far it's worked perfectly (aside from the hassles associated with Microsoft's poor group policy support for WPA2 in XP Pro). The unit has never requiring a restart since I installed it. The physical hardware seems well made also. I'm not using the POE support, because the range on this AP is good enough to allow it to sit in our phone room and cover the entire floor. Overall, this product feels like it's benefited from the Cisco influence, unlike some of Linksys' other recent efforts.

Click Here to see more reviews about: Cisco WAP2000 Wireless-G Access Point - POE

The WAP2000 is a Wireless Access Point ideal for small businesses that want to expand their existing wired networks or create new wireless networks for the workforce or guests. It features RangeBooster technology that is compatible to standard 802.11g but with a range up to two times farther and throughput by up to 35 faster. Unlike ordinary wireless technologies that are hampered by wireless signals that reflect off walls, ceilings, and other objects, RangeBooster uses these multiple signals with two smart receivers at each end (router or access point and client adapter) to boost range and throughput speeds. As a result, a RangeBooster solution reduces or eliminates wireless signal deadspots in offices and other buildings so users can connect to the network in more areas. The WAP2000 comes with 3 dBi antennas for increased power, also helping to extend the range of the Access Point.

Buy Now

Click here for more information about Cisco WAP2000 Wireless-G Access Point - POE

Read More...

Friday, November 18, 2011

Cisco-Linksys WAP54G Wireless-G Access Point Review

Cisco-Linksys WAP54G Wireless-G Access Point
Average Reviews:

(More customer reviews)
I'm using the unit in a REPEATER mode. My house have 3 floors and my router (WRT54G) is located in the basement. I get a signal of 11 Mbps on the sec flr using a centrino powered notebook. The signal would drop to 1 Mbps after some use and the only way to get the signals back is to to reboot the notebook for some reason or go to the first flr. Hence, decided to get this unit and use it as a repeater.
Steps that worked for me are as follows:
01. Disable any security you have on the router (I'm using WEP) and enable SSID broadcast prior to any configuration .
02. Configure the unit using the setup disk and provided the ff:.
---- Provided a different SSID (or you can provide the same SSID) with enabled broadcast.
---- No encription
---- The same transmission channel (Chan 11) as with my router
---- New password
03. Exited program setup. Run browser and connect to the AP interface using the default address [...]
04. Configured the AP in REPEATER MODE placing my router's wireless MAC address as the repeated source signal.
05. Saved the setup.
06. Test if working by removing the wire behind the AP. On your PC/Notebook, open up a command window (START,RUN, type in "cmd" and click [OK]). Type in "ping 192.168.1.245" and press [ENTER]. You should see something like "Reply from 192.168.1.245 bytes=32 time=3ms TTL=225". If you get a "Request timed out." then that means your AP cannot be seen in your network and was not configured successfully go through STEP#1 again.
07. If successful, you need to enable security back (NOTE: At this point, the AP is running stand alone with no wires connected at the back from the router). Since I'm using WEP, connect to the AP using a browser at [...]
Go to wireless security and enable WEP and add the key codes and save your setup.
08. Now enable security back on the router with same key as you have on the AP and save your setup.
09. Test connection again by running STEP#6.
10. Place the AP where you want it to.
11. With a wireless PC/Notebook, scan for wireless networks. You should see the new SSID as well as the old one. Connect to it so that your PC/Notebook would save that information.
12. Connect to your AP, disable SSID broadcast, save setup.
13. Connect to your roter, disable SSID broadcast, save setup.
14. You're done!I placed the WAP54G on the third floor. After all is said and done, my signal was boosted to 45 Mbps (max at 54 Mbps). Works like a charm!!!
NOTE:
- These procedures is specifically if you want to configure your AP as a REPEATER.
- If you configure the AP with WEP security on the get go, you will never be able to get it to work!! I spent hours on this to no avail.
- You can use the same SSID. I used a different one because I want to see what wireless unit I am connecting to when i transfer from floor to floor.
UPDATE 031810
The unit I believe is starting to die on me. My internet access will get cut off all of a sudden and it has been happening frequently (like 4-5 times a week). I have to unplug then plug it back to make it function again. I might upgrade my system to the WRT610N and WAP610N soon.
UPDATE 033110
I decided to get a new WAP54G instead since reading through the WAP610N manual, there is no provision for a REPEATER mode. I placed the old one on the first floor. So now, I have the WRT54G on the basement, my old WAP54G on the first floor and my new WAP54G (with a NETGEAR 5 port switch connected to it) on the 3rd floor. I noticed that with the new one, my web browsing is a lot faster compared to the old one!
UPDATE 041110
So I had the NEW WAP54G for a couple of days since my last update and I still had the same problem of getting disconnected intermittently. I tried shutting down the OLD unit totally but the issue persists with the new unit so it looks like the AP is not the problem. Now, my IPOD TOUCH 32GB 3Gen needed repair and has been out of commission since last Friday 04/09 (bought this last January). And guess what? I have had no problems with my WIFI connection since then (both APs running). I have to see if the replacement Ipod screws up my wifi connection again but I do think I found out the culprit for my WIFI issues.
UPDATE 042510
I got my new replacement Ipod Touch a week ago. My WIFI failure started again but not as frequent. Now, I always turn off the Ipod's Wifi when I'm not using it. I guess I'm stuck with it.
UPDATE 072610
When I got the IOS 4 software update for the Ipod Touch, my WIFI issues disappeared. :)

Click Here to see more reviews about: Cisco-Linksys WAP54G Wireless-G Access Point

The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network. Because both standards are built-in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the new screaming-fast Wireless-G standard as your needs grow.
For more information on the differences between an access point and a router with access point, see the following table: To protect your data and privacy, the Wireless-G access point can encrypt all wireless transmissions. The MAC address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the Web browser-based configuration utility.
Wireless-G is the upcoming 54 Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country--but since they share the same 2.4 GHz radio band, Wireless-G devices can also work with existing 11 Mbps Wireless-B equipment.
Future-proof your wireless network with the Linksys Wireless-G access point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.
The Linksys Wireless-G access point is compatible with Windows 95, 98, Me, NT 4.0, 2000, and XP.


Buy NowGet 14% OFF

Click here for more information about Cisco-Linksys WAP54G Wireless-G Access Point

Read More...