Showing posts with label avoid. Show all posts
Showing posts with label avoid. Show all posts

Thursday, May 10, 2012

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE Review

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE
Average Reviews:

(More customer reviews)
I read the prior reviews but went ahead and bought this on the advise of a friend who intalls wireless networks for a living and he uses this access point a lot. I am completly pleased with this Linksys product. When you plan to use it for what it is designed for, an Access point, and don't have any notions that it is anything more, it chugs right along. I ran CAT 6 cable, (keeping under 300 meters total length) and used the AC adaptor supplied to power the unit. It is ran off a Linksys wireless-N router and a 5 station Linksys Workgroup hub. I mounted it in the downstairs coat closet behind my TV room and turned on my laptop, found it, and connected. I then entered it's webbased setup utility and configured it to my liking, (WPA2 security to match my wireless router) and I works like a charm. I am writing this review on my laptop, in my bedroom, where my upstairs router alone could never reach. I now have full bar service all over my complete property, inside and out. It is just what was needed.

Click Here to see more reviews about: Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Linksys Business Series WAP4400N Wireless-N Access Point answers your growing business' need for access, speed and security. Using the very latest wireless networking technology, Wireless-N (draft 802.11n), Multiple In, Multiple Out (MIMO) technology multiplies the effective data rate by overlaying the signals of multiple radios. The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point easy to install. You can mount the Access Point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Operating Channels -11 North America, 13 Most of Europe (ETSI and Japan) Receiver Sensitivity -11.n 300Mbps at -69dbM, 11.g 54Mbps at -73dBm, 11.b 11Mbps at -88dBM Security -WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Linux Operating System System Requirements -802.11b, 802.11g, 802.11n Wireless Adapter With TCP/IP Protocol Installed Per PC, Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE & Web-Based Configuration Java-Enabled Web Browser Dimensions -Width 7.80 x Height 5.16 x Depth 7.80-inches (198 x 131 x 198 mm) Weight -0.84 pounds (38 grams)Please note: A new firmware, which resolves wireless connectivity issues and other known bugs, has been released on www.linksys.com.

Buy Now

Click here for more information about Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

Read More...

Tuesday, May 1, 2012

NETGEAR WNR854T RangeMax Next Wireless-N Router Gigabit Edition Review

NETGEAR WNR854T RangeMax Next Wireless-N Router Gigabit Edition
Average Reviews:

(More customer reviews)
First, let's get a few things out of the way: I am not a newbie, I am not bitter, and I have absolutely no incentive to bash any company - Netgear included. I am writing this review because I want to prevent anyone else from making the mistake of buying this product. Why? Because it is a defective design - and, more importantly, Netgear has no idea what is wrong with it. What does that mean to you as a consumer? Your device will most likely fail. And Netgear is not likely to make it right. Here's the story:
After between 3 and 6 months of your router working perfectly, you will wake up one day and only the green power light will be on. The wireless light will no longer blink actively and the network lights will all be dead. Why you ask? Because your router has just bitten the dust. You'll unplug the router several times to reboot it, but nothing will change. Then, you'll press and hold the reset button on the back for 10 seconds or longer - just like the manual tells you to. But that won't fix it either. After a few more tries, you'll finally suspect that the thing is dead and, if you're like me, you'll go to Netgear's site and find no documentation of the problem in their knowledgebase. Then, you'll go to the trusty forums where they can't hide their problems, and you'll see hundreds - yes, hundreds - of posts by users just like you and I who are having the exact same problem. And those are only the small percentage of troubled users who actually bothered to write about it. They'll share stories of nightmare phone calls with Netgear, and some will tell you about the same problem happening to 2, and sometimes 3 replacement routers. Frustrated before you even begin, you'll probably call Netgear to confirm it all and to see if maybe you're reading outdated posts. Certainly the problem must be fixed by now. So you'll call them and get placed on hold for anywhere between 10-45 minutes while you're treated to a selection of awful music, paused only by a shameless pre-recorded message telling you how much Netgear cares about you. Yeah, right. Finally, one of the interruptions will actually end up being a real-live person. What you'll have reached is a tech support agent (friendly, but fairly useless) who will confirm the problem (but only if you're saavy enough to tell them that you already read about it online) and then they'll offer you three return options - all of which have you, as the victim, paying to ship the unit back to them (provided you are still within the 1 year warranty period). Option 1 is for you to ship it and get a replacement within 5-7 business days. The second option is for them to ship you a replacement for $16 within 5-7 business days, along with a prepaid shipping label. This way, I guess, you don't have to bother with choosing the shipping company. And, unbelievably, the third option is to have them expedite you a new unit within 2 days, for the bargain price of a brand new router. How this option is helpful to us, I have yet to figure out. But, it will be presented to you as an option nonetheless. It seems they are making a tidy little business out of selling us defective units.
After all of this, hopefully, you are still calm, cool, and collected enough to ask if they have actually fixed the problem - a logical question to be certain since you don't want to pay to replace a bad router with another bad router. And then, if you get an honest person - as I did - they'll tell you that they actually have no idea what the problem is and that the replacement router will be no different from the one you are returning. So, although I haven't quite made it this far, I'm certain that you'll be doing the whole thing over again in another 3-6 months.
So what can we learn from this little story: 1) This router is sick; 2) There is no cure; 3) Netgear doesn't care; 4) Your time is worth more than all of this.
Stand up for yourself and, if you would be so kind, for me as well. Don't buy this item. Believe me, you will regret your purchase. Remember, this is not an opinion. It is a factual account of what happened to me and to hundreds of other consumers. Don't let it happen to you too.
Thanks for listening...

Click Here to see more reviews about: NETGEAR WNR854T RangeMax Next Wireless-N Router Gigabit Edition

The NETGEAR WNR854T RangeMax Next Wireless-N Router Gigabit Edition lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 300 Mbps. You can stream music and video, make internet phone calls, videoconference, and surf the web, all at the same time.
Easy Setup The WNR854T makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WNR854T includes a stand for vertical placement.
The WNR854T employs a web-based interface for configuration for compatibility with any computer with a web browser. The firmware is also upgradeable via the web interface so you can be sure your router will always be up-to-date.
New Technology Means Blazing Speeds and Backwards Compatibility The WNR854T complies with the latest 802.11n draft specification which allows for speeds up to 300 Mbps; this maximum speed can be achieved when used with other TopDog devices. By utilizing MIMO (multiple-input, multiple-output) technology, the WNR854T has speed and range far surpassing the older 802.11g standard. The preset internal antennas ensure that the device is always tuned for optimal performance, and NETGEAR's Wi-Fi Multimedia technology optimizes audio, video, and voice applications.
If you still have computers that use 802.11g or 802.11b, don't fret as the router is backwards compatible with the older wireless standards and can be set so all your computers can connect to the network. The WNR854T will automatically figure out the connection type and work accordingly.
By using Gigabit Ethernet for the backend, you'll be certain that the router is receiving data at the highest possible speeds. The router also has four Gigabit RJ-45 Ethernet ports in the back for connecting computers to the network via a wired connection that will give the fastest performance.
Security Made Easy The WNR854T offers many security options to ensure your data is private. Double firewall protection keeps your network shielded from outside attacks. It also prevents Denial of Service (DoS) attacks.
NETGEAR's Touchless WiFi Security makes it quick and easy to set up network security on a WiFi network by asking for a passphrase from the user. The WNR854T supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption for 802.11b/g networks. Additionally, you can set security through MAC address authentication, allowing only authorized users onto the network.
The NETGEAR WNR854T RangeMax Next Wireless-N Router Gigabit Edition is backed by a 1-year warranty.
What's in the Box WNR854T RangeMax Next Wireless-N Router Gigabit Edition, power adapter, Ethernet cable, stand, setup CD, warranty/support information card.

Buy Now

Click here for more information about NETGEAR WNR854T RangeMax Next Wireless-N Router Gigabit Edition

Read More...

Sunday, April 29, 2012

D-Link DWL-G510 Wireless PCI Adapter, 802.11g, 54 Mbps Review

D-Link DWL-G510 Wireless PCI Adapter, 802.11g, 54 Mbps
Average Reviews:

(More customer reviews)
Bought this to work with a new D-Link DI-524 wireless router. Works great, with the signal cutting diagonally and through the floor of my 2-story suburban house. I am using an old 6db directional patch antenna (from Hawking Technology; I bought it years ago) and the connection is flawless. Tested in both Windows XP SP2 & Ubuntu Linux (Breezy 5.10 & kernel 2.6).

Click Here to see more reviews about: D-Link DWL-G510 Wireless PCI Adapter, 802.11g, 54 Mbps

The D-Link AirPlus G DWL-G510 PCI Adapter is a wireless PCI adapter featuring the very latest in advanced wireless silicon chip technology to deliver incredibly fast data transfer in the 2.4GHz frequency. The DWL-G510 also works with 802.11b standard wireless devices and when used with other D-Link AirPlus G products delivers throughput speeds capable of handling heavy data payloads. The D-Link AirPlus G DWL-G510 also includes a configuration utility to discover available wireless networks and create and save detailed connectivity profiles for those networks most often accessed.

Buy Now

Click here for more information about D-Link DWL-G510 Wireless PCI Adapter, 802.11g, 54 Mbps

Read More...

Sunday, September 4, 2011

NETGEAR FS605NA 5-Port Fast Ethernet Switch Review

NETGEAR FS605NA 5-Port Fast Ethernet Switch
Average Reviews:

(More customer reviews)
This switch is as advertised. It works out of the box, without any problems, setups, uplink switches, or anything else. Just plug and play.
Silent, fan-less operation. However, it does get a bit warm to the touch. If fully loaded (using all ports at high volumes of traffic) and running in warmer room, overheating may become an issue. Even so, I'll take that possibility over yet another noisy fan in my office.

Click Here to see more reviews about: NETGEAR FS605NA 5-Port Fast Ethernet Switch

The Netgear FS605 is a powerful plug-and-play switch that connects at 10 or 100 Mbps and makes it easy to link as many as five computers or peripherals to your Ethernet network. You'll experience maximum performance for 10/100 Mbps devices with five ports that automatically sense the correct speed, and Netgear's Auto Uplink feature adjusts for different types of Ethernet cables. The FS605's sleek case has lights on the front for easy monitoring. Installation into your home network couldn't be simpler and, once connected and turned on, it begins cool and silent operation--without an internal fan.

Buy NowGet 41% OFF

Click here for more information about NETGEAR FS605NA 5-Port Fast Ethernet Switch

Read More...