Showing posts with label range expander. Show all posts
Showing posts with label range expander. Show all posts

Wednesday, July 4, 2012

ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100 Review

ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100
Average Reviews:

(More customer reviews)
EnGenius ERB 9250 Range Expander
I feel it is necessary to give my review on the EnGenius ERB9250 2.4 GHZ 300 Mbps Wireless N Range Extender to help others like myself with bad wireless connections. 03-15-2011-update My Linksys WRT600N router blew the 2.4 Ghz circuit (5-6 years old), the 5.0 Ghz remained, but this is the signal that doesn't penetrate walls. I now have a new EnGenius ESR 9855G Wireless N, 2.4 Ghtz-only router. This is working fine. The remaining content is based on my Linksys WRT 600N wireless router. I have used in the past a Linksys WRE54G - G Range Expander b/g with a with a Linksys WRT54G router to the same location. I am currently running 300Mbps with an excellent signal. In the past my Linksys WRE 54 G range expander had a maximum 54 Mbps with a fair to poor signal strength, used in combination with the WRT600N router and a HP premium "N" adapter. This old setup ran typically 2-20 Mbps with a fair to poor signal.
I am technical average, below average or novice when it comes to wireless networking. After reading someone's comment maybe I'm an expert and just doesn't know it. I have spent hours enhancing locations, changing configurations, and praying for a decent signal. I have by pure accident discovered solutions to problems that no one ever addresses. I've come to the conclusion that the advanced techs out there work for the manufactures sales department and really don't understand wireless systems and their wireless routers. Very seldom can you actually talk with someone. If you do get a hold of someone, they seem to know a lot less than me, which is frightening.
I have a home office in a separate building from my home. The nearest exterior stucco wall to exterior stucco wall is 17 feet. I have my WRT600N (now ESR 9855G) wireless router in my family room which is a straight 49 feet from my EnGenius ERB9250 Range Expander in my office. The Range Expander is 7 feet from my computer. The signal is going through 3 walls with windows.
I am writing to help people like myself.
Number 1 -Important Things That All Web Sites Stress -you can just ignore. You REALLY DO NOT need to pay attention to: 1) line of sight (you shouldn't have obstacles) between the router and the range expander. They must be living in a tent, but I really don't know anyone that is so lucky as to not have obstacles i their way. DUMB LESSONS are important lessons or information I have learned creating a decent wireless network and is probably more information than what you need. DUMB MISTAKES are mistakes I made, but because of frustrations, and trying to think logically when I am tired and frustrated; these mistakes have eaten a tremendous amount of my time and were quite easy to fix.
Dumb Lesson #1 the 2.4 GHz setting is to broadcast all Wireless N, Wireless G, and Wireless B systems all at the same time on all this same frequency. REMEMBER THIS RANGE EXPANDER (WRT600N) IS USING ONLY THE 2.4GHz part of the Wireless Router, not the 5.0GHz. My new router only broadcasts in 2.4 GHz. I originally thought that 5.0 Ghz was only N systems, and 2.4 Ghz was only B or G systems, wrong. 2.4 can be for all three. A, B, G, and N are just standards. N is the most recent allowing higher transfer speeds and more unused frequencies. The frequencies are by far the most misunderstood.
Dumb lesson # 2, Misinformation is very prevalent even from known authorities. Just remember, this is part of the problem we all deal with and affects our judgment, when we try to make improvements to our wireless networks. The higher the frequency the more likely it will penetrate walls. This is the complete opposite from what all the wireless geeks say. 5.0 GHz will do better than 2.4GHz going through walls. This is straight from my engineer father-in law who helped put the lander on the moon. So ignore what is being said by so called experts, I am a wireless novice with real scientific information. 5.0 GHZ has less distortion from other electronic products in your home. Therefore it has a clearer less obstructed and distorted signal from other household devices. Items that can overlap the 2.4 GHz are: wireless telephones, remote controls, wireless game controls, microwaves, and many more. Ignore this concern. Using a wireless G router, my 2.4 GHz cordless phone blocked all wireless signals. I bought a new DECT 6.0 phone. No more problems. WHY 5.0 Ghz APPEEARS TO BE WORSE is that 5.0 Ghz takes an extremely large amount of power to go the same distance as 2.4GHz, which the best consumer wireless routers don't have. The router and adapters signals are really going around walls and through windows to best of their abilities. My need has been getting my wireless signal to a far distance with a decent signal and decent speed. The 2.4 GHz is the only way to go with the "N" standard setting allowing the faster transfer rates up to 300 Mbps and a much longer distance with a range expander. Maybe someday 5.0 Ghz wireless routers with be available with more power, but don't count on it with all the energy efficiency requirements.
For the WRT 600 N wireless router:
A) Get access to your router through the IP address using your web browser at 192.168.1.1, click on the "Wireless" button next to "Set Up" - Basic Wireless settings the 5.0 GHz setting the 3 bottom categories for Radio Band, Wide Channel, Standard channel set all of them to AUTO. The Basic Settings for the bottom 2.4 GHz are Standard 20 MHz, Auto, and Auto. Under the 5.0 GHz -Wireless Mode setting, set it to Wireless N, Network Name SSID to something similar to your original network you have chosen, such as Digital add underscore media so you know what name you are looking for "Digital_media" and your regular Network to "Digital".
B) Under 2.4 GHz set the Wireless Mode to "Mixed." "Mixed" allows everyone in your network to use your Wireless Network no matter what kind of adapter they have (a, b, g, and n) for their computer. This is probably the biggest mistake and most misunderstood setting.
Dumb lesson # 3, I learned that the Dual Wireless Adapters will LOOK FOR MORE THAN ONE NETWORK AT THE SAME TIME, hence the name DUAL.
C) You need to set up your wireless adapters that are dual G & N adapters on each computer to do just that, by going to Control Panel, "Network" or "Network and the Internet", you need to get into the network adapter setting. It is very easy in Windows XP and Windows 7, which is what I use. The web also has good details on doing this.
D) If you have a Wireless Router N router always use security at least WPA2-Personal and give each of your network users the password, set the encryption at "AES". It is easiest to use the same password for 5.0 GHz as well as 2.4GHz. Remember old "B and A" standard adapters don't allow encryption. If you are using Older Network Adapters in your network of computers you can't have a WEP or WPA security password. The old computers and adapters don't allow encryptions and won't be able to connect to you network. My new ESR 9855G router allows up to 4 accounts using the same setup and guest users. I enable an additional account with a simple password for my visiting clients and friends and then uncheck the additional account box when they leave so it doesn't disrupt the 4 users and 2 businesses at my home.
CONTINUEING
Dumb lesson #4, The real reason the N standard is important is the transfer rates and MIMO. MIMO (Multiple Input, Multiple Output) refers to the ability of 802.11n and similar technologies to coordinate multiple simultaneous radio signals. MIMO increases both the range and throughput of a wireless network.
Dumb Lesson # 5, My wife would come to visit in my home office (separate building) in the late morning to see how my day was going. When she left my wireless signal disappeared. I was beginning to think she was really from Venus. This went on for 2 months and had me totally baffled. Solution - when she came to visit me in the morning I had my sliding glass door closed to keep the heat in the office. In the late morning after warming up outside, she left my office by opening the sliding glass door and closing the screen door behind her and saying, "enjoy the nice weather outside." My wire screen door was blocking my signal. I went down to the hardware store and replaced my screen with a heavy duty pet screen material made of some tough durable synthetic rubber/fiberglass material and I had my solution and signal back. I also replaced 2 other screen doors in my house, because of this issue. The signal strength did improve significantly.
DUMB MISTAKES WHEN TIRED AND SETTING UP THIS WIRELESS RANGE EXTENDER
Dumb mistake #1, I tried to setup my Wireless ERB9250 Range Expander using the "Manual Configuration," I plugged the LAN connection into the back of the wireless router for a network connection. Then I tried to go to the ISP 192.168.1.2. Wrong you must plug it into the wired LAN connection in the back of your computer's wired LAN connection. I had to reread the booklet. The online booklet doesn't specify this.
Dumb mistake #2, When I resolved my dumb mistake #1, and plugged it into the LAN connection, I went to ISP 192.168.2 and it wouldn't connect. It just said Windows Internet Explorer connection is not available. After scratching my head a few minutes, it dawned on me that I had to connect to the wired LAN (Local Area Network), not the wireless LAN. So I disabled the wireless adapter and allowed the computer to connect to LAN with ISP 192.168.1.2 and then followed the directions in the booklet. Note: it may be easier to print out the setup booklet online at EnGenius web site than to read the small size 6 font in the booklet, especially at night (see the missing note on the...Read more›

Click Here to see more reviews about: ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100



Buy Now

Click here for more information about ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100

Read More...

Monday, May 21, 2012

D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point Review

D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point
Average Reviews:

(More customer reviews)
I bought another one of these to repeat my existing 900AP+'s signal to extend the range of my wireless network. It works great since I set it all up 2 weeks ago. I am not able to go all the way out to my backyard by the pool and still have Internet access on my laptop. This is very convenient when swimming or just laying and you get the urge to look something up on the Internet, but usually you don't because the PC is so far away. Not anymore. I am now able to bring my laptop out with me and maybe watch a DVD outside while I BBQ or just drink with my friends.
The repeater function looks like it only repeats other D-Link products. It also brings the speeds down to 11Mbps when you are connected to the network via the repeater. If you can get a signal with the main AP, then you are able to maintain your 22Mbps speeds.
Everything else about this AP has worked great for me as well and I'd highly recommend it.

Click Here to see more reviews about: D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point

The D-Link AirPlus DWL-900AP+ can be configured to perform in any one of four modes--as a wireless access point, as a point-to-point bridge with another access point, as a point-to-multipoint wireless bridge, or as a wireless client. It also includes an embedded DHCP server that, once enabled, will automatically assign IP addresses to wireless clients. It also eliminates the need for a separate DHCP server on the network. This unique feature is ideal for quickly creating a wireless local area network in offices or other workplaces, or a temporary network at trade shows or other events.
The DWL-900AP+ also features 256-bit WEP encryption for a higher level of security for your data and wireless communications.
The DWL-900AP+ is fully compatible with the IEEE 802.11b standard, making it interoperable with all existing 802.11b-compliant devices. But unlike standard 802.11b access points, its data transfer rate can be up to 20 percent faster. When your wireless network is comprised of other D-Link AirPlus products, such as the DWL-520+ wireless PCI adapter, the DWL-650+ wireless CardBus adapter, and the DI-614+ wireless router--transfer rates can be as high as 22 Mbps.

Buy Now

Click here for more information about D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point

Read More...

Thursday, April 26, 2012

Cisco-Linksys Wireless-G Range Expander WRE54G Review

Cisco-Linksys Wireless-G Range Expander WRE54G
Average Reviews:

(More customer reviews)
If you're having trouble setting it up, definitely call the 800 number as opposed to going online. I tried with three different people through their website online and none could help. Right before I sent it back I decided to try phone support and it got the expander a reprieve. I've copied some instructions that Y.A. Escalante was kind enough to leave in his review, but corrected and elaborated some of the items based on my experience. I would've given this 4 stars, but I deducted 1 for it not having clear enough instructions with its initial shipping. (Would've saved Linksys some headaches)
Here goes:
1-Disable WEP on your Router or AP
2-Hold the auto-configuration button for 30 seconds(if everything goes well both lights on the expander will turn blue) and unplug while still holding button. Plug back in after 10-15 secs.
3-open your Internet explorer browser and type 192.168.1.240 (default ip of expander), a window will pop up. leave the user name blank and put admin as a password (this is default password).
4-make sure that the default gateway and subnet mask settings are identical with your Router or AP,change password on the expander if desired & save settings. (all settings should be correct due to auto configuration)
5-Enable WEP on the expander, once again remember use same settings as in your Router or AP, save settings again.
6-Go to your Router or Ap settings and enable WEP. Bang you're DONE. Enjoy
Hope this helps some of you...if not call the 800 number on the box and be patient. :)

Click Here to see more reviews about: Cisco-Linksys Wireless-G Range Expander WRE54G

Expand the range of your wireless network The Linksys Wireless-G Range Expander is the easy way to increase the effective coverage of your wireless network. Unlike adding a traditional access point to your network to expand wireless coverage, the Wireless-G Range Expander does not need to be connected to the network by a data cable. Just put it within range of your main access point or wireless router, and it bounces the signals out to remote wireless devices. This relay station or repeater approach saves wiring costs and helps to build wireless infrastructure by driving signals into even those distant, reflective corners and hard-to-reach areas where wireless coverage is spotty and cabling is impractical. The Range Expander is perfect to help cover large areas in multi-story homes, warehouse environments, public spaces, wireless Hot Spots, and outdoor venues -- anywhere you need extra coverage for your wireless network.

Buy Now

Click here for more information about Cisco-Linksys Wireless-G Range Expander WRE54G

Read More...

Saturday, March 24, 2012

NETGEAR WGXB102NA Wireless G Router Wall Pg Review

NETGEAR WGXB102NA Wireless G Router Wall Pg
Average Reviews:

(More customer reviews)
I use a wireless router in the house with great success. However, the range is pretty weak or my house is too big, and I am pretty sure it's not the latter. As a result, I researched a variety of solutions, none of which seemed too appealing to implement (bridges, wireless range extenders, new RF antenna, etc). It just all seemed too complicated, and I consider myself pretty tech savvy.
Fortunately, I was reading through some tech reviews and stumbled upon the Netgear Wireless wall-plugged router kit. It seemed like it was pretty simple to setup and easy to use. Well, I can report that it is exactly that.
There is no software to install at all. You simply plug in the ethernet cable from the cable modem in one room into the Netgear plug and then plug that into the wall. Check that all three green lights are lit and you are good to go.
The next step is to take the second half of the Netgear plug into the desired room in the house and plug it into an electric socket. When its three lights are lit, you have a connection and are good to go in there. My laptop computer picked up wireless signal immediately and I was surfing the web in no time flat. Basically, it was flawless.
So, WHY am I am only giving it four stars? Two reasons:
First, the wireless range of the Netgear plug is pretty weak. It definitely doesn't have the power of my main wireless modem. Then again, it doesn't have an antenna AND it still works, so it's no big deal; it's just not perfect.
Second, the Netgear plugs need to be plugged in somewhat near each other to function correctly and get the Homelink green light to turn green. When the Netgear plugs were plugged in on opposite ends of the house (what I was hoping for to maximize range), it did not achieve a homelink connection. However, when I moved the plugs to outlets that were closer together (but still outside my wireless routers range), it DID work. So, partial credit again here. While I cna't explain why it did not work, perhaps the electrical homelink signal degrades the farther the outlets are apart.
Anyway, everything is working pretty smoothly now and I am excited that I can get a signal in another area of the house that was not covered by internet previously.

Click Here to see more reviews about: NETGEAR WGXB102NA Wireless G Router Wall Pg

The NETGEAR WGXB102 Powerline Wireless Range Extender includes everything you need to provide wireless access to an existing network using only power outlets. You can now extend an internet connection to even the farthest reaches of your home without a tangled mess of cables.
Elegant Design and Simple to Install The WGXB102 is a kit that comes with two devices, the Wireless Range Extender (WGX102) and the Powerline Network Bridge (XE102).
The WGX102 is a small silver-colored box with rounded edges that has no wires or ports of any sort. Installation is truly plug and play: simply plug the device into the outlet and you have a wireless network originating from that spot.
The XE102 is a similarly shaped box that connects from an existing wired or wireless router to the power line. It then sends a network connection between connected NETGEAR Powerline devices. In addition to the included WGX102, other compatible devices include NETGEAR's XE104, XE103, XEPS103, and XE102, all sold separately.
Fast and Secure The WGX102 complies with both the Homeplug 1.0 and 802.11g wireless standards for compatibility with a wide range of devices. Since 802.11g is backwards compatible with 802.11b, you don't have to worry about your older devices that might not yet support the newer standard. The WGX102 supports 64-bit and 128-bit WEP encryption as well as WPA so you can be sure your data is safe from prying eyes. Additionally, it has VPN (IP-Sec and PPTP) passthrough, as well as the option to turn Wireless SSID broadcast on and off.
The NETGEAR WGXB102 Powerline Wireless Range Extender is backed by a 2-year warranty.
What's in the Box WGX102 wireless range extender, XE102 Powerline network bridge, ethernet cable, two setup CDs, installation guide, and warranty/support information card.

Buy Now

Click here for more information about NETGEAR WGXB102NA Wireless G Router Wall Pg

Read More...

Tuesday, March 13, 2012

+9dB "Linksys" 15" Booster Antenna (Pair) Review

+9dB Linksys 15 Booster Antenna (Pair)
Average Reviews:

(More customer reviews)
I have always purchased genuine Linksys high-gain antennas in the past, for my Linksys wireless routers and access points, but I recently had the opportunity to try these 15" +9dB booster antennas provided by WiFi World, and I couldn't be happier with the results. These antennas, which are sold as a pair, have a standard TNC connector (female type), and connects easily to the Linksys WAP11 and WAP54G wireless access points. However, the newer revisions of the WRT54G and WRT54GS wireless routers no longer have user replaceable antennas, so you should check the back of your router before purchasing ANY antennas for these models.
As with any Omni-directional antenna, this +9dB model boosts signal strength on a horizontal plane. The do not offer much signal boost between floors of your home or office building. I think many people that purchase high gain antennas expect they will be able to add them to provide signal enhancement for multiple levels of a building. Although some amount of signal boost may reach a floor above or below your router, it is the strength across the same level of the building (or extending outside the building) that gets the biggest increase. I have a Linksys WRT54G wireless router on the lower level of my home, which does not have removable antennas. To achieve a better Wi-Fi signal to the upper level of my home I installed a Linksys WAP54G wireless access point and configured it as a repeater. This provided fairly good coverage in my home, but as I use a number of wireless network security cameras throughout my house I noticed some video and audio stuttering in the far corners, where the Wi-Fi signal was at its weakest. So I installed this set of +9dB booster antennas and within a couple of minutes I had my wireless access point powered up and blasting a stronger signal both inside and outside my home. All of my security cameras now stream flawless video at 30 fps, and there are no more audio dropouts. I also get coverage for my laptop computer much farther away from the house (in the yard) than I used to.
Although not everyone may receive the same excellent results with these antennas that I have, I honestly believe they are a quality product that performs as advertised. Linksys certainly produces excellent quality high-gain antennas as well, but at less than half the cost these +9dB antennas give me just as good, if not better, results than I previously received with the premium priced Linksys antennas. Just remember, vertical boost will not be strong with this type of antenna, and placement of the router and positioning of the antennas does make a big difference in signal strength at any given distance. If you need to "focus" your signal to another floor or between buildings then you may need to look at a directional style antenna rather than this Omni-directional model. I am giving these +9dB 15" antennas 5-stars, because they exceeded my expectations and were substantially cheaper than the recommended Linksys brand. I highly recommend them to anyone looking to increase horizontal signal strength at a very reasonable price. =o)

Click Here to see more reviews about: +9dB "Linksys" 15" Booster Antenna (Pair)



Buy Now

Click here for more information about +9dB "Linksys" 15" Booster Antenna (Pair)

Read More...

Tuesday, January 17, 2012

Linksys Wireless-G Range Expander WRE54G - Repeater - external Review

Linksys Wireless-G Range Expander WRE54G - Repeater - external
Average Reviews:

(More customer reviews)
I got this unit used from a company that decided to go back to a wired network. This device is usually not needed in a home network and I eventually found I did not need it. All my computers are within a 50 foot range of the wireless router. I did find that it did boost the signal, but it only showed up as a small percentage of gain, about 5 to 10 percent. I think the gain would have been larger if a computer was beyond or near the edge of the wireless router's range. There are two Linksys Wireless-G Range Expanders, both of them have the model number WRE54G, mine also has "version 2" mentioned right after the model number. The difference in the two is significant. Version 2 has an ethernet port below the LED lights. This makes autoconfiguration easy. The other model needs to have the wireless security disabled in order for the "autoconfiguration" button to work. This one gives the option of just plugging in an ethernet connection to the router and then hitting "autoconfigure", holding it until the red LED light turns on. The ethernet cable bypasses the wireless security (both WEP and WPA). This makes a potential headache disappear. However, both of these WRE54G range extenders (version 1 and 2) were created before WPA encryption came out. If the unit does not work, it might need a firmware update. It may be possible to manually configure it, too, by going to the web browser (while the unit is on) and type the following URL: 192.168.1.240 I suspect without the right firmware, when the DCHP rotates that the unit might not update properly and you might need to the configure button every time it rotates (about every 15 to 30 minutes). It seemed one other review reflected this problem. All in all, the unit does what it is supposed to do, which is to boost signal strength to wireless computers within a network that either are outside the range of the router or near the outside edge of the router's range and some signal obstructions are present (including other networks). The configuration needs to have the range expander close to the wireless router or plugged into the router via the ethernet port. I think the unit is only designed to work with a Linksys wireless router, but may possibly work with other wireless routers if one configures it manually (it may still end up having the rotating DCHP problem mentioned earlier but maybe not). Linksys support seems helpful. Many reviews seem to have information posted on them that they got from Linksys support. In terms of how I would evaluate ease of installation. I think for some people it might be easy and for others it might be hard, depending on the firmware, and which wireless router they are using, and whether or not you have the version 2 option of plugging in an ethernet cable to configure it. I give the unit four stars because it does what it is meant to do but may have some issues with a particular network. I mainly wanted to write this review to alert people to the ethernet cable configuration method, since it was not mentioned in any other review and also the need to perhaps update the firmware (especially for WPA encryption). If it does not configure easily, you mean need to work with the manual, the support page, or call Linksys support. I found, for myself, that I just needed to plug in the ethernet cable, push the autoconfigure button, and wait 10 seconds. I double checked my success by checking the URL mentioned above. I checked the signal strength with a software signal meter and by turning the unit on and off to see if some difference registers. Oddly enough, if I put the unit too close to the computer it sometimes weakened the signal. It needs to be a little bit away and to not compete with the signal of those computers that already within serviceable range from the router. I gave "ease of installation" three stars, because it is going to go either way (one star hard or five star easy).

Click Here to see more reviews about: Linksys Wireless-G Range Expander WRE54G - Repeater - external



Buy Now

Click here for more information about Linksys Wireless-G Range Expander WRE54G - Repeater - external

Read More...

Monday, January 16, 2012

D-Link DAP-1360 Wireless N Range Extender Review

D-Link DAP-1360 Wireless N Range Extender
Average Reviews:

(More customer reviews)
It came in the mail yesterday and I had it up and running in about 15 mins. So installation gets 5 stars. And it definitely works as an extender as I am now getting full signal strength upstairs in my bedroom while the router is in the far corner of the basement. All appeared to be good until I started to do more than surf the internet. I couldn't hold a connection to my company's VPN and I kept losing connection when I tried to download podcasts to itunes. I unplugged it and I haven't seen the problem since, so it has to be the extender causing the issue. It not only causes a problem with my laptop upstairs, but any computer on the network. The D-Link forum has several complaints with the same issue, but D-link has yet to respond to these complaints. The closest I saw to a recommended fix was in their Knowledgebase - they recommended changing the "Preamble" setting to "short" (default is "long") for busy networks or for downloading large files. I will try this when I get home tonight and see if this corrects the issue.
UPDATE: 5/26/2010 - I switched the Preamble to "short" and that did nothing to solve my problem. Back to the ol' drawing board! Next stop, tech support. Ugh!
UPDATE: 6/3/2010 - I emailed customer support a week ago and have heard nothing. Also, they have failed to respond to their own customer forum regarding this same issue. Lame, very lame. They leave me no option but to return this item.

Click Here to see more reviews about: D-Link DAP-1360 Wireless N Range Extender



Buy NowGet 36% OFF

Click here for more information about D-Link DAP-1360 Wireless N Range Extender

Read More...

Monday, December 19, 2011

Hawking HSB2 HiGain Signal Booster Review

Hawking HSB2 HiGain Signal Booster
Average Reviews:

(More customer reviews)
I want to start by qualifying my comments - I'm a 16-year IT professional. I'm an MCSE (Microsoft Certified Systems Engineer) certified from Windows NT 3.51 up to present (Windows 2003). I am also an MCT (Microsoft Certified Trainer) had have taught Microsoft technologies for over 12 years.
The first thing to understand about the product line from Hawking Technologies is this: these are not Fischer Price toys. When you get into the arena of boosting signals of your wifi network...or extending...or repeating the wireless signals of your wifi network....you are dealing with intermediate to advanced technology implementation.
I am reading through the reviews on this product and there seems to be this recurring "expectation" by various people....that they are buying a fool-proof product that will install itself. Well.....that's not the case and these people bring on their own frustrations.
Hawking Technologies offers this signal booster product so that you can add it to your existing WIFI router. As such there is ALWAYS a chance of compatibility issues. There is no "magic way" to make a third-party product compatible with every vendor's router. That's just not realistic.
Still, I have recommended and installed this particular booster product for at least three dozen SMB clients (small-to-medium-sized businesses) throughout NJ and NY. I have had fantastic results with each application and have not seen a SINGLE INSTANCE where the product failed after a short time period (something I've read from some reviewers).
I have been recommending, installing and supporting this product for approximately four years now (beginning with the company's first version and now their revised implementation; which is almost identical).
Furthermore, my experience with Hawking technical support has been very good; compared to that of much larger companies (such as Dell....whom I believe have the worst technical support of any large technology vendor).
Perhaps Hawking has "outsourced" their customer service to a third-world sweat shop in India just as every other medium or large IT vendor has in the US. Don't get mad at the vendor for that, people.....get mad at your politicians and our country's legislation; which makes it profitable and financially practical for this scenario. Yes, I absolutely HATE IT when I have to deal with broken-English, non-professional and disgracefully underqualified customer support people in sweat shops. These people are earning ten cents an hour with no bathroom breaks....so what can we expect?
And with regard to the inaccurate owner's manual....well.....that is valid but NOT MAJOR!! Yes, Hawking needs to revise their installation manuals such that they are accurate and easily digestible. It's silly that they haven't remediated that problem yet; considering that the paperwork is for a best-of-class product. Still......this is ADVANCED TECHNOLOGY and people can't rely on a manual in order to make this product work for them. You may need an SMA to TNC adapter; depending on your application. Any local Radio Shack should have in stock what is needed to make it plug in. I suggest packing up both the router and the booster and bring it right to your nearest Radio Shack. Have the counter guys and gals gather up for you the couplings and cables that you need for connectivity.
What matters most of all is that this product is the best booster available for the price range and for the class of application (home usage). I have installed MANY of these into mission-critical business environments and have enjoyed outstanding results EVERY TIME.....WITHOUT EXCEPTION.
Additionally....someone mentioned a health risk associated with using this product at the maximum setting. RUBBISH!!! IN A PIG'S EYE!!! People really make me laugh. As one of my mentors once said....."The Internet is a cesspool of misinformation so beware". True indeed!
I have installed industrial, omnidirectional WIFI towers that emit a hundred thousand times the radiation as this product. These towers are only dangerous when a human stands right in front of them. From five feet away....there is no health risk. Thus, the notion that this small device is a health risk is complete made-up nonsense. Go ahead and put the device in the cage with your gerbil and it will live a long, healthy life.
Lastly....the noise that this device creates is so insignifigant....I can't believe how many people are complaining about it. You can only hear it when you're right on top of the unit so it will only be an issue if you intend on strapping the booster to the side of your head. If not (hopefully NOT!!!) there is no concerns about the noise. Put it in the corner next to your WIFI router and it won't bother anyone...I PROMISE!!
I do not give up five-star recommendations easily but Hawking Technologies is one of those companies that excels infinitely at their specialized market nitche. This signal booster is the "only show in town" and I whole-heartedly recommend it above all others. When you receive it and open the box, you will be immediately impressed by the obvious workmanship and engineering that went into it.
Not only will it improve signal strength throughout your home or office but it will improve your wifi throughput SUBSTANTIALLY in every way.
IMPORTANT NOTE: When you use a signal booster, you increase your SECURITY RISK enormously. Your neighbors may pick up on your boosted signal even stronger than their own indoor wifi router signal. You will have effectively offered your WIFI network to an extended and unwelcomed audience. Accordingly.....be SURE to revamp your wifi router's security. Use WPA instead of WEP if all your machines are compatible (WEP is, for all intents and purposes....fairly hackable). Use STRONG passwords for wifi access to your network. Be sure that your firewall is properly setup. Exercise as much security as is possible without compromising your network's functionality.
And stop thinking about it and buy this product. You'll be GLAD that you did (believe it).
PS: This is a purely objective review of Hawking Technologies' signal booster product. I'm not affiliated with the company. I simply call 'em as I see 'em.

Click Here to see more reviews about: Hawking HSB2 HiGain Signal Booster

Hawking HSB2 IEEE 802.11b/g Wi-FiSignal Booster HSB2 Wireless Access Points

Buy NowGet 21% OFF

Click here for more information about Hawking HSB2 HiGain Signal Booster

Read More...

Friday, October 21, 2011

Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater Review

Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater
Average Reviews:

(More customer reviews)
I purchase the Hawking HW2R1 repeater in an attempt to extend wi-fi coverage to areas in my home that my Netgear WNDR3700 could not reach. Setup was easy with the Hawking CD and I initially placed the repeater between my computer and router. The computer at that point was close enough to the router that internet speed was 25mb/s from the router wi-fi but dropped to 3mb/s when connected to the repeater. Hawking tech support suggested resetting the router and repeater to channels 1, 6, 9, or 11 to see if the internet speed would improve. None of these channels improved the speed. Tech Support suggested waiting a couple of weeks to see if it improves. I did not think that would work so I looked for a better solution. It appeared that the repeater could not pick up the routers wi-fi signal as well as my laptop so I decided to hardwire the repeater to the router. This worked good. When hardwired to the router the repeaters wi-fi signal would provide internet speeds of about 20mb/s. The speed at the connection going into the repeater averaged 23mb/s so I am happy with this setup. The repeater and router are now located at opposite ends of the house and each provide adequate wi-fi for half of the house. I am disappointed that I had to hardwire the repeater to get it to pick up an adequate signal. I think Hawking should provide a better antenna without having to purchase an upgrade but am happy overall with the solution to my problem. Hawking tech support also could have been more knowledgeable.
Update: Another problem that I didn't notice when I first wrote the review is that computers in my house will not connect to the internet after reboot until I unplug and restart the repeater each time. The computers will connect to the repeater but not the internet. If I disconnect the repeater then the same computers will work fine when accessing the internet directly through the Netgear router so I know the problem is in the Hawking repeater. I have tried to resolve the problem for a couple of weeks and am having a very difficult time contacting the second level of tech support at Hawking. When transferred to 2nd level support I end up being left on hold for 15 minutes and then being forced to leave a message for a return call. I have not been able to get them to call me back so I am looking for another access point to replace the Hawking HW2R1.

Click Here to see more reviews about: Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater

The Hi-Gain Wireless-N Dual Radio Smart Repeater is an advanced Wi-Fi connectivity solution that receives the signal of any 802.11b/g/n Wi-Fi network and rebroadcasts it locally within your home or office. The HW2R1 is the flagship product for Hawking's award-winning line of Hi-Gain Wi-Fi Range Extending products. Using two isolated Wi-Fi radios, the HW2R1 connects to your desired wireless Internet connection, such as a local Wi-Fi hot spot, neighborhood wireless network or office network and repeats the signal via a dedicated 300Mbps 802.11n Wi-Fi radio locally. With 3 upgradable Hi-Gain 3dbi omni-directional antennas (1 dedicated for receiving wireless signals and 2 dedicated for rebroadcasting wireless signals within your home or office) the HW2R1 can be outfitted with Hawking Hi-Gain antennas to boost the connection range with outside wireless networks as well as locally within your home or office. The HW2R1 is ideal for Wi-Fi connections to marine docks, RV parks, adjacent offices and homes with Wi-Fi networks or any other source for wireless internet connection. In addition, the HW2R1 provides security and functionality via a full featured firewall and router. The versatility of the Hi-Gain Smart Repeater makes it the perfect solution for any wireless application.

Buy NowGet 28% OFF

Click here for more information about Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater

Read More...

Thursday, September 22, 2011

Linksys Refurb Wireless-G Range Expander - WRE54G-RM / WRE54GRM (Refurbished by Linksys / Cisco with a 90 Day Linksys Warranty) Review

Linksys Refurb Wireless-G Range Expander - WRE54G-RM / WRE54GRM (Refurbished by Linksys / Cisco with a 90 Day Linksys Warranty)
Average Reviews:

(More customer reviews)

I've never surrendered on installing any piece of software or hardware. But with this puppy, I've met my match. Giving up now. Going back to working on perfecting cold fusion. Much simpler, I think.

Click Here to see more reviews about: Linksys Refurb Wireless-G Range Expander - WRE54G-RM / WRE54GRM (Refurbished by Linksys / Cisco with a 90 Day Linksys Warranty)



Buy Now

Click here for more information about Linksys Refurb Wireless-G Range Expander - WRE54G-RM / WRE54GRM (Refurbished by Linksys / Cisco with a 90 Day Linksys Warranty)

Read More...

Saturday, September 10, 2011

TL-WA730RE Wireless Range Extender 150MBPS Ap Mode 1ANTENNA Review

TL-WA730RE Wireless Range Extender 150MBPS Ap Mode 1ANTENNA
Average Reviews:

(More customer reviews)
Used this with a TP-Link WL RT TD-W8960N, configuration was a push-button experience. Plug it in, press one button, press the other bitton, and you are good to go with a secure network.

Click Here to see more reviews about: TL-WA730RE Wireless Range Extender 150MBPS Ap Mode 1ANTENNA



Buy Now

Click here for more information about TL-WA730RE Wireless Range Extender 150MBPS Ap Mode 1ANTENNA

Read More...

Tuesday, August 30, 2011

NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Range Extender Review

NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Range Extender
Average Reviews:

(More customer reviews)
I purchased 3 of these devices to set up a wireless network at one of my customers. I have been setting up networks for six years and I have set up many wired and wireless networks. The basic marketing material sound great, like it will work very well. However, the user documentation is woefully inadequate except for the reference guide which you must download from Netgear web site. Once you have the guide, you will find out how to enable WEP encryption or change the IP address on the unit. It all sounds easy, except for one thing, it doesn't work! The software can find the units on the powerline network but is incredibly flaky in connecting to those units. For example, you can ping the device a few times but then it doesn't ping for 5 minutes or so, then it does. If you make changes using the software, changing the units IP address for example, then click on apply, often that is the time it cannot connect. Then you can't ping the old address or the new one. So, you have to press the reset button and start over. The building that I set this network up in was built in the last 5 years, so the electrical wiring is up to code and not creating the problem.
The basic Netgear setup assumes that you don't have more than one device (they all default to the same IP address and it's very time consuming to change the address because the connection is so flaky!)and you don't care about enabling any encryption. Yeah, that's great if you want to give your neighbors wireless access to your computer and your web connection. I don't think most people would want to do that. I worked with 3 units and a wireless bridge device (the required Netgear XE102) for about 5 hours and could get it to work but only on an unacceptably intermittent basis. I would strongly recommend that you not buy this product since it will only create a lot of frustration and suck up lots of your time and then, not work consistently. Or you could just use it without any encryption or security. Uh, wait a minute, you probably shouldn't do that!

Click Here to see more reviews about: NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Range Extender

The NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Range Extender makes it easy to create a wireless network anywhere you have an electrical outlet. This makes it feasible to extend an internet connection to even the farthest reaches of your home without a tangled mess of cables.
Elegant Design and Simple to Install The WGX102 is a small silver-colored box with rounded edges that has no wires or ports of any kind. Installation is truly plug and play: simply plug the device into the outlet and you have a wireless network originating from that spot.
Note that the use of this device requires the separately sold NETGEAR XE102 Wall-Plugged Ethernet Bridge, which connects from an existing wired or wireless router to the power line.
Fast and Secure The WGX102 complies with both the Homeplug 1.0 and 802.11g wireless standards for compatibility with a wide range of devices. Since 802.11g is backwards compatible with 802.11b, you don't have to worry about your older devices that might not yet support the newer standard. The WGX102 supports 64-bit and 128-bit WEP encryption as well as WPA so you can be sure your data is safe from prying eyes.
The NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Range Extender is backed by a 1-year warranty.
What's in the Box WGX102 54 Mbps wall-plugged wireless range extender, resource CD, installation guide, ethernet cable, warranty/support information card, and "read me" flyer.

Buy Now

Click here for more information about NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Range Extender

Read More...

Tuesday, August 23, 2011

D-Link DWL-800AP+ Wireless Range Extender, 802.11b, 22Mbps Review

D-Link DWL-800AP+ Wireless Range Extender, 802.11b, 22Mbps
Average Reviews:

(More customer reviews)
Despite what some folks may tell you, this product will definitely work (and work well) with the Linksys BEFW11S4 wireless 802.11b router. Thus, I echo the comments of poster "PC Hardware Fan" from South Carolina.
Here are the steps I took to make the Range Extender work:
1. D-Link customer support is 1-877-453-5465 (they're actually pretty nice and patient with novices like me)
2. Type http://192.168.1.1 into your Internet Explorer address bar and look for the LAN Mac Address for your Linksys router (do not write down the Wireless Mac Address; the LAN Mac Address is the first of the two on the Linksys set up page). While you're at it, also retrieve your WEP encryption key (if applicable). You'll need this info to configure your D-Link range extender.
3. Go to the D-Link website, go to Support and download the version 1.9 firmware for the DWL-800AP+ onto your computer's Desktop.
4. Plug in the D-Link wireless extender into a power outlet and connect an ethernet cable between it and the Linksys router.
5. Plug your laptop/desktop computer into the Linksys router (when configuring the D-Link, you'll need to use a "wired" connection, not a wireless connection.
6. In the Network Connections page (under Control Panel) of your computer, change the properties of your Ethernet connection (right-click on Properties, then click on TCP/IP and click on Properties) to have the same IP address range as the D-Link (I used 192.168.0.5). This involves changing the default from finding IP address automatically to the manual option (then, type in IP address indicated above).
7. Open Internet Explorer (you'll get an error page) and type in http://192.168.0.30. You'll get the D-Link setup page.
8. Under the Wireless Tab, input the Linksys LAN Mac address and WEP encryption key. Save your changes by clicking Apply.
9. Under the Admin tab, upload the version 1.9 firmware. Save your changes by clicking Apply.
10. Unplug D-Link from power outlet and from router. Keep unplugged for 30 seconds.
11. Go back into the Network Connections page (under Control Panel) and reset the configuration of your TCP/IP connection to find IP address automatically. Unplug your computer from router.
12. Move D-Link and computer to where you want to set them up (I suggest 50 feet away). Plug in D-Link into power outlet (discard ethernet cable).
13. On your computer, open up your wireless configuration utility and remove any pre-existing preferred wireless connections. Hit refresh 4-5 times. Go into wireless tab and uncheck WEP encryption key automatically saved and retype your WEP encryption key manually.
14. Enjoy your dramtically-improved wireless range.

Click Here to see more reviews about: D-Link DWL-800AP+ Wireless Range Extender, 802.11b, 22Mbps



Buy Now

Click here for more information about D-Link DWL-800AP+ Wireless Range Extender, 802.11b, 22Mbps

Read More...