Showing posts with label wrt54g. Show all posts
Showing posts with label wrt54g. Show all posts

Monday, July 9, 2012

Cisco-Linksys WPC54GX4 Wireless-G Notebook Adapter with SRX 400 Review

Cisco-Linksys WPC54GX4 Wireless-G Notebook Adapter with SRX 400
Average Reviews:

(More customer reviews)
I bought the WRT54GX4 yesterday along with a WPC54GX4 PCMIA card for my laptop. My old WRT54G died after 2 3/4 years of service. Linksys will replace the old unit under warranty, but I run a small business and couldn't wait for a replacement. I also found the wireless link between the WRT54G and the WPC54G to be somewhat spotty with the wireless card not catching the router signal all to often so an upgrade was in order anyway.
I installed the WRT54GX4 router with no problem and found that my wired connection had better internet response although I know of no reason why that should be the case. I also tested it with the the laptop with the OLD WPC54G card and the difference was amazing. All of the dead spots in my home were gone, the signal was strong and the transmission rate was inproved. If you want to save a few bucks, but need an improved wireless network, the router will do that even with standard G product in my brief experience.
I next installed the WPC54GX4 card in the PCMIA slot in my laptop. Installation was a breeze. As expected signal strength was strong throughout the house and the data transfer rate was consistantly 240Mbps! To check the range, I put the laptop in the car and concluded I could easily keep connected if I were visiting any of the neighboring houses. The card also picked up a lot of other networks in neighborhood (most of which were not encrypted).
These are not cheap products, but they work and are well worth the money if you want a great wireless network.

Click Here to see more reviews about: Cisco-Linksys WPC54GX4 Wireless-G Notebook Adapter with SRX 400

Linksys Wireless-G Notebook Adapter with SRX 400 Wireless-G for your notebook with SRX technology provides up to 10 times faster wireless network throughput, reduces dead spots, and increases wireless range by up to 3 times.Also fully compatible with all public and private Wireless-G and Wireless-B networks.The Wireless-G Notebook Adapter with SRX400 is the simple way to add or upgrade wireless connectivity in your notebook computer.Just slide it into your notebook's PC Card slot and enjoy high-speed wireless network access while retaining true mobility.The Wireless-G Notebook Adapter with SRX400 combines smart antenna technology with standards-based Wireless-G (802.11g) networking.By overlaying the signals of two Wireless-G compatible radios, the "Multiple In, Multiple Out" (MIMO) technology effectively doubles the data rate.Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area.The robust signal travels farther, maintaining wireless connections up to 3 times farther than standard Wireless-G.With SRX, the farther away you are, the more speed advantage you get, and SRX400 works great with standard Wireless-G and -B equip

Buy NowGet 40% OFF

Click here for more information about Cisco-Linksys WPC54GX4 Wireless-G Notebook Adapter with SRX 400

Read More...

Saturday, July 7, 2012

Cisco-Linksys WRH54G Wireless-G Home Router Review

Cisco-Linksys WRH54G Wireless-G Home Router
Average Reviews:

(More customer reviews)
I installed this router yesterday and have been regretting my decision of buying it ever since. It keeps on dropping connections every 2-3 minutes which drives me crazy. The signal strength is always low even though the router is placed about 3 feet away from my laptop. I tried all possible settings and still couldn't get it to work properly. Previously I owned a D-Link wireless router which worked perfectly, but it stopped working after a year after which I made the mistake of buying this Linksys router. Please make sure you ask other people how this router works for them before you plan on buying it.

Click Here to see more reviews about: Cisco-Linksys WRH54G Wireless-G Home Router



Buy Now

Click here for more information about Cisco-Linksys WRH54G Wireless-G Home Router

Read More...

Monday, July 2, 2012

Cisco-Linksys Refurbished WRT54G2-RM Wireless-G Router Review

Cisco-Linksys Refurbished WRT54G2-RM Wireless-G Router
Average Reviews:

(More customer reviews)
I ordered the WRT54G2 'refurbished' (not from this vendor) because I wanted a replacement for my 801.11b Linksys and the refurbished could be had for a significantly lower price and the product was Linksys certified and came with a 90-day warranty. To my surprise - I expected some glitches - I had close to zero problem installing and operating it. Here is my experience.
- I followed the advice to first run the installation off the provided CD.
- Even though all of my computers are wireless, I followed the advice and connected one of my computer to the router via Ethernet to perform the initial installation.
- After disconnecting the old 801.11b router I used the exact same name for the new network. This allowed for all devices to connect immediately, as soon as the setup completed.
- I made sure that the DHCP server was on.
- The end of setup. All devices, including the wireless printer and the VOIP box connected without a problem.
To my surprise, LELA is not on the CD. It took me longer to find, download and install LELA (Linksys EasyLink Advisor) than to complete the initial setup. I strongly recommend that you do install LELA because, besides the nice graphic of your home network it allows you to restore broken connections without having to turn off the router.
As far as performance is concerned, I believe that I notice a slight but not significant improvement over my old 801.11b router. We have about one dozen connected devices: desktops, laptops, a PS3, a PSP, VOIP, printer and, with all on, everything worked just fine. With the router in the basement, I had '3-bars' on a computer 15-20 feet from the router. Surprisingly, I had 3 bars on the first and on the second floor as well and I had the same 3 bars outside, about 90 feet from the router, by the pool. The old router gave me 4 bars in the basement but only 3 bars in the rest of the house and only 1 or 2 bars with intermittent disconnections outside the house.
With LELA running, I was able to quickly fix the the few disconnections that occurred over a several-days period without having to power off the router. This was better than my old 801.11b that had me power off the cable modem and the router whenever the connection to the Internet stopped working. Disconnections do occur after computers are set to 'sleep' but recovery is usually quick when the computer wakes up. I never had issues with non-computer devices such as printer, PS3 or the VOIP box.
Overall, I am very happy with my new router so far. It's probably as good as any 801.11g device can get.
___________________________________________
DNS issues update:
With DHCP, strangely, after a few months of operation, the router began to 'forget' about passing DNS queries to the outside server. It KNOWS about the 3 DNS servers the ISP has but, out of the blue I get 'resolving host' errors and LELA claims that I'm no longer connected to the Internet. This while VoIP, connected to the same router works without a problem and so do the PS3 and my kids computers.
The initial 'solution' was to power off the router and then power it back on.
I have no idea why this was happening yet but, this is my quick solution: on the 'Network and Sharing Center' click on your connection 'View status' then 'Properties', highlight 'Internet Protocol Version 4...', 'Properties', 'Advanced', from the DNS tab click on 'Add...' and enter all the DNS servers that your router has listed under 'Status'.
This eliminated all problems.

Click Here to see more reviews about: Cisco-Linksys Refurbished WRT54G2-RM Wireless-G Router



Buy NowGet 13% OFF

Click here for more information about Cisco-Linksys Refurbished WRT54G2-RM Wireless-G Router

Read More...

Monday, April 16, 2012

Linksys WRK54G 4-Port Wireless-G Broadband Router Review

Linksys WRK54G 4-Port Wireless-G Broadband Router
Average Reviews:

(More customer reviews)
I hate this device with every fiber of my being. Clearly the worst computer related device ever created since the beginning of computer history and quite possibly the worst consumer product of all time. Yup, it's that bad.
Every morning when I get up, I have to reset this thing, because it hardly ever makes it through the night holding a connection. All sorts of things make it lose connection. Connecting to multiple computers makes it lose connection. Long idle periods make it lose connection. Ever so slight power blinks make it lose connection. And seemingly, presence of oxygen makes it lose connection.
The worst thing you can do is what I did...set this router up with stairs between your primary computer and the router. Or, it could be the best, depending on the level of exercise you require in your life. Last year, I was able to participate in a 10K run, thanks in large part to my involuntary stair training regimen.
Honestly, it got so bad that I installed a Handy Switch Wireless Light Switch; one of those wireless switches that you can use to control lights or whatever that plug into the wall. Now, when it locks up (every 13.6 minutes), I reach under the end table where I installed the switch and reset it. (Thanks, Billy Mays!) This has made living with the WRK54G a little more tolerable, but has added another $15 in operating costs that could have been used to buy a REAL router.
Every so often, I try again to run encryption on the WRK54G. Everything works as well as can be expected for a few months, then the WRK54G suddenly refuses to allow anything to connect, even with the correct passcode. Nothing makes any difference, even trying another computer still results in no connection with the router. At that point the only thing to do is disable encryption entirely or stop using wireless. After about a week, I can once again enable encryption, with the EXACT same password, and magically, all computers hook to it just fine. WHY????
Rarely do I take so adamant a stance in recommending against a product, but Linksys has destroyed my enjoyment of computing, so I will be very honest about this. If you're thinking about the WRK54G, instead, try to find a Carrot Top DVD (such as Chairman of the Board) and put that in your DVD player on Repeat. Turn the volume up all the way and tape your eyes open. You'll come out far cheaper and still not be as aggrivated as you would buying the WRK54G.


Click Here to see more reviews about: Linksys WRK54G 4-Port Wireless-G Broadband Router



Buy Now

Click here for more information about Linksys WRK54G 4-Port Wireless-G Broadband Router

Read More...

Friday, March 9, 2012

Linksys WRT54G Wireless-G 802.11g Broadband Router Review

Linksys WRT54G Wireless-G 802.11g Broadband Router
Average Reviews:

(More customer reviews)
It's a great router with easy to use configuration. This is my third one and I have no complaints. Linksys is by far the best home router you can get.

Click Here to see more reviews about: Linksys WRT54G Wireless-G 802.11g Broadband Router



Buy Now

Click here for more information about Linksys WRT54G Wireless-G 802.11g Broadband Router

Read More...

Sunday, January 22, 2012

Cisco-Linksys WMP54GS Wireless-G PCI Card with SpeedBooster Review

Cisco-Linksys WMP54GS Wireless-G PCI Card with SpeedBooster
Average Reviews:

(More customer reviews)
The good? Wireless speeds are in excess of the 802.11g spec, so I am getting 100-110Mbps (12.5-13.5 MBps) from the basement to the living room easily. Once the initial horror of setup was over, I've been happily connected ever since. And you can't beat the price: Linksys gear is dropping in price, likely due to a ramp-up of pre-N gear on the horizon. (That's the new 802.11n standard which promises 6x the g-rate, and pre-N Belkin gear is delivering triple the speeds, so 150Mbps, or nearly 19 MBps).
The bad? Customer support, or lack thereof. I had a problem with the client not seeing the router. The *real* problem was the firewall on the basement machine. However, mention the words "Workgroup" or "file and printer sharing" to a Live Chat Specialist and watch how fast they come back with "we don't support configuring Windows" and a link to a knowledgebase article that will not give you a step-by-step diagnostic.
That's a shame, because a troubleshooting map would come in real handy. I fixed the problem myself -- I usually do with rare exception -- but for the non-IT professional, I fear for you. It's Belkin or Netgear for me next time.
And even more: the DHCP server on these routers are apparently very flaky. I could never get mine to give up an IP address to my WMP54GS card, so in the ened I configured it for a static IP and was connected. Woe to the inexperienced customer who tries to get an IP from one of these automatically. This issue is known throughout the Internet, but good luck trying to get Linksys to admit the problem and fix it.
The ugly? Try installing it. IF you manage to see your router on the first shot, your karma is perfect and heaven awaits you. Sinners like myself are forced to install the Linksys drivers only after the failed promise of Wireless Zero Configuration fails. Yes, you'll be switching between the Windows config and Linksys config a few times until you get it right. My suggestion would be to ensure you can see the router first (channel selection being the biggest 'gotcha' here), then worry about encryption and such.
Also, don't be surprised if the DHCP server on the WRT54GS router doesn't give you an IP address. It's a known issue to the outside world, which is waiting for Linksys to admit it and fix it. Configuring your WMP54GS with a static IP will get you fully connected in every case.
I have companion reviews for the WRT54GS and WUSB11, also Linksys gear. They won't be very flattering, either, but it's XMas time, and readers should not be giving bad gifts.
Fred

Click Here to see more reviews about: Cisco-Linksys WMP54GS Wireless-G PCI Card with SpeedBooster

The Linksys Wireless-G PCI Card with SpeedBooster installs in most desktop and tower PCs, and lets you put your computer almost anywhere in the building without the cost and hassle of running network cables.Now you don't have to drill holes in your walls and climb through the attic or cellar to get connected to the network.Once you're connected, you can keep in touch with your e-mail, access the Internet, use instant messaging to chat with friends, and share files and other resources such as printers and network storage with other computers on the network.

Buy Now

Click here for more information about Cisco-Linksys WMP54GS Wireless-G PCI Card with SpeedBooster

Read More...

Sunday, January 8, 2012

Cisco-Linksys WRT54GS Wireless-G Broadband Router with SpeedBooster Review

Cisco-Linksys WRT54GS Wireless-G Broadband Router with SpeedBooster
Average Reviews:

(More customer reviews)
I love the WRT54G which I have bought for my home a year ago. I am a college student and just bought another one since I moved off campus. At first, I had trouble deciding between the WRT54G or the WRT54GS( with speedbooster). From first glance, the speedbooster tag seems enticing since everybody wants fast wireless transfers that would hopefully come close to wired networks. After reading some reviews and speaking to my best friend who works for Linksys , the only difference between the WRT54G and the WRT54GS is the flash and Ram memory. It is an upgrade from 4mb to 8mb for the flash, and 16mb to 32mb for the Ram. Basically you wont surf the internet any faster. The benefits of this is just transferring files from one computer to another will increase. For those who just want to share an internet connection, stick with the WRT54G and save the extra 20 bucks for a 30 pack of beer. If you like to transfer files between computers, spend the extra dough.

Click Here to see more reviews about: Cisco-Linksys WRT54GS Wireless-G Broadband Router with SpeedBooster

The Wireless-G Broadband Router with SpeedBooster is really three devices in one box. First, theres the Wireless Access Point, which lets you connect Wireless-G, Wireless-B, and other performance-enhanced SpeedBooster devices to the network. Theres also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together. Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection. The Wireless-G Broadband Router with SpeedBooster incorporates the next generation of Wireless-G (802.11g) networking. SpeedBooster technology is a compatible add-on to standard Wireless-G, which increases real-world wireless network performance by up to 35. Unlike other speed-enhancing technologies, SpeedBooster is fully 802.11 compliant, and a good neighbor to other wireless devices and technologies, using a single 2.4GHz channel as specified by the official wireless standard. And, unlike other technologies, with SpeedBooster youll see an overall speed improvement even when running a mixed network of SpeedBooster and regular Wireless-G devices.

Buy Now

Click here for more information about Cisco-Linksys WRT54GS Wireless-G Broadband Router with SpeedBooster

Read More...

Tuesday, January 3, 2012

TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue) Review

TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue)
Average Reviews:

(More customer reviews)
Upgrading finally from my B router. Probably the last one in the neighborhood to do so.
There are three versions of the TEW-432BRP (the outer casings look slightly different). They're roughly labelled A, B, and C. I wound up with the C one. Its the best G router i've ever seen, for a few reasons:
1. "Easy CD" actually worked and led me through a wizard that had me running in under 5 minutes. It was even intelligent enough to figure out that my cable company's router needed a reset.
2. When you go into the firmware, there are some interesting and unusual settings you can tweak. It has the usual things like 'dont broadcast ssid' and all the rest of it. But it also had unusual settings that I'd never seen before, like the ability to set the output of its signal at "full power" or "half power" or "quarter" or "eigth" or "minimum". Seemed like an interesting option; I usually sit 10 feet from it, maybe I can reduce the microwaves bombarding my brain? I tried it on the various levels and did throughput tests. Interestingly, it was at "quarter power" that I had the fastest throughput. I dont know why, but I can live with that. I was glad to have that option to reduce the output signal's power level in the router, though.
3. Excellent transmission spread, strong signal, and fast. I know the bottleneck is supposed to be the dsl/cable conneciton itself, but I would swear my browsing is faster and snappier now. And my connection speed to my local network drive improved five-fold (which was why I got a g router in the first place).
Its a great deal under twenty-five on sale.

Click Here to see more reviews about: TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue)

The 54Mbps Wireless G Router offers a complete wireless solution that allows you to share files, an Internet connection, or network resource while protecting your network using enhanced security features. Simply plug your workstations and your broadband modem into the Wireless G router, and configure your broadband connection using its built-in Web Interface. Use the Virtual Server feature to configure any workstation as a Web Server or FTP server easily, allowing users to view files from the Internet. You can also protect your Wireless LAN using 64/128-bit WEP encryption or industry standard WPA-PSK with TKIP or AES algorithms. Increase security by enabling MAC, IP, or Protocol Filtering as well as setting Firewall Rules to limit Internet Access or block malicious intruders from accessing your network.

Buy NowGet 50% OFF

Click here for more information about TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue)

Read More...

Friday, December 16, 2011

Belkin Wireless G Plus Router Review

Belkin Wireless G Plus Router
Average Reviews:

(More customer reviews)
The Belkin High-Speed Wrls. G Router works excellent as a cable modem wireless router, but not as a DSL wireless router. I have DSL, on my office and it doesn't work properly, I cannot expereience high speed internet because the message that shows up on the wireless computer was "Low Connection" no matter where was the router ubicated, I had to buy a Netgear one and was perfect. However I put the Belkin wireless router in my house where I have Cable modem connection and works awesome! The laptops computers works twice as fast and properly when they go online, even from a further distance than the Linksys wireless router I had before without loose the connection. I have discover that the Belkin wireless Router is designed specially for cable modem connection but have technical problems with the DSL Protocols from providing companies, so in clear words, this router is perfect for cable modem connections but a nightmare for DSL.

Click Here to see more reviews about: Belkin Wireless G Plus Router



Buy Now

Click here for more information about Belkin Wireless G Plus Router

Read More...

Monday, November 28, 2011

Wireless G Access Point w/ P.O.E. and Rangebooster. Review

Wireless G Access Point w/ P.O.E. and Rangebooster.
Average Reviews:

(More customer reviews)
I needed to wirelessly network a Brooklyn Brownstone approximately 45' long by 100 feet tall 4 floors. Initially started with the Netgear
RANGEMAX WIRELESS ROUTER Netgear RangeMax Wireless Router (WPN824)because of the advertised (last year Sept)
-MIMO (Multi-In, Multi-Out) technology boosts network performance with up to 10x the speed and 10x the coverage of Wireless-G
Result: Signal traveled straight up to the upper floor without a problem, but could not reach the rooms from the middle to the front of the house 2nd ,3rd ,or 4th floors (Comcast cable modem placed on the second floor back). Mysteriously connections would drop without reason from time to time. Theory Comcast equipment was causing that problem, too, wireless phone and fax interference too being the possible gremlins.

Phase 2-Linksys Wireless-G Range Expander WRE54G
used 3 Linksys Wireless G Extenders to act as repeaters on the upper floors. Could only manage to get a strong signal partially to the second floor but signal was intermittent. Could only link two extenders but the second, again dropped the signal intermittently and the dreaded `limited or no connectivity' message began. Observation proved these messages materialized while roaming-connecting to the second or third node (first node being Netgear WPN824). Though the signal was seen (in some cases very good) Netgear had a time issuing IP addresses past the first node.
Phase 3, after spending 1 whole day surfing the net for info. I decided to start anew....after much comparing and no reviews to go by. I decided on the Linksys WAP 200 because of its versatility and advertised signal strength - it could be an accesspoint, a repeater, or a bridge...and because I had the G extenders from Linksys that I became familiar with....
200AP2 Linsys WAP200
Setup 1- Continue the Netgear as the Ethernet to cable box, wireless access point, with DHCP server, using the 2 200's as repeaters. The main problem, after becoming familiar with the WAP200 was still the `Limited or no connectivity' message. I `trial and erred' the settings ,I observed a correlation between RIP and the error msg.I also noted the msg occurring much more on my older lap (XP home), vs my girl friends newer (XP) lap.
Setup 2- using the Netgear as the DHCP server, Ethernet to cable box SWITCH. One of the 200's would account for a wireless access point (located on the second floor, 2 ft from the Netgear), the other a 200 a Repeater (3rd floor hall...I added a Hawking Technology's HAI15SC,Hawking HAI15SC 15dBi Hi-Gain Directional Corner Antenna 2.4GHz Hi-Gain Wireless Corner Antenna, boosts your wireless signal strength from 2dBi (standard) to 15dBi to the second floor 200...didn't think I needed it). This configuration covered the whole house, there were a few low signal readings at the extreme ends on the 4th floor 3ft from the front window , which I intended to eliminate with the Linksys G Extender.
Which brings me to the only concern- AP Mode gives you the opportunity to use the 200 in either 1 of 3 modes
AP Mode Screen
Use this screen to configure the Access Point mode. The three available modes are Access Point, Wireless Repeater, and Wireless Bridge.
The 200 that was used as the wireless access point needed the MAC address of the 200 used as a Repeater (in Repeater mode-- max 3 MAC addresses). Adding the address of the second wap200 (as Repeater) was'nt an issue, all worked perfectly. When I added the MAC addresses of the G Extenders `Limited connectivity' messages again appeared, I tried various combo's including changing the order but always a problem...perhaps the repeaters have to be legit repeaters or WAP200's...anywho I found this interesting and will be taking the 3 extenders back to Best Buy
Conclusions-
overall I found the Linksys WAP 200 a really good product. I don't believe you have to know the nuts and bolts about networking to get the WAP200 up and running. The documentation will not be of help to a newbie, but if you google your concerns you may learn a thing or two. $124 is a really good price for the endless possibilities one could use this 3-in-1 wireless network product......btw I speed tested the connections, watched video (google video, Youtube) while roaming around the house and it never dropped a signal.
it is now 11-28-2008 and this product has been running non stop since the original review..
asH


Click Here to see more reviews about: Wireless G Access Point w/ P.O.E. and Rangebooster.



Buy NowGet 12% OFF

Click here for more information about Wireless G Access Point w/ P.O.E. and Rangebooster.

Read More...

Friday, November 18, 2011

Cisco-Linksys WAP54G Wireless-G Access Point Review

Cisco-Linksys WAP54G Wireless-G Access Point
Average Reviews:

(More customer reviews)
I'm using the unit in a REPEATER mode. My house have 3 floors and my router (WRT54G) is located in the basement. I get a signal of 11 Mbps on the sec flr using a centrino powered notebook. The signal would drop to 1 Mbps after some use and the only way to get the signals back is to to reboot the notebook for some reason or go to the first flr. Hence, decided to get this unit and use it as a repeater.
Steps that worked for me are as follows:
01. Disable any security you have on the router (I'm using WEP) and enable SSID broadcast prior to any configuration .
02. Configure the unit using the setup disk and provided the ff:.
---- Provided a different SSID (or you can provide the same SSID) with enabled broadcast.
---- No encription
---- The same transmission channel (Chan 11) as with my router
---- New password
03. Exited program setup. Run browser and connect to the AP interface using the default address [...]
04. Configured the AP in REPEATER MODE placing my router's wireless MAC address as the repeated source signal.
05. Saved the setup.
06. Test if working by removing the wire behind the AP. On your PC/Notebook, open up a command window (START,RUN, type in "cmd" and click [OK]). Type in "ping 192.168.1.245" and press [ENTER]. You should see something like "Reply from 192.168.1.245 bytes=32 time=3ms TTL=225". If you get a "Request timed out." then that means your AP cannot be seen in your network and was not configured successfully go through STEP#1 again.
07. If successful, you need to enable security back (NOTE: At this point, the AP is running stand alone with no wires connected at the back from the router). Since I'm using WEP, connect to the AP using a browser at [...]
Go to wireless security and enable WEP and add the key codes and save your setup.
08. Now enable security back on the router with same key as you have on the AP and save your setup.
09. Test connection again by running STEP#6.
10. Place the AP where you want it to.
11. With a wireless PC/Notebook, scan for wireless networks. You should see the new SSID as well as the old one. Connect to it so that your PC/Notebook would save that information.
12. Connect to your AP, disable SSID broadcast, save setup.
13. Connect to your roter, disable SSID broadcast, save setup.
14. You're done!I placed the WAP54G on the third floor. After all is said and done, my signal was boosted to 45 Mbps (max at 54 Mbps). Works like a charm!!!
NOTE:
- These procedures is specifically if you want to configure your AP as a REPEATER.
- If you configure the AP with WEP security on the get go, you will never be able to get it to work!! I spent hours on this to no avail.
- You can use the same SSID. I used a different one because I want to see what wireless unit I am connecting to when i transfer from floor to floor.
UPDATE 031810
The unit I believe is starting to die on me. My internet access will get cut off all of a sudden and it has been happening frequently (like 4-5 times a week). I have to unplug then plug it back to make it function again. I might upgrade my system to the WRT610N and WAP610N soon.
UPDATE 033110
I decided to get a new WAP54G instead since reading through the WAP610N manual, there is no provision for a REPEATER mode. I placed the old one on the first floor. So now, I have the WRT54G on the basement, my old WAP54G on the first floor and my new WAP54G (with a NETGEAR 5 port switch connected to it) on the 3rd floor. I noticed that with the new one, my web browsing is a lot faster compared to the old one!
UPDATE 041110
So I had the NEW WAP54G for a couple of days since my last update and I still had the same problem of getting disconnected intermittently. I tried shutting down the OLD unit totally but the issue persists with the new unit so it looks like the AP is not the problem. Now, my IPOD TOUCH 32GB 3Gen needed repair and has been out of commission since last Friday 04/09 (bought this last January). And guess what? I have had no problems with my WIFI connection since then (both APs running). I have to see if the replacement Ipod screws up my wifi connection again but I do think I found out the culprit for my WIFI issues.
UPDATE 042510
I got my new replacement Ipod Touch a week ago. My WIFI failure started again but not as frequent. Now, I always turn off the Ipod's Wifi when I'm not using it. I guess I'm stuck with it.
UPDATE 072610
When I got the IOS 4 software update for the Ipod Touch, my WIFI issues disappeared. :)

Click Here to see more reviews about: Cisco-Linksys WAP54G Wireless-G Access Point

The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network. Because both standards are built-in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the new screaming-fast Wireless-G standard as your needs grow.
For more information on the differences between an access point and a router with access point, see the following table: To protect your data and privacy, the Wireless-G access point can encrypt all wireless transmissions. The MAC address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the Web browser-based configuration utility.
Wireless-G is the upcoming 54 Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country--but since they share the same 2.4 GHz radio band, Wireless-G devices can also work with existing 11 Mbps Wireless-B equipment.
Future-proof your wireless network with the Linksys Wireless-G access point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.
The Linksys Wireless-G access point is compatible with Windows 95, 98, Me, NT 4.0, 2000, and XP.


Buy NowGet 14% OFF

Click here for more information about Cisco-Linksys WAP54G Wireless-G Access Point

Read More...

Monday, November 14, 2011

Cisco-Linksys WRT54GX Wireless-G Broadband Router with SRX Review

Cisco-Linksys WRT54GX Wireless-G Broadband Router with SRX
Average Reviews:

(More customer reviews)
I live in a two story house, with plenty of walls in between. This unit replaced 3 11a Access Points. I can now get 108mbps anywhere in my house with almost 100% signal strenght (my laptop is using the WPC54GX card).
The web interface is very straightforward and looks professional. I would buy it again.

Click Here to see more reviews about: Cisco-Linksys WRT54GX Wireless-G Broadband Router with SRX

Now you can enjoy wireless home-network access in those hard-to-reach rooms and--simultaneously--get faster networking and Internet performance, too. The WRT54GX Wireless-G broadband router from Linksys uses the company's advanced SRX (Speed and Range eXpansion) technology to enhance the speed and the reach of a Wireless-G (802.11g) network. The WRT54GX can provide faster wireless network throughput, reduce dead spots, and increase wireless range over standard Wireless-G networks. The handy WRT54GX serves as an Internet-sharing router, a four-port 10/100 switch, and an SRX-enhanced Wireless-G access point all at once. Relative to standard 80 2.11g technology, a network using all SRX products can extend network reach up to three times as far and boost wireless network speed by up to eight times. (Actual throughput, speed, and range depend on a host of factors, from building materials to network traffic and distance from the router.) The device is Wi-Fi-certified and backward compatible with 802.11b (Wireless-B), 802.11g (Wireless-G) and, of course, other Linksys SRX products. Mixed wireless environments such as networks containing SRX, Wireless-B, and Wireless-G products can operate each client at its own maximum data rate. SRX products maintain their higher speed and range, providing the throughput and quality of service to deliver applications such as VoIP (Internet telephony) and video streaming. SRX is based on MIMO (multiple-in, multiple-out) technology, a key component in the upcoming Wireless-N (802.11n) standard. To improve range and speed, MIMO uses two radios and three antennas on a wireless router or client adapter. To enhance data protection and privacy, the router can encode all wireless trans missions with WPA (Wireless Protection Access). Its powerful Stateful Packet Inspection (SPI) firewall enhances protection to all the wired and wireless PCs against intruders and most known Internet attacks while also supporting VPN passthrough. Configuration is easy using a Web-browser-based configuration utility. What's in the Box Wireless-G broadband router, a setup CD-ROM with Symantec Internet Security, a u ser's guide on CD-ROM, an AC power adapter, an Ethernet network cable, a quick-i nstallation guide, and a registration card.


Buy Now

Click here for more information about Cisco-Linksys WRT54GX Wireless-G Broadband Router with SRX

Read More...

Monday, October 31, 2011

Cisco-Linksys Compact Wireless-G Broadband Router WRT54GC Review

Cisco-Linksys Compact Wireless-G Broadband Router WRT54GC
Average Reviews:

(More customer reviews)
I was thinking of purchasing an Airport Express module, but purchased this instead. It has a lower price, similar size, and a built-in 4-port switch which won me over. It was easy to configure using Safari and it's built-in setup wizard (no software needs to be installed). I got a strong signal on my Powerbook (4 bars on the Airport signal).
It offers WEP, WPA, and WPA2 security. Plus you can define specific times of day the WiFi is active as well as specific computers which can access your network (handy when you are at work and want to make sure no one is piggybacking your WiFi signal). I also connected my PS2 and Vonage VoIP module and everything works flawlessly. I'm a typical Mac user who is used to easy setup and good looking equipment and I'm pleasantly surprised at this Linysys product!

Click Here to see more reviews about: Cisco-Linksys Compact Wireless-G Broadband Router WRT54GC

Compact all-in-one Internet-sharing Router, 4-port Switch, and 54Mbps Wireless-G Access Point. Almost 5 times faster than 802.11b, but can also interoperate with any 802.11b device (at 11Mbps).The Linksys Compact Wireless-G Broadband Router is really three devices in one small box.There's the Wireless Access Point, which lets you connect both screaming fast Wireless-G (802.11g at 54Mbps) and Wireless-B (802.11b at 11Mbps) devices to the network.There's also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together.Connect four PCs directly, or attach more hubs and switches to create as big a network as you need.Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection.Once your computers are connected to the Router and the Internet, they can communicate with each other too, sharing a printer, digital music, picture and document files, and multi-player or on-line games.To protect your data and privacy, the Wireless-G Broadband Router can encode all wireless transmissions with WEP or industrial-strength WPA Personal encryption.The Router can serve as a DHCP Server, has a powerful SPI firewall to protect your PCs against intruders and most known Internet attacks, and supports VPN pass-through.Configuration is a snap with the web browser-based configuration utility.And the tiny form factor fits any home or desktop.With the Linksys Compact Wireless-G Broadband Router at the center of your home or office network, you can share a high-speed Internet connection, files, printers, and multi-player games with the flexibility, speed, and security you need!

Buy Now

Click here for more information about Cisco-Linksys Compact Wireless-G Broadband Router WRT54GC

Read More...

Thursday, October 27, 2011

Cisco-Linksys WRT54G Wireless-G Router Review

Cisco-Linksys WRT54G Wireless-G Router
Average Reviews:

(More customer reviews)
The Linksys WRT54G and WRT54GS routers have been the number one most popular wireless router devices available for the past few years. So this begs the question why Cisco would snatch defeat from the jaws of victory by needlessly changing an almost perfect product. The fact is that versions 1 -4 of the G and the GS (with Speedboost) versions of this router were fantastic. Those earlier routers run a flexible and powerful Linux based firmware that has been perfected for the past few years a numerous updates and tweaks. However, the earlier WRT54G product has now been replaced with a less powerful wireless product (version 5) that has had its onboard flash RAM chopped in half from 4MB to 2MB and its system RAM cut from 16MB to 8MB. Instead of the flexible, reliable and powerful Linux firmware the new WRT54G version 5 routers run the licensed VxWorks firmware instead. There is nothing wrong with using VxWorks and over time Cisco will probably work out the bugs but for now the newest wireless routers are not reliable.
Why would Cisco do this to its most popular Linksys brand of wireless routers ? Apparently it might be a case where the first four versions were too flexible for their own good. The open source Linux firmware with the large amount of flash and system memory was attractive to many third party independent software developers that were turning the WRT54G and GS routers into powerhouse micro Linux wireless computers with a functionality approaching and often surpassing the $600+ wireless routers that Cisco sells. There might also have been an excess number of product warranty returns for the WRT54G routers due to so many people flashing them with non-Linksys third party firmware that sometimes can "brick" a router or make it unusable.
Your solution is to either look for a previous version of the "WRT54G" router before version 5 or purchase the "WRT54GS" (SpeedBooster) version 4 which as of the posting of this review is still available in the stores and it still uses the popular Linux firmware. You will pay $20 more for the GS model but compared to the version 5 of the G model it is worth the extra money. The GS models 1 - 4 are all good with GS version 3.0 and 3.1 reportedly being the most flexible of the bunch and GS 4.0 being the latest. If you want to use third party firmware you may want the GS versions 2.0 - 3.0/3.1 since they have the most flash RAM while still having newer Broadcom based processors. Finally, if you do plan to flash your WRT54G with third party firmware the ones before version 4 of the WRT54G wireless routers are supposed to be easier to work with.
How do you find which version you are looking for? Look on the bottom of the box near the scan tag for the serial number of the router. For the WRT54G wireless routers look for CDFA or a CDF9 or lower (CDF8, CDF7, 6, etc.) Any serial number with CDF5 (v2.0) through CDF9 (v3.1) are the most flexible for use with third party firmware. Unless you want to use a more risky third party firmware I recommend that you read the manual instructions on how to carefully flash these older router models with a newer Linksys firmware which is designed for that specific router version. The latest official Linksys firmware for each specific version of router can be obtained from the Linksys support site. Completely avoid the WRT54G routers with the "CDFB" (v5.0) serial numbers since those are the buggy VxWorks versions. You could also simply purchase the WRT54GS (v4.0) routers that say Speedboost on the box. You will see the "CGN6" serial numbers on the box and as of this review these were still using Linux firmware with software based SpeedBoost enhancements but the RAM and hardware inside seems to be essentially the same as the older WRT54G (v4.0) version 4. The WRT54GS v2.0 (CGN3) through v3.0 (CGN5) are also good and will have more flash RAM available if you want use the wireless router with third party firmware. I would like to note that flashing the router with firmware other than an official Linksys releases obtained from the Linksys support web site will void the warranty and can result in a "bricked" or damaged router.

PROS: The most popular, flexible, reliable and highly rated wireless router on the market before the WRT54G version 5. Previous versions could be flashed with powerful third party firmware. The latest WRT54GS v4.0 routers can still be purchased and except for the SpeedBoost software enhancement (including a different version of Linux based firmware) they are essentially the same as older WRT54G v4.0 routers.
CONS: The latest version 5 has less Flash and System RAM and uses a buggy non-Linux based firmware. There is no rumor of this yet but in the near future Cisco might also release a newer WRT54GS router non-Linux based router (WRT54GS v5.0 ???)
CONCLUSION: With all the changes to the memory and the firmware this latest G model is really a very different product and Cisco should have changed the model number altogether. Neverless, I hope that Cisco works out the bugs in their current version so that the G version can at least partially return to its glory days. There are rumors that a still newer model popular Linux based router might be re-released with the model name of WRT54GL but until that happens we can still purchase a very good WRT54GS v4.0 Speedbooster model.
THE BOTTOM LINE: I give five stars to the older WRT54G models and five stars to the latest WRT54GS model. But I give only one star for the newest WRT54G version 5 which averages the score to only 2.5 stars (rounded down to 2 stars since v5.0 is the newest and most abundant WRT54G model that you can find in the stores).

Click Here to see more reviews about: Cisco-Linksys WRT54G Wireless-G Router

The Linksys Wireless-G broadband router is really three devices in one box. First, it's a wireless access point, which lets you connect Wireless-G or Wireless-B devices to the network. There's also a built-in four-port full-duplex 10/100 switch to connect your wired-Ethernet devices. Connect four PCs directly, or daisy-chain out to more hubs and switches to create as big a network as you need. Finally, the router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection.
To protect your data and privacy, the Wireless-G broadband router can encrypt all wireless transmissions, and it supports the industrial-strength wireless security of 802.1x authentication and authorization. The router can serve as a DHCP server, has NAT technology to protect against Internet intruders, supports VPN pass-through, and can be configured to filter internal users' access to the Internet. Configuration is a snap with the Web browser-based configuration utility.
With the Linksys Wireless-G broadband router at the center of your home or office network, you can share a high-speed Internet connection, files, printers, and multiplayer games with the flexibility, speed, and security you need!
Wireless-G is the 54 Mbps wireless networking standard that's more than four times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country. But since they share the same 2.4 GHz radio band, Wireless-G devices can also interoperate with existing 11 Mbps Wireless-B equipment.
Because both standards are built-in, you can protect your investment in existing 802.11b infrastructure, and migrate to the new screaming-fast Wireless-G standard as your needs grow.
For more information on the differences between an access point and a router with access point, see the following table:

Buy Now

Click here for more information about Cisco-Linksys WRT54G Wireless-G Router

Read More...

Wednesday, October 26, 2011

Hawking HAI7SIP HiGain 7dBi Indoor Omni Directional Antenna Review

Hawking HAI7SIP HiGain 7dBi Indoor Omni Directional Antenna
Average Reviews:

(More customer reviews)
I got this this antenna to attatch to my pcmcia orinoco wifi card (a MC->RP-SMA adapter, obtained off ebay, was required) in my laptop. The antenna cost me $30 after mail in rebates at CompUSA.
Testing it right next to my router, signal strength with:
No antenna: ~32db
the HAI7SIP: ~41db
for contrast, a (highly directional) Cantenna: ~55db
I then walked upstairs to my bedroom (the router is in my living room), closed the door and ran the tests again. This time signal strength with:
No antenna: ~7db
the HAI7SIP: ~22db
the Cantenna: ~38db
I want to comment that when I went to store the antenna, the way I did it was by bending down the the "blade" on to the base then wrapping the cord around the blade. On whim I plugged it back into my wifi card in this state, and I found that doing so increased my range tremendously. My signal about 10 feer from my router jumped from about ~41db to about ~54db. This is amazing and I hope it will act this way consistently.
I just want to make one more comment that the build quality on HAI7SIP is first class. The antenna feels quite solid which is always a plus.
So overall, I'm satisfied with the HAI7SP, and I think it was worth the money as it did increase my singal at rather distant ranges by a good bit, but at the same time I don't think it's anywhere near amazing, and I certainly don't think the 3x range increase advertised on the box could be achieved in real life conditions. Rather I feel it's an average buy, and thus I rated it 3 stars.

Click Here to see more reviews about: Hawking HAI7SIP HiGain 7dBi Indoor Omni Directional Antenna



Buy NowGet 38% OFF

Click here for more information about Hawking HAI7SIP HiGain 7dBi Indoor Omni Directional Antenna

Read More...

Monday, October 3, 2011

Linksys Wireless-G Broadband Router WRT54G - Wireless router - 4-port switch - 802.11b/g - desktop Review

Linksys Wireless-G Broadband Router WRT54G - Wireless router - 4-port switch - 802.11b/g - desktop
Average Reviews:

(More customer reviews)
Works well as promised. Easy setup for intermediate users and above.
Timed the upgrade with upgrade to vista and have found it works well. I Did not flash the firmware no need for my application. Oh minor inconveince older 2.4ghz phone interupts signal.

Click Here to see more reviews about: Linksys Wireless-G Broadband Router WRT54G - Wireless router - 4-port switch - 802.11b/g - desktop



Buy Now

Click here for more information about Linksys Wireless-G Broadband Router WRT54G - Wireless router - 4-port switch - 802.11b/g - desktop

Read More...