Showing posts with label home automation. Show all posts
Showing posts with label home automation. Show all posts

Tuesday, July 3, 2012

Linksys PLTK300 PowerLine Network Kit Review

Linksys PLTK300 PowerLine Network Kit
Average Reviews:

(More customer reviews)
My wi-fi experiences a problem in a certain part of the house. I had tried different routers including 'N' and the signal would randomly and frequently drop in this one area. I installed the PowerLine in under 30 minutes. The two computers connected have not experienced any outages ever since. Don't forget NOT to plug either unit into a power strip or APS. It will only work if the plugs are directly into the wall socket.

Click Here to see more reviews about: Linksys PLTK300 PowerLine Network Kit

The Linksys Powerline Network Kit contains a single-port Powerline Adapter, and a four-port Powerline Adapter, which let you easily create a network using the existing electrical outlets in your home. Now you don't have to drill holes in walls and climb through the attic or cellar to install network cables -- just use the wires that already run through the building.With Powerline Network Adapters, you can connect computers or any other wired Ethernet device using the HomePlug 1.0 with Turbo network standard. They also work with older HomePlug 1.0 devices. Adding devices to the network is as simple as plugging a Powerline Adapter into an electrical outlet, and connecting your Ethernet-equipped devices to the built-in Ethernet ports. Additional devices can be connected to the same network using additional Powerline Adapters plugged into any electrical outlet anywhere in the house.

Buy Now

Click here for more information about Linksys PLTK300 PowerLine Network Kit

Read More...

Saturday, April 28, 2012

Panasonic Wireless Network Camera and Pet Cam (BL-C20A) Review

Panasonic Wireless Network Camera and Pet Cam (BL-C20A)
Average Reviews:

(More customer reviews)
Compact, very easy to set up and the image is sharp and clear. Free DDNS service makes this the best buy. I have another camera, Linksys, and I had to pay for this service. I defitely will drop it when it comes up for renewal. No more Linksys camera for me!
After a few days of use..I still love it! I just found out that I can access the camera with my Mac via Firefox browser. This alone beats all other cameras in the market! Set up the motion detector to email pictures is a breeze. You can also set the camera to periodically send a picture, motion or not. The only thing that you could say it is less than the Linksys is it could not send a video. Linksys video only lasts 30 seconds anyway. Highly recommended.
8/21/08: I have 2 of these cameras and the first one (3 yrs old) just failed. It is just not powered up doesn't matter how many times I tried. I guess it is expected. It has been reliably in service for 3 yrs. I will buy it again, when Amazon has a good deal.
The camera's software works flawlessly in Mac OS. I regularly access my camera via Safari web browser. This alone beats most other camera out there. You can get to it from either Windows or Mac. I set it up to email the jpeg to my Blackberry and view the picture there. Could not figure out how to do this on an iPod though.
3/20/09: When the 2nd camera failed, I thought the power supply was the culprit. I bought a $15 power supply from W**T and guess what? It works again. So I now both of my cameras work again! If your camera failed, likely it is the power supply!
Also, I can access my cameras from my iPod touch (live) using the supplied Safari browser when I have a wifi connection. COOL!!

Click Here to see more reviews about: Panasonic Wireless Network Camera and Pet Cam (BL-C20A)

Wireless Network Camera Automatic Network Configuration, Universal Plug and Play, Set-up Wizard, Remote Pan/Tilt Control, Built in PIR motion detector

Buy Now

Click here for more information about Panasonic Wireless Network Camera and Pet Cam (BL-C20A)

Read More...

Wednesday, January 18, 2012

Smarthome 2412N SmartLinc INSTEON Central Controller Review

Smarthome 2412N SmartLinc INSTEON Central Controller
Average Reviews:

(More customer reviews)
**Sorry for the length of this but since the instructions on connecting to IPhone are hard to find, I added what I had to do so you know what you are getting**
I purchased the Smarthome 2412N with two Icon appliance modules (Icon is the economic version of the Insteon module). I was having problems with remote computer equipment that would freeze and require me to drive 50 miles to reboot. Now with SmartLinc, I can reboot the computers from anywhere. I also looked at the Schlage device but it was more expensive and required the door locking mechanism. I just wanted to control wall outlets.
The initial connection was extremely easy. I plugged the SmartLinc to the wall outlet that my DSL modem was plugged into and then actually use the pass-through to connect the DSL modem (it works with cable modem also but I am just saying what I did). I connected the SmartLinc to the modem, turned on the computer and followed the instructions. Hooking up each appliance module was simple. First, plug the module in a wall outlet. Use your browser on your home computer (connected to the same DSL modem) to connect to your Smartlinc device. DON'T FORGET TO SET UP A USER NAME AND PASSWORD! Ask the device to search for new modules. Press the button on the side of the module. And then you are connected. You can then test the module. I had no problems with either module.
Once you have the module setup, register your device. If you have a dynamic IP address, registering your device allows you to find the external IP address of your device when the address changes. [It can connect to your device only if you do not change your default port, but there is a work around below if you know the external IP address].
That is the simple part. Now the more difficult part, hooking up to your IPhone. First off, do this while at the SmartLinc device and turn on your IPhone WiFi connected to your network. Downloading the program from the ITunes store was easy. I just went to the App store application on my IPhone and typed "MobilLinc". I selected the Lite version (do this even if you plan to use Pro to make sure the program works for your situation before spending money). Once loaded on the phone, though, the problems began. You first need to put in your settings. I will save you some trouble by telling you that your Host Type is 2412N (this is not the default so you need to change it). The Username and password are the ones you set up for your device and not your IPhone or PC username and password (i would suggest using the same but then all the IT people will yell at me about security..it is just power outlets). Next, enter the local connection for your Smartlinc (the 192.***.***.** number) and if you used the Smartlinc default, you will be using port 80. If you have a wireless network with a password (like mine), you will be asked for that password when you try to sync. At this point, don't bother with external. Change the connect method to "Internal Connect" and try syncing. If it works, great, if it doesn't, then you need to visit the SmartLinc forum or call technical service. [Hey SmartLinc...you really could just put this all on a web page to make it easier for everyone].
Once that is set, then try your external connect. For me, my port 80 was already set for another device, so I had to change the external port. I also had to turn off my WiFi as this did not work when I connected to the internet when connected to the same network as the SmartLinc. The external http:// address may be difficult if you have one that changes, but I have an external fix address that follows my dynamic address. This is where you really need to be a computer whiz to make this work, but if you can find a friend or be patient with tech service, you can probably get through it. [This can and should be improved as it would be easy for SmartLinc to set up a way to control applications through a secure web page at their site].
Now since I only have two devices, I am able to get away with not upgrading to MobiLinc Pro. The ModbiLinc Lite is meant to test your connection and only allows One Scene and One Device. I was able to work around by connecting one of my devices in "My Scenes" and the other I cannot using "My Device". If you have more than two, you will need to pay the upgrade, but it is less than $20.
HOWEVER, IF YOU HAVE WEB BROWSING ON YOUR SMARTPHONE, YOU CAN AVOID ANY LIMITATION BY JUST CONNECTING DIRECTLY TO THE SMARTLINC USING YOUR EXTERNAL ADDRESS FOLLOWED BY A COLON AND THAN YOUR POT NUMBER. As an example, if my external address was 75.253.1.19 and I used port 8182 (instead of 80) as my SmartLinc port forwarding port. I can connect to the device from any browser anywhere by typing 75.253.1.19:8182 (don't forget the "http://" before the IP address) and I get all the functions as if I was at home. Still MobiLinc is a neat little application.
I am extremely happy with the way things work once I got through the set-up. I can now control my remote site from anywhere and that is an amazing thing to say. Bravo to Smarthome!

Click Here to see more reviews about: Smarthome 2412N SmartLinc INSTEON Central Controller



Buy Now

Click here for more information about Smarthome 2412N SmartLinc INSTEON Central Controller

Read More...